• Structural Engineering and Mechanics
• /
• v.91 no.3
• /
• pp.239-250
• /
• 2024

With the aim to provide better predication about fracture behavior, a numerical simulating strategy based on the rigid spring model is proposed for reinforced concrete (RC) structures in this study. According to the proposed strategy, concrete is partitioned into a series of irregular rigid blocks based on the Voronoi diagram, which are connected by interface springs. Steel bars are simulated by bar elements, and the bond slip element is defined at bar element nodes to describe the interaction between reinforcement and concrete. A concrete damage evolution model based on the separation criterion is adopted to describe the weakening process of interface spring between adjacent blocks, while a nonlinear bond slip model is introduced to simulate the synergy behaviour of reinforced steel bars and concrete. In the damage evolution model of concrete, the influence of compressive stress perpendicular to the interface on the shear strength is considered. To check the effectiveness and applicability of the proposed modelling, experimental and numerical studies about a simply-supported RC beam and the two-notched concrete plates in Nooru-Mohamed's experiment are conducted, and the grid sensitivity are investigated.

• Explosives and Blasting
• /
• v.39 no.2
• /
• pp.1-14
• /
• 2021

Recently, with the development of high-performance processing devices such as GPGPU, a three-dimensional dynamic analysis technique that can replace expensive rock material impact tests has been actively developed in the defense and aerospace fields. Experimentally observing or measuring fracture processes occurring in rocks subjected to high impact loads, such as blasting and earth penetration of small-diameter missiles, are difficult due to the inhomogeneity and opacity of rock materials. In this study, a three-dimensional dynamic fracture process analysis technique (3D-DFPA) was developed to simulate the fracture behavior of rocks due to impact. In order to improve the operation speed, an algorithm capable of GPGPU operation was developed for explicit analysis and contact element search. To verify the proposed dynamic fracture process analysis technique, the dynamic fracture toughness tests of the Straight Notched Disk Bending (SNDB) limestone samples were simulated and the propagation of the reflection and transmission of the stress waves at the rock-impact bar interfaces and the fracture process of the rock samples were compared. The dynamic load tests for the SNDB sample applied a Pulse Shape controlled Split Hopkinson presure bar (PS-SHPB) that can control the waveform of the incident stress wave, the stress state, and the fracture process of the rock models were analyzed with experimental results.

• Structural Engineering and Mechanics
• /
• v.31 no.3
• /
• pp.241-264
• /
• 2009

In this paper, the dynamic behavior for a group of transmission towers linked together through electrical wires and subjected to a strong ground motion will be investigated in detail. In performing the seismic analysis, the wires and the towers concerned are modeled, respectively, by using the efficient cable elements and the 3-D beam elements both considering geometric nonlinearities. In addition, to enhance the reliability and applicability of analytical outcome, a sophisticated soil-structure interaction model will be utilized in analyses. The strength capacities and the fracture occurrences for the main members of the tower are examined with the employment of the appropriate strength interaction equations. It is expected that by aid of this investigation, those who are engaged in code constitution or in practical designing of transmission towers may gain a better insight into the roles played by the interaction force between towers and wires and by the configurations of transmission lines under strong earthquake.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.38-39
• /
• 2009

The precipitate percentage and the spheroidization percentage were analyzed as a function of the tempering temperatures and the alloying elements for high strength preheat-treated steel. The optimum temperature of tempering produced the small precipitates of nano size. The precipitate percentage and the spheroidization percentage were increased with the tempering temperatures. The size of precipitate decreased as the spheroidization of carbon precipitates progressed. The alloying elements such as Cr and Mo reduced the sphereidization temperature.

• Structural Engineering and Mechanics
• /
• v.5 no.6
• /
• pp.817-837
• /
• 1997

In the present contribution an interface crack model is introduced which is capable of modelling crack initialisation and growth in aluminium as well as in Fibre Metal Laminates. Interface elements are inserted in a finite element mesh with a yield function which bounds all states of stress in the interface. Hardening occurs after a state of stress exceeds the yield stress of the material. The hardening branch is bounded by the ultimate stress of the material. Thereafter, the state of stress is reduced to zero while the inelastic deformations grow. The energy dissipated by the inelastic deformations in this process equals the fracture energy of the material. The model is applied to calculate the onset and growth of cracking in centre cracked plates made of aluminium and GLARE$^{(R)}$. The impact of the model parameters on the performance of the crack model is studied by comparisons of the numerical results with experimental data.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.173-178
• /
• 1992

Ficticious Crack Model(FCM) is one of the Nonlinear Analysis Method which is presented strictly strain softening phenomena of concrete in the fracture zone. As no stress singularities occur, it is not necessary to use special crack tip elements for this analysis. A special feature of the used method is that it explains not only the growth of existing cracks, but also the formation of new crack, as it is assumed that cracks start forming when the tensile stress reaches ft, i, e the same criterion is used for formation and propagation of cracks.

• Structural Engineering and Mechanics
• /
• v.3 no.4
• /
• pp.383-390
• /
• 1995

A 2-D four-noded finite element which contains a ${\lambda}$ singularity is developed. The new element is compatible with quadratic standard isoparametric elements. The element is tested on two different examples. In the first example, an edge crack problem is analyzed using two different meshes and different integration orders. The second example is a crack perpendicular to the interface problem which is solved for different material properties and in turn different singularity order ${\lambda}$. The results of those examples illustrate the efficiency of the proposed element.

• Transactions of Materials Processing
• /
• v.3 no.2
• /
• pp.147-155
• /
• 1994

The service life of tools in metal forming technology is to a large extent limited by wear and fatigue fracture of the active elements. This presents a basic request for tool cost minimization and reduction of extensive machine down time, caused by premature tool failure. Currents developments are dominated by steps to reduce the causes of tool failure. A main problem of forming technology remains the insufficient reliability of tools due to a large and incalculable life time fluctuation. Only a systematic investigation of the failure mechanisms and operational loading of tools can lead to future improvements in tool layout, that is optimization of tool usage.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.217-222
• /
• 1999

Usually, the failure of quasi-brittle materials is numerically difficult to describe because of the localization process with softening behavior. In this study, ADLE(Axial Deformation Link Elements) with stochastic material properties are developed to simulate the quasi-brittle material failure behavior. The ADLE method is adopted both Fictitious Crack Model and stochastic method to implement the fracture behavior with the localization behavior of quasi-brittle materials. The main objective of this paper is to show the mash independency and the capability of ADLE for the failure behavior of a quasi-brittle materials.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.385-390
• /
• 2005

A specimen with residual stress due to welding was analyzed by three-dimensional cohesive zone model. The residual stress distribution was calculated by simulating welding process, and cohesive elements were located along crack propagation planes. Crack growth is possible since two planes of the cohesive element are separated beyond a maximum load carrying capacity. Stress fields around a crack tip are compared for specimens with and without residual stresses. Load-displacement curves and crack growth behaviors are also examined.