• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.685-691
• /
• 2015

In this work, to identify effective parameter for performance of piezoelectric jetting dispenser, experimental investigation is carried out based on design of experiment. After preparing jetting dispenser using two stack-type piezoelectric actuators, basic working principle of the jetting dispenser is described. Eight operating conditions are chose as main factors and it is assumed that each factor has two levels. To reduce number of experiments for performance evaluation, the experimental sets are designed based on factional factorial design method. Experimental setup is established and the weight of single dot is measured by using precision scale. The main and interaction effects of factors are analyzed using commercial statistical program and optimal operating condition for small amount and small variation of weight of dispensed single dot are determined.

• 터널과지하공간
• /
• 제24권3호
• /
• pp.187-200
• /
• 2014

굴착 또는 발파 후 암반손상대 내 암반 물성은 응력재분배나 발파충격에 의해 영구히 약화된다. 본 논문에서는 이러한 암반손상대를 사면에 적용하였다. 손상대 유 무에 따라 2차원 모델링을 통해 암반사면의 역학적 정성을 비교하고 안전율에 영향을 미치는 인자를 분석하는 것이 본 연구의 목적이다. 모델링 결과 사면의 역학적 안정성은 손상대 유 무에 따라 현저하게 차이가 있었다. 특히 손상대를 고려한 안전율은 고려하지 않을 때 보다 약 49.4%가 감소하였다. 부분요인설계법을 이용하여 안전율에 관한 인자 분석을 실시한 결과 안전율에 영향을 미치는 주요 인자는 사면 경사, 점착력, 내부마찰각, 높이였다.

• 한국유기농업학회지
• /
• 제20권1호
• /
• pp.91-99
• /
• 2012

This study was conducted to develop a functional feed additive for pig with spent $Lycium$ $chinense$ Mill fruit. We investigated the optimum conditions for the extraction of polyphenol from spent $Lycium$ $chinense$ Mill using methanol. Methanol concentration as a solvent for extraction, extraction time and the volume of solvent per a gram of solid (ground spent Lyceum chinense Mill) were selected as parameters. Three levels of parameters were configured according to Box Behnken experiment design, a fractional factorial design, and total 15 trials were employed. Total polyphenol concentration from each trial was used as response from experiment system and effects of parameters on total polyphenol extraction efficiency were determined using response surface model. As a result, all terms in analysis of variance, regression ($p$ = 0.001), linear ($p$ = 0.002), square ($p$ = 0.017) and interaction ($p$ = 0.047) was significant and adjusted determination coefficient ($R^2$) was 94.7%. Total polyphenol extraction efficiency was elevated along increased methanol content and decreased solvent to solid ratio. However extraction time did not affect the efficiency. This study provides a primary information for the optimum extraction conditions to maximize total polyphenol recovery from spent Lycium chinens Mill fruit and this result could be applied to re-use of argo-industrial by-products and to develop of functional feed additives in organic farming.

• Journal of Microbiology and Biotechnology
• /
• 제23권3호
• /
• pp.364-374
• /
• 2013

Monacolin K and yellow pigment, produced by Monascus sp., have each been proven to be beneficial compounds as antihypercholesterolemic and anti-inflammation agents, respectively. However, citrinin, a human toxic substance, was also synthesized in this fungus. In this research, solidstate fermentation of M. purpureus TISTR 3541 was optimized by statistical methodology to obtain a high production of monacolin K and yellow pigment along with a low level of citrinin. Fractional factorial design was applied in this study to identify the significant factors. Among the 13 variables, five parameters (i.e., glycerol, methionine, sodium nitrate, cultivation time, and temperature) influencing monacolin K, yellow pigment, and citrinin production were identified. A central composite design was further employed to investigate the optimum level of these five factors. The maximum production of monacolin K and yellow pigment of 5,900 mg/kg and 1,700 units/g, respectively, and the minimum citrinin concentration of 0.26 mg/kg were achieved in the medium containing 2% glycerol, 0.14% methionine, and 0.01% sodium nitrate at $25^{\circ}C$ for 16 days of cultivation. The yields of monacolin K and yellow pigment were about 3 and 1.5 times higher than the basal medium, respectively, whereas citrinin was dramatically reduced by 36 times.

• 터널과지하공간
• /
• 제13권2호
• /
• pp.138-152
• /
• 2003

지하 수백미터 심부에 위치하는 고준위방사성 폐기물 처분장에서의 열-역학적 안정성 평가를 위해 FLAC3D를 이용한 3차원 해석이 수행되었다. 효과적인 해석을 위해 FISH프로그램이 작성되었으며 고성과 유성 의 시추부지에서 얻어진 지질, 암반 물성자료가 사용되었다. Factional factorial design을 적용한 실험설계를 거쳐 얻어진 응력, 온도에 대한 민감도 분석이 실시되었으며 이를 통해 처분장 안정성에 영향을 미치는 주요 설계 인자의 선정 및 인자 상호간의 영향을 분석할 수 있었다. 연구 결과 열-역학적 안정성에 가장 큰 영향을 미치는 인자는 처분공의 간격으로 나타났으며 처분터널의 간격과 완충재의 두께가 그 다음으로 주요한 인자인 것으로 나타났다.

• Journal of Ginseng Research
• /
• 제24권3호
• /
• pp.118-122
• /
• 2000

식물조직배양기술을 이용하석 인삼의 주요약리성분인 사포닌을 생산하고자, 식물생장조절물질로 유도된 인삼 root를 사용하여 사포닌 생산을 위한 최적액체배양조건을 RSM으로 조사하였다. 최적액체배양조건을 배지의 pH, sucrose 농도,nitrogen 농도, phosphate 농도의 3 level-4 factor의 fractional factorial design에 의하여 조사한 결과, 인삼 root의 사포닌 함량은 최저 0.174%에서 최고 0.303울까지 나타났다. 다중회귀분석으로 구한 model식을 가지고 등고분석과 3차원분석을 수행한 후 독립변수의 최저 또는 최고수준에서 종속변수가 최대치를 나타내지 않는 phosphate농도 변수에 대하여 model식을 편미분한 결과 인삼 roe떠 사포닌 함량이 최고치를 나타내는 액체배양조건은 pH 5.5, sucrose 5%, nitrogen 50 mg/L, phosphate 93 mg/L 예측되었다. 이렇게 결정된 조건값들을 model식에 대입하여 얻은 예상치는0.308%였다.

• Journal of Ginseng Research
• /
• 제24권2호
• /
• pp.58-63
• /
• 2000

식물조직배양기술을 이용하여 인삼 root를 생산하고자, 식물생장조절물질로 유도된 인삼 root를 사용하여 최적액체배양조건을 RSM을 이용하여 조사하였다. 최적액체배양조건을 배지의 pH, sucrose 농도, nitrogen 농도, phosphate 농도의 3 level-4factor의 fractional factorial design에 의하여 조사한 결과, 인삼 root의 생장율은 최저 1.00g에서 최고 2.33g까지 나타났다. 다중회기분석으로 구한 model식을 가지고 등고분석과 3차원분석을 수행한 후 독립변수의 최저 또는 최고수준에서 조속변수가 최대치를 나타내지 않는 배지의 pH와 sucrose농도의 변수에 대하여 model식을 편미분한 결과 인삼 root의 최적액체배양조건은 pH5.6, sucrose 3.8%, nitrogen 50mg/L, phosphate 80.7mg/L로 예측되었다. 이렇게 결정된최적조건값들을 model식에 대입하여 얻은 예상치는 2.36g 이었다.

• 분석과학
• /
• 제20권5호
• /
• pp.370-382
• /
• 2007

본 연구에서는 GC/FID를 이용한 SPME법을 적용하여 액상에서 대표적 디젤첨가제인 EGBE, DGBE, DBM, TGME의 미량 분석 가능성을 조사하였다. 또한, 요인배치설계법을 적용하여 EGBE, DGBE, DBM, TGME 미량분석의 최적조건을 도출하였다. 실험은 통계분석결과 뿐만 아니라 요인 수의 최적화에 따른 중심합성설계에 의한 완전요인 설계법을 사용하였으며, 반응표면분석은 추출 효율이 주 영향인염 농도, 흡착 온도, 흡착 시간과 sonication 시간에 따른 2차 다항식에 의해 설명될 수 있음을 보여주었다. 본 연구에서의 결과는 요인배치설계법을 사용하여 액상 시료에서 EGBE, DGBE, DBM, TGME의 정량분석을 개선하는 새로운 자료분석법을 보여주었다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.84-89
• /
• 2003

The finite element method (FEM) is typically used in the process of motor design. However, the FEM requires computation time, Therefore, decreasing the number of FEM simulations may also decrease the simulation cost. Several optimal design methods overcoming this problem have been recently studied. This paper investigates the optimal design of the magnet pole of a BLDC motor through reducing simulation cost. The optimization minimizes the magnet volume and limits the average and cogging torques to certain values. In this paper, the response surface methodology and Taguchi's table for reducing the number of FEM simulations are used to approximate two constraints. The optimization result shows that the presented strategy is satisfactorily performed.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.361-377
• /
• 1998

The measurement of welding temperature of connector is usually performed with an infra red temperature gauge. However, the factors, which influence the temperature measurement, are rarely known. This research used the welding temperature measurement of the connector as an example, applying the experimental design, in two-phase experiments, to search the affecting factors. In phase-I experiment, we used a resolution III, seven-factor fractional factorial design with two levels for each factor. The result showed that none of the factor was significant in affecting the welding temperature when the type I error ${\alpha}$ was 0.05. Next, we did the phase-II factorial experiment with three factors and each factor had three levels. The experiment showed the experimental time was significant in affecting the temperature measurement when the type I error ${\alpha}$ was 0.05. Further Duncan's multiple range tests on the second experimental data showed that the later the experimental time, the weaker the light intensity could have on the temperature measurement and the average of the highest temperatures was lower. Moreover, the later the experimental time, the smaller was the variance of the temperature measurement and the difference between the averages of the highest and the lowest temperatures was also lower.