• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.54-58
• /
• 2007

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for distortion variation minimization. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better visual and PSNR performances than the existing rate control method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.5
• /
• pp.868-874
• /
• 2007

A real-time frame-layer rate control algorithm with a token bucket traffic shaper is proposed for minimizing video duality variation. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize variation in distortion between frames. In order to reduce the quality fluctuation, we use a sliding window scheme which does not require the pre-analysis process. Therefore, the proposed algorithm does not produce the delay from encoding, and is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better PSNR performance than the existing rate control method.

• Journal of Internet of Things and Convergence
• /
• v.8 no.1
• /
• pp.53-58
• /
• 2022

Smoothing is a transmission plan that converts video data stored at a variable bit rate into a constant bit rate. In the study of [6-7], when a data rate increase is required, the frame with the smallest increase is set as the start frame of the next transmission rate section, when a data tate decrease is required. the frame with the largest decrease is set as the start frame of the next transmission rate section, And the smoothing algorithm was proposed and performance was evaluated in an environment where network traffic is not considered. In this paper, the smoothing algorithm of [6-7] evaluates the adaptive CBA algorithm and performance with minimum frame rate, average frame rate, and frame rate variation from 512KB to 32MB with E.T 90 video data in an environment that considers network traffic. As a result of comparison, the smoothing algorithm of [6-7] showed superiority in the comparison of the minimum refresh rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.11
• /
• pp.2009-2014
• /
• 2007

A novel method of minimizing video quality variation is proposed for a real-time frame-layer rate control algorithm with a transmission buffer. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize variation in distortion between frames. In order to reflect the buffer status, we use well-known PID control method. Computational complexity of PID control is very low, so the proposed algorithm is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better PSNR performance than the existing rate control method.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.788-798
• /
• 2009

This study aims to develop a highly reproducible, optimal frame design algorithm using variations in the curvature of armscye circumference, which will provide the basics for remodeling the 3D human body shape with the concept of reverse design used to develop total contents for the apparel industry. 1. The results of the experiment proved that ratio value was significantly efficient than absolute value of curvature variation to extract feature points in the armscye circumference 2. For the shoulder(1st and 2nd quadrant) and front armhole(3rd quadrant) parts of the armscye circumference, frame remodeling with the positive point of inflection led to the completion of a highly reproducible frame. 3. Similarly, even for the rear armhole part(4th quadrant) in the armscye circumference, it was found that frame remodeling using the positive maximum point of inflection resulted in highly reproducible body shape with the maximum point of inflection situated within the range of split angles $305^{\circ}{\sim}330^{\circ}$, while frame remodeling using simultaneously the two largest points of inflection including maximum point of inflection led to highly reproducible body shape with the maximum point of inflection out of the range $305^{\circ}{\sim}330^{\circ}$. 4. Based upon the optimal frame design algorithm developed in this study, section-specific feature points in the armscye circumference were extracted depending on the rate of curvature variation and remodeling with spline curves was conducted. The results indicate a remarkably high reproducibility(98.6%) and suggest that the algorithm developed in this study is suitable for human body modeling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.332-335
• /
• 2007

A real-time frame-layer rate control algorithm with a transmission buffer is proposed for minimizing video quality variation. The proposed rate control method uses a non-iterative optimization method for low computational complexity, and performs bit allocation at the frame level to minimize variation in distortion between frames. In order to reflect the buffer status, we use well-known PID control method. Computational complexity of PID control is very low, so the proposed algorithm is suitable for real-time low-complexity video encoder. Experimental results indicate that the proposed control method provides better PSNR performance than the existing rate control method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1505-1512
• /
• 2009

This paper propose a new frame level rate control algorithm for improving video quality and decreasing quality variation of an entire video sequence in a very low bit rate environment. In the proposed scheme, the allocated bits to a GOP are distributed to each frame properly according to the frame characteristics as well as the buffer status and the channel bandwidth. The H.264 standard uses various coding modes and optimization methods to improve the compression performance, which makes it difficult to control the generated traffic accurately. In this paper, proper prediction models for low bit rate environments are lust proposed, and a target distortion is determined using the models. According to the target distortion, the bit budget is allocated to each frame. It is shown by experimental results that the new algorithm can generate the PSNR performance better than that of the existing rate control algorithm.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.289-292
• /
• 2002

This paper provides a frame-layer method for controlling bit rate of compressed video data in real time. Our approach is easy to operate and can store encoded video data in real time without deteriorating the quality of an image. To provide ameliorated and consistent visual quality, a new concept named SOP (Set Of Pictures) and a new quantization parameter variation control algorithm based on a second-order rate-distortion model 〔2〕 are introduced. The total bit-budget is allocated efficiently to cope with unpredictable recording time by using the proposed algorithm and it is distributed to each frame. In the end, we show improved and consistent video quality with experimental results obtained from C-model of a MPEG-4 (simple-profile) encoder.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.15-20
• /
• 1997

This study is to investigate the behavior of fatigue crack growth with ATOS 55 steel which can be applied to the commercial car Dump Frame. It is to obtain the material coefficients after tensile and fatigue crack growth test with the variation of thickness or heat treatment. Also, that is proved the Pari's law by experiment. The summarized results are as follows ; 1) Increasing thickness, tensile and yield strength measured highly regardless to heat treatment and measured lowly as variation of heat treatment temperature. 2) Specimen of thickness 8.0㎜ measured the faster of crack growth rate than another thickness according to the results of experiment. It was the different of stress conditions in crack tip. 3) It was found that the experimental constant m was range of 2∼5 to the relationship between fatigue crack growth rate and stress intensity factor range. Also, it was to prove the Paris's law by the experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1582-1588
• /
• 2007

According to recently presented QoS architecture by 3GPP, a traffic conditioner may be deployed to provide conformance of the negotiated QoS. In this paper, a real-time frame-layer rate control method which can be applied to the traffic conditioner of 3GPP is proposed. The proposed rate control method uses an efficient frame skipping algorithm method for low computational complexity, and performs bit allocation at the frame level to minimize the average distortion over an entire sequence as well as variations in distortion between frames. The proposed algorithm does not produce time delay from encoding, and is suitable for real-time low-complexity video encoder.