• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.1903-1910
• /
• 2001

The BI(Ball Indentation) method has a potential to assess the mechanical properties and to replace conventional fracture tests. In this study, the BI test system has been developed to evaluate material properties. Tensile tests, fracture toughness tests, hardness tests and BI tests were performed by the system using four classes of thermally aged specimens. The results of the BI tests were in good agreement with fracture characteristics from a standard fracture test method.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.80-91
• /
• 1998

In this paper, the estimation of dynamic interlaminar fracture toughness on fracture mode II in CFRP(carbon fiber reinforced plastics) laminates in made. Dynamic ENF(End Notched Flexure) apparatus used in this paper is manufactured by suing Split Hopkinson Pressure Bar. The static and impact load history in the CFRP specimen is measured by using manufactured dynamic ENF tester and 3-point bending test is carried out to find the load history. Also dynamic interlaminar fracture toughness can be found by using the J integral obrained from dynamic analysis in consideration of intertia-force effect.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 1998년도 춘계 학술논문발표회 논문집
• /
• pp.89-97
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theorectical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit. in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tenslie test.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.25-33
• /
• 1998

In this study, under large scale yielding conditions crack propagation is found to governed by parameters based on the J-integral or on the crack opening displacement. But initiation of crack propagation of ductile material seems to be controlled by just on parameter that is the strain. The relationship between the critical value of J-integral and the local fracture strain in uniaxial tensile test in the region of maximum reduction in area. Therefore, the fundamental theoretical equation by the proposed elastic-plastic fracture toughness and the local fracture strain has a merit, in comparison with the ASTM method, which can measure by using the load-displacement curve and the specimens in tensile test.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.675-678
• /
• 2001

In this paper, an investigation was performed on the dynamic interlaminar fracture toughness of CFRP(carbon fiber reinforcement plastics). Specimens used in this experiment are CF/EPOXY laminated plates. In this experiments, Split Hopkinson s Bar test was applied to dynamic and notched flexure test. The mode II fracture toughness of each unidirectional CFRP was estimated by the analyzed deflection of the specimen and J-integral with the measured impulsive load and reactions at the supported points. As an experimental result, the vibration amplitude of 〔$0_{10}F_4/0_{10}$〕laminates appear more than that of 〔0_{10}/F_2/0_{10}$〕laminates for the J-integral and displacement velocity at a measuring point. Also, it is thought that the dynamic fracture toughness of two kind specimen with the increase of displacement velocity becomes great at a measuring point with in range of measurement.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.132-137
• /
• 2001

Miniaturized specimen technology is useful to characterize the mechanical behavior using a minimum volume of material, because it is almost impossible to sample the conventional specimen for the fracture toughness test without damage to equipment. Test material was 1Cr-1Mo-0.25V steel which was widely used for turbine rotor material. Two kinds of miniaturized impact specimens were prepared, i.e., miniaturized specimen with side groove and without side groove. The correlation between ductile brittle transition temperature(DBTT) of full size impact specimen and that of miniaturized impact specimen was made. The characteristics of miniaturized impact specimens technique as well as fracture stress were discussed. Finally, we concluded that the characteristics of fracture stress change on aging time were similar to that of DBTT.

• 한국해양공학회지
• /
• 제8권2호
• /
• pp.157-165
• /
• 1994

Effect of an accelerated iso-thermal aging (375 degree C x 66days, 375 degree C x 200days) on elastic-plastic fracture resistance curve were examined in SA533B low alloy steel. Fracture toughness test are conducted by unloading compliance method at room temperature. But the apparent negative crack growth phenomenon, usually arise in partial unloading compliance test. The phenomenon of negative crack growth may be eliminated by the offset technique. There is no effect of aging on J sub(IC) and dJ/da in iso-thermal aged (375 degree C x 66 days) specimen, but there is very little effect in iso-thermal aged (375 degree C x 200 days) specimen.

• 대한토목학회논문집
• /
• 제4권4호
• /
• pp.1-11
• /
• 1984

콘크리트의 복잡한 파괴거동(破壞擧動)을 모델할 수 있는 비선형파괴이론(非線型破壞理論)이 본(本) 논문(論文)에서 유도되었다. 본(本) 이론(理論)은 콘크리트균열끝의 파괴진행대(破壞進行帶)에서의 미세균열현상(微細龜裂現象)과 변형연화현상(變形軟化現象)으로 인한 비선형거동(非線型擧動)에 그 근거(根據)를 두고 있다. 이로부터 실제적이고도 단순화(單純化)된 파괴해석(破壞解析)모델이 유도되었으며, 이 단순화된 모델은 파괴진행대(破壞進行帶)의 변화에도 콘크리트의 파괴(破壞)에너지를 일정하게 유지할 수 있는 특정을 가지고 있다. 파괴해석(破壞解析)에 비선형응력(非線型應力)-변형거동(變形擧動)을 이용함으로써 균열면에 평행하게 작용하는 압축응력에 대한 영향이 쉽게 고려될 수 있다. 본 모델을 콘크리트의 많은 파괴실험자료와 비교한 결과 만족스러운 결과를 얻었으며, 종래의 선형파괴이론에 의한 결과는 실제 콘크리트 실험결과와 많은 차이를 보이고 있음을 알 수 있다. 콘크리트 구조의 균열 및 파괴해석에 필요한 콘크리트 파괴에너지의 근사공식이 본 이론으로부터 유도되었다. 끝으로, 철근콘크리트에 대한 파괴이론의 응용 및 확장연구 문제가 토의되었다.

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.58-65
• /
• 2007

MMF 시험을 적용하여 혼합모우드 비율을 20%～90%의 범위 내에서 변화시키면서 탄소섬유직물/에폭시 복합재의 혼합모우드 층간파괴 거동을 조사하였다. 혼합모우드 층간파괴 거동을 예측하기 위해 NL점과 5% offset점에 근거한 혼합모우드 층간파괴 결정식을 제시하였다. 파단면 양상과 균열진전 거동은 이동식 현미경과 전자현미경을 통해 조사하였다. 연구결과에 따르면 혼합모우드 층간파괴 거동은 NL점에 근거한 경우 매개변수 m=1.5와 n=0.5, 5% offset점에 근거한 경우 매개변수 m=2와 n=3인 혼합모우드 층간파괴 결정식에 의해 잘 예측되어진다. 파단면 양상과 균열진전 거동은 혼합모우드 비율에 매우 민감하게 변하며 MMF 시험은 혼합모우드 층간파괴인성의 평가에 성공적으로 적용됨을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제25권5호
• /
• pp.765-771
• /
• 2001

Elastic-plastic fracture toughness JIC can be used a s an effective design criterion in elastic-plastic fracture mechanics. Among the JIC test methods approved by ASTM, unloading compliance method was used in this study. In order to examine the relationship between fracture behavior of JIC test and AE signals, the post processing of AE signals has been carried out by Short Time Fourier Transform(STFT), one of the time-frequency analysis methods. The objective of this study is to evaluate the application of characterization of AE signals for unloading compliance method of JIC test. As a result of time-frequency analysis, we could extract the AE from the raw signal and analyze the frequencies in AE signal at the same time. AE signal generated by elastic-plastic fracture of material has some different aspects at elastic and plastic ranges, or the first portion of crack growth by fracture. First of all, increased energy recorded and detected by using AE count method increase rapidly from the start of ductile fracture. The variation of main frequency range with time-frequency analysis method could be confirmed. We could know fracture behavior of interior material by examination AE characteristics generated in real-time when elastic-plastic fracture occurred in material under loading.