• Archives of Craniofacial Surgery
• /
• v.12 no.1
• /
• pp.12-16
• /
• 2011

Purpose: This study examined the biomechanical stability of four different plating techniques in the experimental model of mandibular subcondyle fracture. Methods: Twenty standardized bovine tibia bone samples ($7{\times}1.5{\times}1.0cm$) were used for this study. Each of the four sets of tibia bone was cut to mimic a perpendicular subcondyle fracture in the center area. The osteotomized tibia bone was fixed using one of four different fixation groups (A,B,C,D). The fixation systems included single 2.0 mm 4 hole mini adaption plate (A), single 2.0 mm 4 hole dynamic compression miniplate (B), double fixation with 2.0 mm 4 hole mini adaption plate (C), double fixation with a 2.0 mm 4 hole mini adaption plate and 2.0 mm 4 hole dynamic compression miniplate (D). A bending force was applied to the experimental model using a pressure machine (858 table top system, $MTS^{(R)}$) until failure occurred. The load for permanent deformation, maximum load of failure were measured in the load displacement curve with the chart recorder. Results: Double fixation with a 2.0 mm 4 hole mini adaption plate and a 2.0 mm 4 hole dynamic compression miniplate (D) applied to the anterior and posterior regions of the subcondyle experimental model showed the highest load to failure. Conclusion: From this study, double fixation with an adaption plate and dynamic compression miniplate fixation technique produced the greatest biomechanical stability. This technique may be considered a useful means of fixation to reduce the postoperative internal maxillary fixation period and achieve early mobility of the jaw.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.4
• /
• pp.575-584
• /
• 2021

Objective : Cervical expansive laminoplasty is an effective surgical method to address multilevel cervical spinal stenosis. During surgery, the spinous processes of C2 and C7 are usually preserved to keep the insertion points of the cervical musculature and nuchal ligament intact. In this regard, dome-like laminectomy (undercutting of C7 lamina) instead of laminoplasty is performed on C7 in selected cases. However, resection of the lamina can weaken the C7 lamina, and stress fractures may occur, but this complication has not been characterized in the literature. The objective of the present study was to investigate the incidence and risk factors for C7 laminar fracture after C7 dome-like laminectomy and its impact on clinical and radiological outcomes. Methods : Patients who underwent cervical open-door laminoplasty combined with C7 dome-like laminectomy (n=123) were classified according to the presence of C7 laminar fracture. Clinical parameters (neck/arm pain score and neck disability index) and radiologic parameters (C2-7 angle, C2-7 sagittal vertical axis, and C7-T1 angle) were compared between the groups preoperatively and at postoperatively at 3, 6, 12, and 24 months. Risk factors for complications were evaluated, and a formula estimating C7 fracture risk was suggested. Results : C7 lamina fracture occurred in 32/123 (26%) patients and occurred at the bilateral isthmus in 29 patients and at the spinolaminar junction in three patients. All fractures appeared on X-ray within 3 months postoperatively, but patients did not present any neurological deterioration. The fracture spontaneously healed in 27/32 (84%) patients at 1 year and in 29/32 (91%) at 2 years. During follow-up, clinical outcomes were not significantly different between the groups. However, patients with C7 fractures showed a more lordotic C2-7 angle and kyphotic C7-T1 angle than patients without C7 fractures. C7 fracture was significantly associated with the extent of bone removal. By incorporating significant factors, the probability of C7 laminar fracture could be assessed with the formula 'Risk score = 1.08 × depth (%) + 1.03 × length (%, of the posterior height of C7 vertebral body)', and a cut-off value of 167.9% demonstrated a sensitivity of 90.3% and a specificity of 65.1% (area under the curve, 0.81). Conclusion : C7 laminar fracture can occur after C7 dome-like laminectomy when a substantial amount of lamina is resected. Although C7 fractures may not cause deleterious clinical outcomes, they can lead to an unharmonized cervical curvature. The chance of C7 fracture should be discussed in the shared decision-making process.

• Journal of Veterinary Clinics
• /
• v.28 no.1
• /
• pp.179-182
• /
• 2011

Two day-old male and 1 month-old female Hanwoo calves presented to Chonbuk Animal Medical Center in Chonbuk National University. Two calves were stepped by mother cow and had right (2 day-old male) and left (1 month-old female) forelimb lameness. The male calf was diagnosed as right radius-ulnar fracture through physical and radiographic examination. The other female calf was diagnosed as left third and fourth metacarpal bone fracture by the same examinations as male calf. Acrylic frame external fixator was used to reduce the fractures. Arcrylic frame external fixator in two calves lasted for 5~6 weeks. After removing the acrylic frame external fixator, radiographic evaluation and physical examination were performed. Fractured radius-ulnar and metacarpal bones were unionized and the calves were able to stand and bear weight. In these two calves, application of acrylic frame external fixator in calf fracture was effective. Acrylic frame external fixator should be considered for the repair of radius-ulnar and metacarpal bone fracture in calf.

• Journal of Trauma and Injury
• /
• v.18 no.2
• /
• pp.87-93
• /
• 2005

Background: The most frequent fracture seen at the emergency department (ED) in the elderly is a femur fracture whereas they do not know the degree of osteoporosis. We analyzed the degree of osteoporosis in patients with femur fractures and compared patients with only femur fractures (FX) to patients with femur and vertebral fractures (VX) by examining the clinical features, the bone mineral density (BMD), and biochemical markers. Methods: From January 2004 to December 2004, we enrolled prospectively 30 femur fracture patients who visited the ED. The bone mineral densities of the lumbar spine and the femur were examined. Total calcium, phosphate, alkaline phosphatase, osteocalcin, and serum C-terminal telopeptide (s-CTx) were measured. The patients with femur fractures were divided into two subgroups according to the presence of vertebral fracture. Results: All BMDs of the FX group showed osteoporosis. The s-CTx levels were higher than normal. The patients in the FX with VX were older than those in the FX only group, and had lower BMDs. There were no significant differences in markers between the subgroups, but the incidence of trochanteric fractures was higher in FX with VX group than in the FX only group. Conclusion: Femur fractures in the elderly were associated with osteoporosis. In our study, despite a considerable difference in BMD between patients with femur fractures and those with femur fractures combined with vertebral fractures, there was no difference in biochemical markers on bone formation nor in the those of bone resorption. We will further investigate the biochemical markers and BMD in the population of osteoporotic fractures. So those indicators should be helpful for planning treatment and for prevention of FX in the elderly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.497-503
• /
• 2014

Minimally invasive intramedullary nail insertion or plate osteosynthesis has shown good results for the treatment of long bone fractures. However, directly seeing the fracture site is impossible; surgeons can only confirm bone fragments through a fluoroscopic imaging system. The narrow field of view of the equipment causes malalignment of the fracture reduction, and radiation exposure to medical staff is inevitable. This paper suggests two methods to solve these problems: surgical navigation using 3D models reconstructed from computed tomography (CT) images to show the real positions of bone fragments and estimating the rotational angle of proximal bone fragments from 2D fluoroscopic images. The suggested methods were implemented using open-source code or software and evaluated using a model bone. The registration error was about 2 mm with surgical navigation, and the rotation estimation software could discern differences of $2.5^{\circ}$ within a range of $15^{\circ}$ through a comparison with the image of a normal bone.

• The Korean Journal of Nuclear Medicine
• /
• v.7 no.2
• /
• pp.37-41
• /
• 1973

Bone scanning was attempted in the five representative cases in various diseases such as primary bone tumor, inflammatory or traumatic changes, secondary metastatic bone tumor and changes in the hematopoietic system with Sr-85 which is available at this time. Each findings were correlated to the X-ray findings. Scan findings were more appreciable than the X-ray findings in elucidation of extent of bone pathology in cases of primary bone tumor and fracture cases. Especially, increased radioactivity was noted on the clinically suspected region which were not demonstrated on the plain X-rays.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.12
• /
• pp.1435-1438
• /
• 2001

A case of nonsecretory multiple myeloma in a 66 year-old-woman is reported. At first, she complained severe neck pain and radiologic finding showed C2 pathologic fracture. She complained severe low back pain 4 month later and L1 compression fracture was found. The lumbar MRI showed a 1.4cm-sized round enhancing lesion in the body of T12. Bone marrow aspiration biopsy at L1 spine showed a few polymorphous and small nests of mononuclear cell. L1 lamina bone biopsy showed many abnormal plasma cells. Pathologic diagnosis was multiple myeloma. However, plasma electrophoresis and protein immunoelectrophoresis of serum and urine of patient were normal. So, it is a nonecretory multiple myeloma case and the incidence of nonsecretory multiple myeloma is known to about 1% of all multiple myeloma.

• Journal of Veterinary Clinics
• /
• v.19 no.1
• /
• pp.49-54
• /
• 2002

Korean safflower (Carthami Flos) seed has been known to have healing effects on both bone fracture and osteoporosis. On the base of such a notice, this experiment was carried out to explore the effects of safflower seed on bone formation and bone repair. In addition, the healing mechanism was evaluated by analysing serum after feeding the seed to experimental. animals. The effect of Korean safflower seed were evaluated with 40 rats,3-month old. Forty Sprague-Dawley rats composed of 20 male and 20 female were underwent unilateral tibial defect and then fastened with unilateral fixators. The operated rats were divided into two groups depending on the composition of diet, such as positive control group fed normal diet (C-OP group) and safflower seed group fed 30% of safflower seed diet and 70% of normal diet (S-OP group). Postoperative radiographys were taken once in 2 weeks to evaluate callus formation for operated groups. In addition, a possible protein spots involved in bone recovery were examined using 2-Dimensional Gel Electrophoresis (2-DE). The comparison of the radiography between C-OP and S-OP group were showed that the safflower seed diet appeared to stimulate the formation of callus in the rat. On the images of 2-BE, it was able to identify possible five protein spots, having pl from 4 to 5 and molecular weight range from 24 to 26 kDa, involved in bone formation and repair, since no differing protein spots were found the two between groups except the five spots. No differences were observed between two groups before operation, but clear and bigger protein spots were observed from the S-OP group compared with C-OP group on 6 and 9 weeks post operation. These protein spots were, however, showed similar sizes and densities between two groups in 12 weeks later. The transformation of protein spots was suggested that these protein spots were involved in bone formation and recovery, in addition safflower seed might induce the formation of factors and activate these factors. In conclusion, this study suggest that safflower seed influence a variety of factors in the course of bone formation or the periods of remedy.

• Archives of Reconstructive Microsurgery
• /
• v.3 no.1
• /
• pp.81-89
• /
• 1994

Firstly the wrap-around free flap from the great toe was transferred successfully by Morrison and O'Brien in 1980 for reconstruction in chronic case of amputated thumb distal to the MP joint. Since then, significant bone peg resorption and grafted bone fracture have been reported in most of cases after operation. We have performed thumb reconstructions within 2 weeks after injury in 11 cases which included acute crushing injuries or failed replantation of thumb at Guro Hospital from September, 1983 to October, 1993. The results obtained from this study are as follows: 1. There were 8 males and 3 females and the mean age was 28.8 years old ranged from 3 years old to 50 years old. 2. The most common injury mechanism was machinary injury in 10 of 11 cases. 3. We have performed thumb reconstructions by using wrap-around free flap from the great toe without bone graft in 6 cases and with bone graft in 5 cases within 2 weeks after injury. 4. During 6 years and 1 month mean follow-up period, there were bone resorptions in 3, grafted bone fracture in 1, infections in 2 and soft tissue necrosis in 3 cases. 5. We obtained satisfactable results in respect of function and cosmesis and urged to use this flap for reconstruction in acute thumb injury.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.424-434
• /
• 2009

Statement of problem: Problems such as loosening and fractures of retained screws and fracture of implant fixture have been frequently reported in implant prosthesis. Purpose: Implant has weak mechanical properties against lateral loading compared to vertical occlusal loading, and therefore, stress analysis of implant fixture depending on its material and geometric features is needed. Material and methods: Total 28 of external hexed implants were divided into 7 of 4 groups; Group A (3i, FULL $OSSEOTITE^{(R)}$Implant), Group B (Nobelbiocare, $Br{\aa}nemark$ $System^{(R)}$Mk III Groovy RP), Group C (Neobiotec, $SinusQuick^{TM}$ EB), Group D (Osstem, US-II). The type III gold alloy prostheses were fabricated using adequate UCLA gold abutments. Fixture, abutment screw, and abutment were connected and cross-sectioned vertically. Hardness test was conducted using MXT-$\alpha$. For fatigue fracture test, with MTS 810, the specimens were loaded to the extent of 60-600 N until fracture occurred. The fracture pattern of abutment screw and fixture was observed under scanning electron microscope. A comparative study of stress distribution and fracture area of abutment screw and fixture was carried out through finite element analysis Results: 1. In Vicker's hardness test of abutment screw, the highest value was measured in group A and lowest value was measured in group D. 2. In all implant groups, implant fixture fractures occurred mainly at the 3-4th fixture thread valley where tensile stress was concentrated. When the fatigue life was compared, significant difference was found between the group A, B, C and D (P<.05). 3. The fracture patterns of group B and group D showed complex failure type, a fracture behavior including transverse and longitudinal failure patterns in both fixture and abutment screw. In Group A and C, however, the transverse failure of fixture was only observed. 4. The finite element analysis infers that a fatigue crack started at the fixture surface. Conclusion: The maximum tensile stress was found in the implant fixture at the level of cortical bone. The fatigue fracture occurred when the dead space of implant fixture coincides with jig surface where the maximum tensile stress was generated. To increase implant durability, prevention of surrounding bone resorption is important. However, if the bone resorption progresses to the level of dead space, the frequency of implant fracture would increase. Thus, proper management is needed.