• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.695-702
• /
• 2002

Shotcrete (or Sprayed concrete) has been used as an important support material in New Austrian Tunnelling Method (NATM). Since the mid of 1990, permanent shotcrete tunnel linings such as Single-shell, NMT (Norwegian Method of Tunnelling) has been constructed in many countries for reducing the construction time and lowing construction costs instead of conventional in-situ concrete linings. Among essential technologies for successful application of permanent shotcrcte linings, high performance shotcrete providing high strength, high durability, better pumpability has to be developed in advance as an integral component. This paper presents the Ideas and first experimental attempts to increase early strength and bond strength of wet-mixed Steel Fiber Reinforced Shotcrete(SFRS) in sump water condition. In order to increase early strength, a new approach using high-early strength cement with liquid alkali-free accelerator has been investigated From the results, wet-mix SFRS with high-early strength cement and alkali-free accelerator exhibited excellent early strength improvement compared to the ordinary portland content and good bond strength even under sump water condition.

• 대한조선학회논문집
• /
• 제40권5호
• /
• pp.53-59
• /
• 2003

Ocean space utilization using VLFS(Very Large Floating Structures) can provide environmental impact free space by allowing sea water flow freely through the floating structure. Use of Pontoon type VLFS for that purpose needs employment of breakwaters for reduction of wave effects. Therefore, in order to maximize advantage of environmental impact free structure, the breakwater should be the one that can allow water flow freely through it, too. In this paper hydroelastic response of a pontoon type structure is analyzed considering breakwaters which allow water flow through its opening at bottom of the breakwaters. Mode superposition technique is used for solving equation of flexible body while interactions between the pontoon and breakwaters is considered based on generalized mode concept. Bi-quadratic nine node higher-order boundary element method is adopted for more accurate numerical treatment near sharp edged body shape. Performance of various combinations of breakwaters is investigated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.42-47
• /
• 2007

An analytical method for the free vibration of a flexible rectangular plate in contact with water is developed by the Rayleigh.Ritz method. The plate clamped along the edges is partially contacted with water at both sides. It is assumed that the water bounded by rigid walls is incompressible and inviscid. The wet mode shape of the plate is assumed as a combination of the dry mode shapes of a clamped beam. The liquid motion is described by using the liquid displacement potential and determined by using the compatibility conditions along the liquid interface with the plate. Minimizing the Rayleigh quotient based on the energy conservation gives an eigenvalue problem. It is found that the theoretical results can predict excellently the fluid.coupled natural frequencies comparing with the finite element analysis result.

• Nutrition Research and Practice
• /
• 제8권3호
• /
• pp.241-248
• /
• 2014

The accuracy and noninvasive nature of the doubly labeled water (DLW) method makes it ideal for the study of human energy metabolism in free-living conditions. However, the DLW method is not always practical in many developing and Asian countries because of the high costs of isotopes and equipment for isotope analysis as well as the expertise required for analysis. This review provides information about the theoretical background and practical aspects of the DLW method, including optimal dose, basic protocols of two-and multiple-point approaches, experimental procedures, and isotopic analysis. We also introduce applications of DLW data, such as determining the equations of estimated energy requirement and validation studies of energy intake.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.95-104
• /
• 2004

A series of superabsorbents based on acrylic acid (AA), sodium acrylate, 2-acrylamido-2-methylpropane sulphonic acid, N,N'-methylene bis-acrylamide (MBA) were prepared by inverse suspension polymerization. These hydrogels were further crosslinked on the surface with polyethylene glycol-600 (PEG-600). The water absorbency or swelling behaviors for these xerogels in water and 0.9% saline solutions, both under free condition and under load were investigated. Absorption characteristics of these hydrogels were found to depend on nature and concentration of crosslinker in the system. It was also found that the saline absorption was significantly improved as the incorporation of AMPS in the polymer was increased. The surface crosslinking introduced in the polymers was found to improve the absorption under load characteristics without lowering the free water absorption capacities of the polymer to a considerable extent.

• 한국식품영양과학회지
• /
• 제30권1호
• /
• pp.20-24
• /
• 2001

This study was conducted to analyze the general components and to investigate sensory evaluation of hot water extract prepared by boiling at 10$0^{\circ}C$ for 3 hr with 4-fold water. The contents of total soluble soild, non-reducing sugar, total saponin, ash and total protein were 15.95%, 6.54%, 1.735, 0.33% and 0.40%, respectively. The contents of succinic, malic and acetic acid in the extracts were 111.48 mg%, 23.67mg% and 18.36mg%, respectively. The major free amino acids and minerlas of the extract were hydroxyproline 1,290.0 $\mu\textrm{g}$%, glutamic acid 456.2$\mu\textrm{g}$% and potassium 151.35 mg%, respectively. Bitter taste in the extract was not observed, whereas sweet, sour and astringent taste were observed.

• Ocean Systems Engineering
• /
• 제8권2호
• /
• pp.183-199
• /
• 2018

The open source software OpenFOAM is utilised to simulate the water entry and hydrodynamic impact process of 2D wedges and ship hull sections. Incompressible multiphase flow solver interDyMFoam is employed to calculate the free fall of structure from air into water using dynamically deforming mesh technique. Both vertical and oblique entry of wedges of various dead-rise angles have been examined. A convergence study of dynamics as well as kinematics of the flow problem is carried out on successively refined meshes. Obtained results are presented and compared to the experimental measurements showing good agreement and reasonable mesh convergence of the solution.

• 대한화학회지
• /
• 제16권5호
• /
• pp.265-270
• /
• 1972

지방족 및 방향족 탄화수소의 수용액을 Jhon 등이 제창한 liquid water의 significant structure theory 를 이용하여 연구하였으며 Helmholtz free energy, internal energy, entropy, heat capacity 등의 열역학적 성질을 계산하였다. 계산결과는 문헌에 발표된 실험치와 잘 일치됨을 볼 수 있다

• 한국식품저장유통학회지
• /
• 제4권2호
• /
• pp.155-162
• /
• 1997

This work was designed to determine the effect of steaming-Pretreatment on Physicochemical and functional properties of roasted Polygonatum odoratum roots. Steaming treatments led to some reduction in the contents of water solubles, such as total solid, reducing sugar and free-amino nitrogen of the unroasted samples. Moreover, roasting processing caused decrease in reducing sugar and free-amino acid, with increase in total soluble solid and browning color of the samples, which showed the dependence of steaming treatment as well as roasting temperature. Electron-donating ability and nitrite-scavenging ratio of the samples were also highly developed along with roasting processing at 17$0^{\circ}C$ within 35min. Considering the physicochemical and some functional parameters of water extracts of roasted samples, roasting at above 14$0^{\circ}C$ for over 55min or at 17$0^{\circ}C$ for around 35min was recommendable for the higher quality of Polygonatum odoritum tea, which conditions were similarly adapted for both steamed and unsteamed samples.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.54-57
• /
• 2011

In this paper we present an algorithm about how to simulate two dimensional dam breaking with lattice Boltzmann method (LBM). LBM considers a typical volume element of fluid to be composed of a collection of particles that represented by a particle velocity distribution function for each fluid component at each grid point. We use the modified Lattice Boltzmann Method for incompressible fluid. This paper will represent detailed information on single phase flow which considers only the water instead of both air and water. Interface treatment and conservation of mass are the most important things in simulating free surface where the Interface is treated by mass exchange with the water region. We consider the surface tension on the interface and also bounce back boundary condition for the treatment of solid obstacles. We will compare the results of the simulation with some methods and experimental results.