• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.78-81
• /
• 2008

A numerical study of the unsteady flow in an over-expanded thrust optimized contour and compressed truncated perfect rocket nozzle is carried out in present paper. These rocket nozzles are subject to flow separation in transient phase at engine start-up and/or engine shut-down. The separation flow structures at different pressure ratios are observed. The start-up process exhibits two different shock structures such as FSS (Free Shock Separation) and RSS (Restricted Shock Separation). For a range of pressure ratios, hysteresis phenomenon occurs between these two separation patterns. A three-dimension compressible Navier-Stokes solver is used for the present study. One equation Spalart-Allmaras turbulence model is selected. The computed nozzle wall pressures show a good agreement with the experimental measurements. Present results have shown that present code can be used for the analysis of the transient flows in nozzle.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.289-292
• /
• 2008

Highly over-expanded nozzle of the rocket engines will be excited by non-axial forces due to flow separation at sea level operations. Since rocket engines are designed to produce axial thrust to power the vehicle, non-axial static and/or dynamic forces are not desirable. Several engine failures were attributed to the side loads. Present work investigate the unsteady flow in an over-expanded rocket nozzle in order to estimate side load during a shutdown/starting. Numerical computations has been carried out with density based solver on multi-block structured grid. Present solver is explicit in time and unsteady time step is calculated using dual time step approach. AUSMDV is considered as a numerical scheme for the flux calculations. One equation Spalart-Allmaras turbulence model is selected. Results presented here is for two nozzle pressure ratio i.e. 100 and 20. At 100 NPR, restricted shock separation (RSS) pattern is observed while, 20 NPR shows free shock separation (FSS) pattern. Side load is observed during the transition of separation pattern at different NPR.

• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.56-62
• /
• 2010

The interaction patterns between shock wave and boundary layer in a rocket nozzle are mainly classified into two categories, FSS(Free Shock Separation) and RSS(Restricted Shock Separation), both of which are associated with the thrust characteristics as well as side loads of the engine. According to the previous investigations, strong side loads of the engine are produced during the period of transition from FSS to RSS or vice versa. The present work aims at investigating the unsteady behavior of the separation shock waves in a two-dimensional supersonic nozzle, using experimental method and CFD. Schlieren optical method was employed to visualize the time-mean and time-dependent shock motions in the nozzle. The unsteady, compressible N-S equations with SST K-$\omega$ turbulence closure were solved using a fully implicit finite volume scheme. The results obtained show the separation shock motions during the transition of the interaction pattern.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1995년도 제5회 학술강연회논문집
• /
• pp.69-83
• /
• 1995

A great number of experimental data indicating shock-induced separation(SIS) in internal or external supersonic flows were reviewed to make clear the mechanism of SIS and to present the criterion of turbulent boundary layer separation. The interesting conclusions were obtained for the considerably wide range of flow geometries that the incipient separation is almost independent of the flow geometries, and that it is relatively unaffected by changes in gas specific heat, and boundary layer Reynolds number, Furthermore, the pressure rise necessary to separate boundary layer in external flows was found to be applicable to SIS in overexpanded propulsion nozzles. This is due to the fact that the SIS phenomenon caused by the interaction between shock waves and turbulent boundary layers is processed through a supersonic deceleration. This is, the SIS in almost all of interacting flow fields is governed by the concept of free interaction, and criterion of SIS is only a Function of upstream Mach number.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.315-319
• /
• 2009

Investigation of the lateral force fluctuations in an axisymmetric overexpanded compressed truncated perfect (CTP) nozzle for the shutdown transient is presented. These nozzles experience side-loads during start-up and shut-down operations, because of the flow separation at nozzle walls. Two types of flow separations such as free shock separation (FSS) and restricted shock separation (RSS) shock structure occur. A two-dimensional unsteady numerical simulation has been carried out over an axisymmetric CTP nozzle to simulate the lateral force fluctuations in nozzle during shutdown process. Reynolds Averaged Navier-Stokes equations are numerically solved using a fully implicit finite volume scheme. Governing equations are solved by coupled implicit scheme. Two equation k-$\omega$ SST turbulence model is selected. Unsteady pressure is measured at four locations along the nozzle wall. Present pressure variation compared well with the experimental data. During shutdown transient, separation pattern varies from FSS to RSS and finally returns to FSS. Several pressure peaks are observed during the RSS separation pattern. These pressure peaks generate lateral force or side loads in rocket nozzle.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.253-256
• /
• 2009

과팽창 상태 추력 노즐 내부의 측력(Lateral Force)발생에 대한 기초적 연구 분석을 실험적, 수치 해석적 방법으로 수행하였다. 엔진 정지 과정시 추력 노즐 내에 발생하는 압력진동을 조사하였다. 구동 압력비 변화에 따른 벽 압력 분포를 측정 및 쉴리렌 가시화를 수행하였다. RSS(Restricted Shock Separation)에서 FSS(Free Shock Separation)로 천이하는 순간 벽 압력 피크값이 발생하였다.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1143-1148
• /
• 2002

This paper analyses the transient response of a spherical elastic shell located near fee surface and impinged by spherical step-exponential acoustic shock waves. The problem is solved through extension of a method (Huang, 1969) previously formulated for the excitation in an infinite domain, which employs the classical separation of variables, series solutions, and Laplace transform technique The effect of the free surface reflection is taken into account using the image source method. The reflection of the incident wave has been treated by the same image formulation. If the reflection of the pressure field scattered and radiated by the shell is considered, the problem becomes that of multiple scattering by two spheres. However, this is in general negligible considering errors inherent from other sources and that the scattered and radiated pressure waves emanating from the shell are small. Thus, the problem is reduced to that of a structure immersed in an infinite fluid and impinged upon the origin and the image incident.

• 한국항공우주학회지
• /
• 제45권7호
• /
• pp.539-549
• /
• 2017

본 논문에서는 마하 3의 초음속 유동 환경에서의 슈라우드 분리 특성 연구를 위한 시험을 수행하였다. 시험은 분리 구조물의 시험이 가능한 수직 자유 젯 풍동에서 이루어졌다. 분리시험용 슈라우드는 시험 목적과 시험 환경에 맞게 소형화한 축소형 모델을 사용하였으며 외부 유동의 하중을 고려해 잠금/전개장치를 설계하였다. 고속카메라를 활용해 슈라우드가 전개되는 동안 슈라우드에서 생성되는 충격파 변화 양상과 슈라우드 전개/분리 거동을 기록하였다. 또 첨두부 동체 표면에는 압력센서를 적용해 슈라우드가 전개되는 동안 첨두부 표면에 작용하는 비정상 압력을 계측하였다. 시험자료 분석 결과, 슈라우드 분리기술 연구에 필요한 슈라우드 분리 영상 및 첨두부 비정상 압력 자료를 획득하였다. 아울러 외부 유동의 온도와 방향 조건에 따른 슈라우드 분리 거동과 충격파 변화 양상 그리고 첨두부 표면 압력 변화 특성을 확인하였다.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.26-31
• /
• 2003

수직 이착륙기나 로켓 등을 발사시킬 때 사용되는 제트 편향기 설계를 위한 기초 자료를 얻기 위해 축대칭 원뿔에 충돌하는 초음속 제트에 대한 연구를 수행하였다. 본 논문에서는 충격파 간섭 또는 전단층에 의한 박리 등과 같은 유동 현상을 분석하기 위해 쉬리렌 장치를 이용한 유동가시화, 표면압력분포 등을 측정하였으며, 수치해석을 통해 실험결과와 비교, 검증하였다. 유동은 원뿔 충격파와 배럴 충격파 사이에서 간섭으로 인해 발생되는 충격파 패턴이었으며, 자유제트의 구조에 따라 다양한 형상을 나타내며 표면 압력분포에 크게 영향을 미친다.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.159-165
• /
• 2003

This paper describes numerical efforts to characterize the flame-holding and air-fuel mixing process of model SCRamjet engine combustor, where a hydrogen jet injected into a supersonic cross flow and in a cavity. Combustion phenomena in a model SCRamjet engine, which has been experimentally studied at University of Queensland and Australian National University using a free-piston shock tunnel, was observed around separation region of upstream of the normal injector and inside of cavity. The results show that the separation region and cavity generates several recirculation zones, which increase the fuel-air mixing. Self ignition occurs in the separation-freestream and cavity-freestream interface.