• 전기학회논문지
• /
• 제59권2호
• /
• pp.338-343
• /
• 2010

Low cost motor drives are being sought for high volume energy efficient home appliances. Key to the realization of such low cost motor drives is to reduce the power electronic converter in terms of its components, particularly the active devices, finding the motor with least complexity for manufacturing and a controller that could extract the desired performance from the machine and converter combination. These and other factors such as self-starting, speed control over a wide range and most of all the crowning aspect of a four quadrant operation with bare minimum number of controllable switch (or switches) remain as formidable challenges for low cost motor drive realization. In this paper, a four quadrant switched reluctance motor (SRM) drive with only one controllable switch is realized by using a two-phase machine. The theory and operation of the proposed four-quadrant SRM drive with the proposed control algorithm for its realization are described. The motor drive is modeled, simulated and analyzed to verify its feasibility for self-starting, speed control and for four quadrant operation and the simulation results are presented. Experimental results confirm the validity of the proposed control algorithm for four quadrant control of the SRM drive. The focus of the paper is mainly directed toward the control algorithm for realizing the four-quadrant operation of the two-phase SRM drive with a single controllable switch converter.

• 대한전기학회논문지
• /
• 제39권4호
• /
• pp.349-356
• /
• 1990

In order to control DC motors for electric cars by chopper system, four quadrant operations - forward powering, forward regenerative braking, reverse powering, reverse regenerative braking - are needed. For the four quadrant operations, the separately - excited DC motors are used in this study. The conversion of each quadrant operation has been obtained by 1) adopting the two phase chopper system with combined output for the armature control, and 2) the single phase chopper system for the field control.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.244-247
• /
• 1999

In this paper, a low voltage CMOS analog four-quadrant multiplier is presented. The proposed multiplier is composed of a pair of transconductor and lowers supply voltage down to $V_{T}$+2 $V_{Ds,sat}$+ $V_{DS,triode}$. The designed analog four-quadrant multiplier have simulated by HSPICE using 0.25${\mu}{\textrm}{m}$ n-well CMOS process with a 1.2V supply voltage. Simulation results show that the THD can be 1.28% at maximum differential input of 0.7 $V_{p-p}$././.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.1-10
• /
• 2001

비 압축성 점성 유동에 대한 RANS 방정식의 수치 해법을 사용해서 4상한(four quadrant) 조건에서 작동하는 박용 프로펠러 주위의 난류 유동과 프로펠러 단독 성능을 계산하였다. 4상한 조건의 단독 성능에 대한 실험결과가 존재하는 모형 프로펠러 P4381에 대하여 계산된 유동은 다양한 조건에서 프로펠러에 발생하는 3차원 유동박리를 포함한 복잡한 점성유동 특성을 잘 보여주었으며, 계산된 프로펠러 추력과 토크는 실험에서 캐비테이션이 심하게 발생된 일부 경우를 제외하고는 실험 결과와 잘 일치하였다.

• Journal of Power Electronics
• /
• 제14권6호
• /
• pp.1243-1253
• /
• 2014

The phase inductance of a switch reluctance motor (SRM) is significantly nonlinear. With different saturation conditions, the phase inductance shape is clearly changed. This study focuses on the relationship between coefficient and current in an inductance model with ignored harmonics above the order of 3. A position estimation method based on the variable coefficient inductance model is proposed in this paper. A four-quadrant sensorless control system of the SRM drive is constructed based on the relationship between variable coefficient inductance and rotor position. The proposed algorithms are implemented in an experimental SRM test setup. Experimental results show that the proposed method estimates position accurately in operating two/four-quadrants. The entire system also has good static and dynamic performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.473-475
• /
• 1996

In this paper, bilateral variable-ratio dc chopper system for electric vehicle is proposed. We present the method which is able to simplify the main synthetic chopper circuit by selecting among the forward powering, forward regenerative braking, backward powering, and backward regenerative braking only by control signal. By conducting the experiment with separately excited dc motor, it is confirmed that two quadrant chopper can drive four quadrant operation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.205-208
• /
• 2000

In this paper, a low voltage CMOS analog four-quadrant multiplier using two V-I converters is presented. The proposed V-I converter is composed of the series composite transistor and the low voltage composite transistor. The designed analog four-quadrant multiplier has simulated by HSPICE using 0.25$\mu\textrm{m}$ n-well CMOS process parameters with a 2V supply voltage. Simulation results show that the power dissipation is 1.55㎿, the cutoff frequency is 489MHz, and the THD can be 0.26％ at maximum differential input of 1V$\sub$p-p/.

• 한국음향학회지
• /
• 제19권1호
• /
• pp.84-88
• /
• 2000

본 논문에서는 저전압에서 동작하는 CMOS 아날로그 4상한 멀티플라이어를 설계하였다. 제안된 멀티플라이어는 2개의 완전 차동 트랜스컨덕터로 구성되고 공급 전압을 VT+2VDS,sat+VDS,triode로 낮게 유지할 수 있다. 설계된 아날로그 4상한 멀티플라이어는 1.2V 공급전압에서 0.25㎛ CMOS n-well 공정 파라미터를 이용하여 HSPICE 시뮬레이션 하였다. 시뮬레이션 결과 0.7VP-P 최대 입력에서 THD는 1.28%이다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.572-579
• /
• 2014

As a non-linear time variant system, the four-quadrant line converter of an electric multiple unit (EMU) was expressed by linear time periodic functions near an operating point and modeled by a steady-state harmonic domain matrix. The components were then combined according to the circuit connection and relations of the feedback control loops to form a complete converter model. The proposed modeling method allows the study of the amplitude of harmonic impedances to explore harmonic coupling. Moreover, the proposed method helps provide a better design for the converter controllers, as well as solves the problem in coordination operation between the EMUs and the AC supply. On-site data from an actual $CRH_2$ high-speed train were used to validate the modeling principles presented in the paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.31-34
• /
• 2003

There are several types of switching table for selection voltage vector in direct torque control of induction motor. In general, two-quadrant and four-quadrant operation switching table are used mostly. Two-quadrant operation has an advantage that reduced the torque ripples in comparison with four-quadrant operation, but it has the defect that is not constant average torque. Because the torque increasing slope size by non-zero voltage vector is different from the torque decreasing slope size by zero voltage vector as speed region. The main objective of this study is to maintain constant average torque using two-quadrant operation switching table. In proposed method, the torque increasing slope or decreasing slope are calculated before selected voltage vector is applied. Then, it is applied to zero voltage vector or non-zero voltage vector until the torque increasing slope and decreasing slope are equal. In total magnitude. Therefore it becomes to maintain average torque at whole operation speed. The validity of the proposed method is proven by simulated and experimental results.