• 제목/요약/키워드: Frame Works

검색결과 272건 처리시간 0.034초

공동주택 공기단축을 위해 개발된 조강 콘크리트의 강도 발현 특성에 관한 연구 (An Experimental Study on Strength Properties of Early Strength Concrete for Reduction of Working Period in Apartment)

  • 정양희;이재현;금경훈;이원암;김선만
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.157-160
    • /
    • 2009
  • The decision of the Form removal time which leads the early assuring strength of the concrete from Apartment construction is the fact which is important from Reducing the period of works and the economical efficiency side. Especially, with Complex building of recent times the same Tall building and Multiple Apartment Site which only follows in upgrade of interior construction of apartment site and shortening the frame construction period becomes very, importantly is the actual condition where the effort which is various for this is attempted. But is caused by with limit and economical efficiency problem of case concrete early strength revelation of most and is not put to practical use is the actual condition. Develops concrete mixture which is a utility from the research which sees hereupon and the effect which is economic leads construction duration shortening under maximizing boil.

  • PDF

코디네이터 기반 RFID 리더 충돌 회피 프로토콜 (A Coordinator-based RFID Protocol to Avoid Reader Collision)

  • 양훈기
    • 한국정보통신학회논문지
    • /
    • 제14권2호
    • /
    • pp.321-328
    • /
    • 2010
  • 본 논문은 수동형 RFID 시스템에서 리더 충돌을 회피시킬 수 있는 코디네이터 기반 TDMA 프로토콜을 제시한다. 제시한 프로토콜에서는 코디네이터가 포아송 분포로 네트워크에 참여하는 리더에게 슬롯을 효율적으로 할당하고 관리하여 빈 슬롯 발생을 최소화하며 프레임 크기 제한을 통해서 네트워크에 참여하는 리더의 대기 시간을 줄 일 수 있다. 제안된 프로토콜은 이동식 및 고정형 RFID 네트워크 형태로 구현이 가능하며 이를 위한 프레임 및 슬롯구조를 제시한다. 모의실험을 통해서 제시한 프로토콜이 성공적으로 동작하며 특히 프레임 크기의 한계 값과 네트워크에 참여하는 리더의 통계적 분포가 총 슬롯 및 리더의 평균대기 시간에 결정적인 역할을 함을 보인다.

사례분석을 통한 모듈러 건축의 현장 작업자 안전관리 체크리스트의 분류 체계 제안 (Proposal of a Classification System of Checklists for Safety Management of On-Site Workers in Modular Construction)

  • 전영훈;김균태;전은비
    • 한국건설관리학회논문집
    • /
    • 제22권6호
    • /
    • pp.120-130
    • /
    • 2021
  • 최근 정부는 건설재해 예방을 위하여 건설공사 안전관리를 강화하고 있으며, 예방적 차원의 작업자 안전관리 방안이 중요한 실정이다. 한편 모듈러 건축은 중고층 건축물 등으로 점차 확대 적용될 예정이나, 작업환경이 열악하고 안전관리가 미흡한 중소규모 건설현장이 많아 재해예방을 위한 안전관리가 미흡한 실정이다. 또한 국내 모듈러 건축의 안전관리 방안은 작업자의 안전사고에 영향을 미치나 시공오차, 하자 등 구조안전과 관련한 요소를 관리하는 품질관리에 집중되어 있어, 작업자의 안전보건을 관리하여 재해를 예방하는 작업자 안전관리는 부족한 실정이다. 따라서 본 논문에서는 국내 연구 개발된 사례들을 분석하고 전문가 자문을 통하여 도출된 모듈러 건축의 작업자 안전관리를 위한 체크리스트의 분류체계를 제안하였다. 분류체계는 공장제작, 운송, 현장시공을 대분류로 구성하였으며, 하위체계는 현장시공의 6가지의 중분류 중 모듈러 골조설치 공사의 세부작업인 양중작업과 조립작업을 중심으로, 12가지의 단위작업을 구분하였다. 그리고 안전관리를 위한 관리요소에 따른 단위작업별 작업내용을 정의하고 분류체계에 최종적으로 반영하였다. 본 연구의 결과가 모듈러 건축의 건설현장에서 효율적인 안전관리를 수행하는데 기여할 수 있기를 기대한다.

소형 무인항공기용 이동표적 표시기법에 대한기술 동향 분석 : 매개변수방식 (A Survey on Moving Target Indication Techniques for Small UAVs : Parametric Approach)

  • 윤승규;강승은;고상호
    • 한국항공우주학회지
    • /
    • 제42권7호
    • /
    • pp.576-585
    • /
    • 2014
  • 본 논문에서는 소형무인항공기용 이동표적 표시기법(MTI, Moving Target Indication)에 대한 기술 동향분석을 하였다. MTI는 크게 이미지 정렬과 차영상 오류보정 단계로 구성되는데 이중 이미지 정렬 기법에는 매개변수방식과 비매개변수방식이 있으며 본 논문에서는 매개변수방식을 사용한 이용한 MTI에 초점을 맞췄다. 소형무인항공기의 경우, 저고도 운용에 의한 시차문제가 발생하는데 이를 보정하기 위해서 등극기하학이 사용된다. MTI의 성능을 향상시키기 위한 관련기법들도 살펴보았으며 향후 발전방향을 제시하였다.

이산 시간을 고려한 시스템의 교체와 수리 비용 최적화 연구 (Optimal Periodic Replacement Policy Under Discrete Time Frame)

  • 이진표
    • 산업경영시스템학회지
    • /
    • 제43권1호
    • /
    • pp.61-69
    • /
    • 2020
  • Systems such as database and socal network systems have been broadly used, and their unexpected failure, with great losses and sometimes a social confusion, has received attention in recent years. Therefore, it is an important issue to find optimal maintenance plans for such kind of systems from the points of system reliability and maintaining cost. However, it is difficult to maintain a system during its working cycle, since stopping works might incur users some troubles. From the above viewpoint, this paper discusses minimal repair maintenance policy with periodic replacement, while considering the random working cycles. The random working cycle and periodic replacement policies with minimal repair has been discussed in traditional literatures by usually analyzing cases for the nonstopping works. However, maintenance can be more conveniently done at discrete time and even during the working cycle in real applications. So, we propose that periodic replacement is planned at discrete times while considering the random working cycle, and moreover provide a model in which system, with a minimal repair at failures between replacements, is replaced at the minimum of discrete times KT and random cycles Y. The average cost rate model is used to determine the optimal number of periodic replacement.

훼손된 도시생태계 생태복원 평가지표 제시 및 복원성과 분석 (Evaluation indicators for the restoration of degraded urban ecosystems and the analysis of restoration performance)

  • 손희정;김도희;김나영;홍진표;송영근
    • 한국환경복원기술학회지
    • /
    • 제22권6호
    • /
    • pp.97-114
    • /
    • 2019
  • This study aims to analyze the effect of urban ecosystem restoration projects by evaluating the short-term restoration performance of the project sites, from both qualitative and quantitative evaluations. In this study, for the qualitative evaluation, we derived the evaluation frame from previous studies and literature. For the quantitative evaluation, the changes in ecological connectivity after the restoration project were described using landscape permeability and network analysis. In addition, changes in habitat quality after the restoration project were evaluated by using InVEST Habitat Quality Model. These evaluations were applied to the three natural madang (ecological restoration) projects and two ecosystem conservation cooperation projects. As a result, three categories, 10 indicators, and 13 sub-indicators were derived from literature as the evaluation frame for this study. In the case of quantitative evaluation of restoration performance, habitat quality increased by 45% and ecological connectivity by 37% in natural-madang, and habitat quality by about 12% and ecological connectivity by about 19% in ecosystem conservation cooperation projects. This implies that the ecological restoration project can increase the ecological connectivity and the habitat quality of degraded sites even in a short period of time by improving the land-cover and land use. The results by applying the evaluation frame indicated that ecological and environmental factors and the ecological functions were improved by the restoration works, even though the magnitude of performances were diverse depending on the specific evaluation items, project type, and site characteristics. This study clarified that the success of ecological restoration project should be assessed by both of the short-term and long-term goals, which can be achieved by the maintenance and sustainable management, respectively.

키 프레임 특징들에 적응적 가중치 부여를 이용한 검색 성능 개선 (Improvement of Retrieval Performance Using Adaptive Weighting of Key Frame Features)

  • 김강욱
    • 한국멀티미디어학회논문지
    • /
    • 제17권1호
    • /
    • pp.26-33
    • /
    • 2014
  • 비디오 검색 및 색인은 먼저 압축 비디오에서 장면전환을 검출하여 샷(shot)으로 분리한 후 샷 내에 키프레임 특징 정보들의 유사도 비교를 통해 이루어진다. 일반적으로 내용기반 영상 및 비디오 검색에서는 컬러, 형태, 질감의 세 가지 대표적인 영상 특징들이 주로 사용된다. 그러나 여러 특징들이 결합되어 사용되는 검색 시스템이라 할지라도 각 특징들에 대한 가중치가 적합하게 부여되지 않으면 검색되는 결과 영상의 순위가 크게 변하여 검색 성능이 떨어지게 된다. 이러한 문제점을 해결하기 위해 본 논문에서는 여러 특징들이 결합되어 사용될 때 각 특징에 대한 가중치를 적응적으로 부여해서 비디오 검색 성능을 개선하고자 한다. 제안한 방법을 3,200개 키 프레임으로 구성된 비디오 데이터베이스에서 실험을 하였고 다양한 성능평가 방법을 통해 제안한 방법이 기존 고정가중치 부여를 이용한 방법과 비교하여 검색 성능이 개선됨을 볼 수 있었다.

윤곽선 정보를 이용한 동영상에서의 객체 추출 (Video Object Extraction Using Contour Information)

  • 김재광;이재호;김창익
    • 대한전자공학회논문지SP
    • /
    • 제48권1호
    • /
    • pp.33-45
    • /
    • 2011
  • 본 논문에서는 객체의 윤곽선 정보에 기반한 수정된 그래프컷(Graph-cut) 알고리즘을 이용하여 동영상에서 효율적으로 객체를 추출하는 방법을 제안한다. 이를 위해 먼저, 첫 프레임에서 자동 추출 알고리즘 이용하거나 사용자와의 상호작용을 통해 영상에서 객체를 분리한다. 객체의 형태 정보를 상속시키기 위해 이전 프fp임에서 추출된 객체 윤곽선의 움직임을 예측한다. 예측된 윤곽선을 기준으로 블록 단위 히스토그램 역투영(Block-based Histogram Back-projection) 알고리즘을 수행하여 다음 프레임의 각 픽셀에 대한 객체와 배경의 컬러 모델을 형성한다. 또한 윤곽선을 중심으로 전체 영상에 대한 로그함수 기반의 거리 변환 지도(Distance Transform Map)를 생성하고 인접 픽셀간의 연결(link)의 확률을 결정한다. 생성된 컬러 모델과 거리 변환 지도를 이용하여 그래프를 형성하고 에너지를 정의하며 이를 최소화하는 과정을 통해 객체를 추출한다. 다양한 영상들에 대한 실험 결과를 통해서 기존의 객체 추출 방법보다 제안하는 방법이 객체를 보다 정확하게 추출함을 확인할 수 있다.

2단계 최적화 방법을 이용한 비트할당 기법 (A Novel Bit Allocation Method Using Two-phase Optimization Technique)

  • 김욱중;김성대
    • 한국통신학회논문지
    • /
    • 제23권8호
    • /
    • pp.2032-2041
    • /
    • 1998
  • 비트할당 문제는 영상을 손실 부호화 하는데 있어서 가장 기본적인 것으로, 최대 허용 비트량을 초과하지 않으면서도 복원 영상의 발생 왜곡정도를 최소화 하는 것올 목적으로 하는 것이다. 이러한 비트할당 문제의 최적해를 구하는데 있어서 기존의 최적 비트할당 방법들은 동적 프로그래밍(dynamic programming) 방식에 근간하기 때문에 영상의 수가 증가하거나 움직임 보상을 이용하는 동영상 부호화의 정우에는 해를 구하기 위해서는, 그 방식이 요구하는 계산량과 메포리양이 너무 많아 최적해를 구하는데 있어서 그 한계가 있다. 본 논문에서는 기존의 최적 비트할당 방법들이 지니는 문제점들을 해결하기 위하여 '버트할당 문제의 분할' 과 '2단계 최적화 방법'을 이용하여 기존의 최적 비트할당 방법들에 비해 적은 계산량과 메모리를 요구하면서도 최적 비트할당 결과를 얻을 수 있는 방법 을 제안한다. 또한 제안한 방식을 효과적으로 근사화 할 수 있는 방법에 대해서도 제안한다. 최적 비트할당 결과는 영상 부호화 시스템의 분석, 복원화질의 최고치 파악, 효과적인 근사화 방법의 개발등에 효과적으로 이용될 수 있다. 따라서 본 논문에서 제안하는 방법은 비트할당에 관련된 분야에 효과적으로 이용될 수 있으리라 기대된다.

  • PDF

SVM을 이용한 DCT 기반의 디지털 드롭아웃 검출 (DCT-based Digital Dropout Detection using SVM)

  • 송기훈;류병용;김재면;안기옥;채옥삼
    • 전자공학회논문지
    • /
    • 제51권7호
    • /
    • pp.190-200
    • /
    • 2014
  • 전 세계적으로 방송사 및 영상 관련 기관들의 비디오 기반 시스템이 디지털로 전환되고 있다. 이송 과정에서 발생하는 디지털 드롭아웃은 콘텐츠의 질을 낮추게 만든다. 게다가 디지털 드롭아웃에 초점이 맞춰진 연구가 매우 미미하며 기존 방법들로 해결하기에는 한계점이 존재한다. 상기 이유로, 우리는 디지털 드롭아웃 블록이 가지는 독특한 패턴들의 주파수 특성을 강조할 수 있도록 이산 코사인 변환 (Discrete Cosine Transform) 계수를 기반으로 하는 새로운 특징표현 방법을 제안한다. 또한, 분류를 위해 특징 벡터를 효율적으로 활용할 수 있는 SVM 기반의 오류블록 분류방법을 활용한다. 더 나아가 이 방법은 기존 방법들의 프레임 간 연속성을 이용해 발생하는 문제점들을 극복하였다. 단독 프레임의 정보만을 이용함으로써 빠른 물체의 존재하에서도 동작이 가능하고, 특정 모델이나 추정이 필요하지 않아 최소의 복잡도 하에 오류 검출이 가능하다.