Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Evaluation Method of Mechanical Properties by Ball Indentation Method

압입법을 이용한 재료 물성치 평가 기법에 관한 연구

  • Published : 2001.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

The BI(Ball Indentation) method has a potential to assess the mechanical properties and to replace conventional fracture tests. In this study, the BI test system has been developed to evaluate material properties. Tensile tests, fracture toughness tests, hardness tests and BI tests were performed by the system using four classes of thermally aged specimens. The results of the BI tests were in good agreement with fracture characteristics from a standard fracture test method.

Keywords

References

  1. 권재도, 1992. '장기사용 Cr-Mo강 열화재의 파괴인성평가와 수명 예측,' 대한기계학회논문집, 제16권, pp. 1421-1428
  2. Haggag, F. M. and Nanstad,R. K., 1989, 'Estimating Fracture Toughness using Tension or Ball Indentation Tests and a Modified Critical Strain Model,' The American Society of Mechanical Engineers PVP , Vol. 170, pp. 41-46
  3. Haggag, F. M., 1993, 'In-Situ Measurements of Mechanical Properties Using Novel Automated Ball Indentation System,' Small Specimen Test Techniques Applied to Nuclear Reactor Vessel Thermal Annealing and Plant Life Extension, ASTM STP 1204, pp. 27-44 https://doi.org/10.1520/STP12719S
  4. ASTM E 10-93, 1993, 'Standard Test Method for Brinell Hardness of Metallic Materials,' Annual Book of ASTM Standard, pp. 106-114
  5. Murty, K. L., Mathew, M. D., Wang,Y., Shah,V. N., Haggag, F. M., 1998, 'Nondestructive Determinaion of Tensile Properties and Fracture Toughness of Cold Worked A36 Steel,' International Journal of Pressure and Piping, vol 75, pp. 831-840 https://doi.org/10.1016/S0308-0161(98)00093-3
  6. Haggag, F. M., Murty, K. L., Liaw, P. K., 1997, Non-derstructive Evaluation and Materials Properties III. TMS, Warendale, PA, USA, pp. 101-106
  7. 권재도, 박중철 이우호, 박윤원, 1998, '원전기기용 CF8M의 $430^{\circ}C$ 열화 특성에 관한 연구,' 원전기기 워크샵, pp. 129-142
  8. 서창민, 윤기봉, 윤석호, 김승태, 1992, '열화시킨 ICr-IMo-0.25V강의 고온에서의 JIC및 Tmat평가,' Proceeding of the 2nd Sumposium on Material Degradation and Life Prediction, 경년열화 및 수명평가연구회, pp. 27-55
  9. Mathew, M. D, Mury, K. L., 1999, 'Non-destructive Studies and Fracture Properties of Molybdenum at Low Temperature(148 to 423K),' Journal of Materials Science, Vol. 34, pp. 1497-1503 https://doi.org/10.1023/A:1004547709783