• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.5-8
• /
• 1986

The simulation algorithm for all kinds of robots with arbitrary degrees of freedom which are combined with revolute joints or prismatic joints, or combinations was studied and implemented. This simulation package is composed of trajectory planning routine, control routine, kinematics routine using Newton-Raphson method, dynamics based on Newton-Euler method with four-bar linkage analysis, input routine and output routine.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.42-47
• /
• 2021

A one-touch descending lifeline that can easily be installed and rapidly evacuated in the event of a fire accident in high-rise buildings was proposed to overcome difficulties of conventional descending lifeline such as complex installation methods and procedures. However, this lifeline exhibits limitations such as restrictions in installation location and large apparatus size. Therefore, this paper proposes a sliding-type descending lifeline, which has a similar operation to that of current one-touch descending lifeline and solves the aforementioned limitations. A double square link mechanism including a sliding four-bar linkage is proposed and the descending lifeline support is redesigned to unfold in two different planes, allowing 3D movement. Additionally, the shape of the support frame is designed to obtain two attachment surfaces that can be attached to a wall, irrespective of the angle between the window and the inner wall. FEA analysis using ABAQUS is performed to ensure that the robustness of the presented support complies with the Fire Control Act Enforcement Decree. Finally, the feasibility of the proposed sliding one-touch descending lifeline is verified through fabrication.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.36-42
• /
• 2007

This paper presents mechanical design, fabrication and test of a biomimetic fish robot actuated by a unimorph piezoceramic actuator, LIPCA(Lightweight Piezo-Composite curved Actuator.) We have designed a linkage mechanism that can convert bending motion of the LIPCA into the caudal fin movement. This linkage system consists of a rack-pinion system and four-bar linkage. Four types of artificial caudal fins that resemble caudal fin shapes of ostraciiform subcarangiform, carangiform, and thunniform fish, respectively, are attached to the posterior part of the robotic fish. The swimming test under 300 $V_{pp}$ input with 0.6 Hz to 1.2 Hz frequency was conducted to investigate effect of tail beat frequency and shape of caudal fin on the swimming speed of the robotic fish. At the frequency of 0.9 Hz, the maximum swimming speeds of 1.632 cm/s, 1.776 cm/s, 1.612 cm/s and 1.51 cm/s were reached for fish robots with ostraciiform, subcarangiform carangiform and thunniform caudal fins, respectively. The Strouhal number, which means the ratio between unsteady force and inertia force, or a measure of thrust efficiency, was calculated in order to examine thrust performance of the present biomimetic fish robot. The calculated Strouhal numbers show that the present robotic fish does not fall into the performance range of a fast swimming robot.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.62-69
• /
• 2008

A specialized anthropomorphic robot hand which can be attached to the biped humanoid robot MAHRU-R in KIST, has been developed. This built-in type hand consists of three fingers and a thumb with total four DOF(Degrees of Freedom) where the finger mechanism is well designed for grasping typical objects stably in human's daily activities such as sphere and cylinder shaped objects. The restriction of possible motions and the limitation of grasping objects arising from the reduction of DOF can be overcome by reflecting a typical human finger's motion profile to the design procedure. As a result, the developed hand can imitate not only human hand's shape but also its motion in a compact and efficient manner. Also this novel robot hand can perform various human hand gestures naturally and grasp normal objects with both power and precision grasping capability.

• 문화기술의 융합
• /
• 제6권1호
• /
• pp.515-520
• /
• 2020

본 연구에서는 4절 평행 링크의 설계와 실제 구현에 대한 것으로 평행 4절 링크는 한축의 회전을 다른 축의 회전 운동으로 전달하기 위한 기본적인 기구학적 메카니즘으로 널리 이용되고 있다. 그런데 평행 4절 링크는 운동 도중에 전환점에서 위상 역전이 발생하는 문제가 발생하여 실제 구현에서는 이를 고려하여 설계하여야 한다. 링크 역전을 방지하기 위해서는 추가적인 위상 역전 억제용 링크를 옵셋을 두어 붙이는 2중 평행 사변형 형태의 링크를 제작하면 되는 것으로 일부 알려져 있으나 실제 제작하여 실험한 결과 전환점에서 운동이 부드럽지 않은 현상이 발생하였다. 본 연구에서는 이 문제를 해결하기 위해 위상 역전 방지를 위한 옵셋을 주는 링크외에 보조적으로 평활한 운동을 위한 링크를 추가시켜 피동축이 구동축을 따라 회전할 때에 특정지점에서 위상 역전이 발생하지 않고 평활한 운동을 수행하는 것을 확인 할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.766-771
• /
• 2004

In this paper, new exploration mobile robot is presented. This mobile robot, called Robhaz-6W, is able to overcome hazardous terrains, recognize three dimensional terrain information and generate a path toward the destination by itself. We develop the passive four bar linkage mechanism adoptable to such terrain without any active control and the real time stereo vision system for obstacle avoidance, a remote control and a path planning method. And the geometrical information is transmitted to the operator in the remote site via wireless LAN equipment. And finally, experimental results for the passive mechanism, the real time stereo vision system, the path planning are reported, which show the versatility of the proposed mobile robot system to carry out some tasks.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.537-545
• /
• 2010

This study presents a method to evaluate overturning safety and derailment safety of korean tilting train using kinematic analysis of four-bar linkage tilting mechanism. The safety is evaluated considering tilting vehicle body CG displacement. The design sensitivity for stable and safe maximum speed is evaluated around current korean tilting train design data. The current design shows minimum center of gravity displacement. Higher speed can be achieved with larger center of gravity displacement.

• Journal of Biosystems Engineering
• /
• 제7권2호
• /
• pp.8-17
• /
• 1983

특수(特殊)한 기능(機能)을 수행(遂行)하기 위한 4링크 기구(機構)의 설계(設計)에서는 링크의 연간궤적(連稈軌跡)이 중요(重要)한 설계조건(設計條件)이 된다. 이앙기(移秧機)의 이식기구(移植機構)나 바인던의 방출(放出)암은 모두 4링크 기구(機構)를 이용(利用)하여 작업수행(作業遂行)에 필요(必要)한 연간궤적(連稈軌跡)을 얻고 있는 것이다. 필요(必要)한 연간궤적(連稈軌跡)을 얻기위한 4링크 기구(機構)의 합성(合成)은 도해적(圖解的), 해석적(解析的) 방법(方法)을 통(通)하여 많은 연구(硏究)가 이루어져 왔으며 최근(最近)에는 콤퓨터를 이용(利用)한 기구합성(機構合成)에 대(對)한 연구(硏究)가 활발하게 이루어지고 있다. 본(本) 연구(硏究)에서는 연간궤적상(連稈軌跡上)의 점(點)들을 이용(利用)하여 주어진 연간궤적(連稈軌跡)을 얻기 위한 4링크 기구(機構)의 합성(合成)에 대(對)한 새로운 방법(方法)을 개발(開發)하고 이 방법(方法)을 콤퓨터 프로그래밍하여 주어진 연간궤적(連稈軌跡)과 콤퓨터로 합성(合成)한 4링크 기구(機構)의 연간궤적(連稈軌跡)을 비교(比較)검토 하였다.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.563-570
• /
• 2009

In the future, most military activities will be replaced by robots. Because of many dangerous factors in battlefield, reconnaissance should be performed by robot. Reconnaissance robot should be small for not being detected, be light and simple structure for personal portability and overcome unexpected rough terrain for mission completion. In case of small and light robot, it can't get enough friction force for movement. Therefore small reconnaissance robot need jumping function for movement. In this paper we proposed a biologically inspired jumping mechanism. And we adjusted moment and jumping angle by using four bar linkage, especially varying coupler length.

• 로봇학회논문지
• /
• 제11권4호
• /
• pp.242-247
• /
• 2016

A robot manipulator handling a heavy weight requires high-capacity motors and speed reducers, which increases the cost of a robot and the risk of injury when a human worker is in collaboration with a robot. To cope with this problem, we propose a collaborative manipulator equipped with a counterbalance mechanism which compensates mechanically for a gravitational torque due to the robot mass. The prototype of the manipulator was designed on the basis of a four-bar linkage structure which contains active and passive pitch joints. Experimental performance evaluation shows that the proposed robot works effectively as a collaborative robot.