• The Journal of Advanced Prosthodontics
• /
• 제4권2호
• /
• pp.89-92
• /
• 2012

PURPOSE. Adequate passive-fitting of one-piece cast 3-element implant-supported frameworks is hard to achieve. This short communication aims to present an alternative method for section of one-piece cast frameworks and for casting implant-supported frameworks. MATERIALS AND METHODS. Three-unit implant-supported nickel-chromium (Ni-Cr) frameworks were tested for vertical misfit (n = 6). The frameworks were cast as one-piece (Group A) and later transversally sectioned through a diagonal axis (Group B) and compared to frameworks that were cast diagonally separated (Group C). All separated frameworks were laser welded. Only one side of the frameworks was screwed. RESULTS. The results on the tightened side were significantly lower in Group C ($6.43{\pm}3.24{\mu}m$) when compared to Groups A ($16.50{\pm}7.55{\mu}m$) and B ($16.27{\pm}1.71{\mu}m$) ($P$ <.05). On the opposite side, the diagonal section of the one-piece castings for laser welding showed significant improvement in the levels of misfit of the frameworks (Group A, $58.66{\pm}14.30{\mu}m$; Group B, $39.48{\pm}12.03{\mu}m$; Group C, $23.13{\pm}8.24{\mu}m$) ($P$ <.05). CONCLUSION. Casting diagonally sectioned frameworks lowers the misfit levels. Lower misfit levels for the frameworks can be achieved by diagonally sectioning one-piece frameworks.

• The Journal of Advanced Prosthodontics
• /
• 제9권2호
• /
• pp.124-129
• /
• 2017

PURPOSE. This study evaluated the effect of span length on the adaptation of implant-supported cobalt chromium frameworks fabricated by three techniques. MATERIALS AND METHODS. Models with two solid abutment analogs at different inter-abutment distances were digitized using a laboratory scanner. Frameworks of two-, three-, and four-unit fixed prostheses were designed by a computer. Six dots with a diameter of 0.2 mm were preset on the surface of each framework. A total of 54 implant-supported cobalt chromium frameworks were fabricated by milling, selective laser melting (SLM), and cast techniques. The frameworks were scanned and exported as Stereolithography files. Distances between two dots in X, Y, and Z coordinates were measured in both the designed and fabricated frameworks. Marginal gaps between the framework and the abutments were also evaluated by impression replica method. RESULTS. In terms of distance measurement, significant differences were found between three- and four-unit frameworks, as well as between two- and four-unit frameworks prepared by milling technique (P<.05). Significant differences were also noted between two- and three-unit frameworks, as well as between two- and four-unit frameworks prepared by cast technique (P<.05). The milling technique presented smaller differences than the SLM technique, and the SLM technique showed smaller differences than the cast technique at any unit prostheses (P<.05). Evaluation with the impression replica method indicated significant differences among the span lengths for any fabrication method (P<.05), as well as among the fabrication methods at any unit prostheses (P<.05). CONCLUSION. The adaptation of implant-supported cobalt chromium frameworks was affected by the span length and fabrication method.

• 융합보안논문지
• /
• 제22권4호
• /
• pp.129-133
• /
• 2022

딥러닝 프레임워크는 현재에도 계속해서 발전되어 가고 있으며, 다양한 프레임워크들이 존재한다. 딥러닝의 대표적인 프레임워크는 TensorFlow, PyTorch, Keras 등이 있다. 딥러님 프레임워크는 이미지 학습을 통해 이미지 분류에서의 최적화 모델을 이용한다. 본 논문에서는 딥러닝 이미지 인식 분야에서 가장 많이 사용하고 있는 TensorFlow와 PyTorch 프레임워크를 활용하여 이미지 학습을 진행하였으며, 이 과정에서 도출한 결과를 비교 분석하여 최적화된 프레임워크을 알 수 있었다.

• Korean Chemical Engineering Research
• /
• 제51권2호
• /
• pp.171-180
• /
• 2013

금속유기구조체(metal-organic frameworks, MOF)는 넓은 비표면적, 규칙적인 구조 및 높게 분산된 금속 성분 등 뛰어난 물리화학적 특성으로 인해 활발한 연구가 이뤄지고 있는 다공성 물질이며, 특히 가스의 흡착, 분리 매체로서 뛰어난 성능이 보고되고 있다. MOF를 이용한 온실가스 이산화탄소의 흡착 연구는 상온 고압 영역에서 이산화탄소 저장 공정과 상온 저압 영역에서 이산화탄소 흡착 공정의 두 범주로 나눌 수 있으며, MOF의 넓은 비표면적 외에도 (1) MOF의 빈 배위결합 자리, (2) MOF의 기능화, (3) MOF의 상호 침투 효과, 및 (4) 이온 교환 효과를 이용한 연구 결과가 보고되고 있다. MOF 물질들은 비교적 낮은 수분 및 열에 대한 안정성이 문제로 제기되고 있으며, 제올라이트 유사 구조체(zeolitic imidazolate frameworks, ZIF) 또는 유기 골격 구조체(covalent organic frameworks, COF) 물질의 이산화탄소 흡착 특성이 거론되고 있다. 본 소고에서는 MOF를 이용한 이산화탄소 흡착에 대한 최근의 연구 결과를 본 연구실의 실험 결과를 중심으로 간략히 소개하고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제14권3호
• /
• pp.150-161
• /
• 2022

PURPOSE. The purpose of the study was to assess the influence of build orientations and density of support structures on the trueness of the 3D printed removable partial denture (RPD) frameworks. MATERIALS AND METHODS. A maxillary Kennedy class III and mandibular class I casts were 3D scanned and used to design and produce two 3D virtual models of RPD frameworks. Using digital light processing (DLP) 3D printing, 47 RPD frameworks were fabricated at 3 different build orientations (100, 135 and 150-degree angles) and 2 support structure densities. All frameworks were scanned and 3D compared to the original virtual RPD models by metrology software to check 3D deviations quantitatively and qualitatively. The accuracy data were statistically analyzed using one-way ANOVA for build orientation comparison and independent sample t-test for structure density comparison at (α = .05). Points study analysis targeting RPD components and representative color maps were also studied. RESULTS. The build orientation of 135-degree angle of the maxillary frameworks showed the lowest deviation at the clasp arms of tooth 26 of the 135-degree angle group. The mandibular frameworks with 150-degree angle build orientation showed the least deviation at the rest on tooth 44 and the arm of the I-bar clasp of tooth 45. No significant difference was seen between different support structure densities. CONCLUSION. Build orientation had an influence on the accuracy of the frameworks, especially at a 135-degree angle of maxillary design and 150-degree of mandibular design. The difference in the support's density structure revealed no considerable effect on the accuracy.

• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.22-31
• /
• 2022

PURPOSE. The purpose of this study was to investigate the misfit and screw preload at the implant abutment connection of implant supported fixed dental prosthesis with cantilever (ICFDP) manufactured using different digital manufacturing techniques and to compare the screw preload before and after cyclic loading. MATERIALS AND METHODS. Mandibular jaw model with four intra-foraminal implants was scanned using digital scanner. Stereolithography file was used to design a framework with nonengaging (NE) abutments and 10 mm cantilever distal to one terminal implant. Five frameworks were constructed using combined digital-conventional techniques (CAD-cast), and five frameworks were constructed using three-dimensional printing (3DP). Additional CAD-cast framework was constructed in a way that ensures passive fit (PF) to use as control. Scanning electron microscope (SEM) measured the implant abutment connection misfit. Sixty screws were used on the corresponding frameworks. Screws were torqued and pre-cyclic loading reverse torque value (RTV) was recorded. Frameworks were subjected to 200,000 loading cycles with a loading point 9 mm from the center of terminal implants adjacent to the cantilever and post-cyclic loading RTVs were recorded. RESULTS. Microscopic readings showed significant differences between frameworks. PF demonstrated the lowest measurements of 16.04 (2.6) ㎛ while CAD-cast demonstrated the highest measurements of 29.2 (3.1) ㎛. In all groups, RTVs were significantly lower than the applied torque. Post-cyclic loading RTV was significantly lower than pre-cyclic loading RTV in PF and 3DP frameworks. Differences in RTVs between the three manufacturing techniques were insignificant. CONCLUSION. Although CAD-cast and three-dimensionally printed (3DP) both produce frameworks with clinically acceptable misfit, 3DP might not be the technique of choice for maintaining screw's preload stability under an aggressive loading situation.

• 가정과삶의질연구
• /
• 제7권2호
• /
• pp.213-223
• /
• 1989

Decision frameworks for product safty policy are developed in theory and practice. Product characteristic approach and expected utility analysis are applied to situations involving risk and misinformation. Eight types of regulatory frameworks are explained and critiqued form practical purposes on behalf of consumer policy makers. Various international organizations and their roles are briefly reviewed.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제30권2호
• /
• pp.251-262
• /
• 2016

이 논문은 행과 열이 작은 정사각형으로 이루어진 직사각형 틀 구조물의 견고성에 대하여 다룬다. 수학화(mathematising)의 관점에서 각의 변화를 이용하여 구조물의 견고성 여부를 결정하는 새로운 증명법을 제시하고 이를 활용하여 구조물의 견고성을 판단하는 한 알고리즘을 제안한다.

• Journal of Information Processing Systems
• /
• 제12권2호
• /
• pp.234-248
• /
• 2016

Due to the proliferation of data being exchanged and the increase of dependency on this data for critical decision-making, it has become imperative to ensure the trustworthiness of the data at the receiving end in order to obtain reliable results. Data provenance, the derivation history of data, is a useful tool for evaluating the trustworthiness of data. Various frameworks have been proposed to evaluate the trustworthiness of data based on data provenance. In this paper, we briefly review a history of these frameworks for evaluating the trustworthiness of data and present an overview of some prominent state-of-the-art evaluation frameworks. Moreover, we provide a comparative analysis of two key frameworks by evaluating various aspects in an executional environment. Our analysis points to various open research issues and provides an understanding of the functionalities of the frameworks that are used to evaluate the trustworthiness of data.

• 한국과학교육학회지
• /
• 제15권4호
• /
• pp.429-436
• /
• 1995

The purpose of this study is to identify students' alternative frameworks about tide concept, to investigate some characters of them and students' understanding types with increasing grade in secondary school earth science course. The objective questionnaire method was used, and the subjects of this study are 528 students selected randomly in secondary school. The results are as follow. 1) Thirteen alternative frameworks about tide concept, related to the phase change of the moon and the motion of the earth are identified. 2) The alternative frameworks needed mechanical and causal reasoning have the trend reinforced or sophisticated with increasing the grade. And alternative frameworks needed phenomenal and mechanical, phenomenal and causal reasoning are changed little but ones needed phenomenal, variative and basic reasoning change scientifically. The rates of the alternative frameworks needed definitional, empirical, phenomenal reasoning decrease at the learning grade of that concept but increase after that grade. 3) Middle school students have the definitional, phenomenal, empirical and qualitative understanding types but high school students have the causal, analytic, quantitative and mechanical ones on tide concept.