• Journal of Hydrogen and New Energy
• /
• v.33 no.4
• /
• pp.267-283
• /
• 2022

In these day, the environmental issues of climate change have been continuously highlighted and there is an active discussion on the transition from fossil fuel-based energy to eco-friendly energy use. This study considered psychological attitudes as a major influencing factors for successful implementation of a hydrogen society totally based on the use of hydrogen energy, which is regarded as an alternative energy for future. Accordingly, familiarity, risk perception, and acceptability of psychological factors were investigated. In addition, this study identified whether there are differences in psychological factors according to the general characteristics of gender, age, occupation, and housing type. The results showed that awareness of hydrogen cars and fuels is below the average level, and we also have obtained the implication that social knowledge sharing should precede the implementation of hydrogen policy. Although we found that the degree of urban acceptance of hydrogen energy was high, it was also confirmed that the charging infrastructure was generally perceived as having a high risk. Our findings implicate that it is necessary to figure out policy strategies for suitable locating charging infrastructure in order to promote the use of hydrogen energy more.

• Current Photovoltaic Research
• /
• v.11 no.3
• /
• pp.79-86
• /
• 2023

As we strive to mitigate the environmental impact caused by the use of fossil fuels, the exploration of alternative energy sources has gained significant attention. Solar energy, in particular, has emerged as a promising solution due to its eco-friendly nature and virtually limitless availability. Among the various types of solar cells that harness this abundant energy source, organic solar cells have garnered considerable interest. Organic solar cells feature a photo-active layer composed of organic semiconductors, offering a range of appealing advantages such as cost-effectiveness, flexibility, translucency, and the ability to produce customizable colors. However, the commercialization of organic solar cells has been impeded by certain challenges, notably their relatively low efficiency and stability. To overcome these obstacles and pave the way for wider adoption, researchers have been exploring innovative approaches, including the implementation of ternary blend organic solar cells. This strategy involves introducing a third component into the photo-active layer alongside the organic semiconductors, with the aim of enhancing the overall performance of the solar cell. In this paper, we delve into the issues associated with organic solar cells and focus on one potential solution: ternary blend organic solar cells. Specifically, we examine the application of this approach to PM6:Y6, which stands as one of the most popular combinations of organic semiconductors. By investigating the potential of ternary blends, particularly utilizing PM6:Y6, we aim to accelerate the commercialization of organic solar cells.

• Advances in Computational Design
• /
• v.7 no.4
• /
• pp.321-343
• /
• 2022

Museum buildings display artefacts for public education and enjoyment, ensuring their long-term safety and the comfort of visitors by following strict indoor environment control protocols using mechanical Heating, Ventilation and Air Conditioning (HVAC) systems to keep the (environmental) variables at a fixed comfort level. Maintaining this requires constant supply of energy currently mostly sourced from the combustion of fossil fuels which exacerbates climate change. However, a review on the effects of the indoor environmental variables on museum artefacts as well as museum visitors revealed that there is no specific point at which artefact deterioration occurs, and that there are wide ranges of conditions that guarantee the long-term safety of artefacts and human comfort. Visits to museum buildings in hot-humid tropical climate of Nigeria revealed that strict indoor environmental practices were adopted. Even when appropriate micro-climatic conditions are provided for artefacts, mechanical HVAC systems remain necessary for visitor comfort because almost no consideration is given to natural ventilation. With the current global push towards energy management, this paper reviewed passive environmental control practices, architectural design strategies, and discusses the adaptation of double skin façade with jali screens, and the notion of smart materials, which can satisfy the range of requirements for the long-term safety of artefacts and levels of human comfort in buildings in hot-humid tropical climate, without mechanical HVAC systems. This review would inspire more discussions on passive, energy efficient, smart and climate responsible popular architecture, challenging current thinking on the impact of the more accepted representative architecture.

• Clean Technology
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2010

The feasibility of clean technology to minimize the $CO_2$ emission by recycling and reuse the waste materials and energy have been studied for the cement industry. A life cycle assessment (LCA) was performed for an alternative raw material-supply method to use the molted slag as the major raw material in the cement clinker manufacturing. Using this new method, a 60% of $CO_2$ could be reduced that comes out during the decarboxylation from the cement rotary kiln. The energy-efficiency improvement and the alternative energy methods that had been determined in our previous study through the environmental assessment of cement industry were applied to the study for the reduction of $CO_2$ emission. The natural gas, one of the fossil fuels, was also used as the first choice to get the result at the earliest time by the most economic and the most efficient green technology and to switch into the carbon neutral energy consumption pattern.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.845-855
• /
• 2022

In response to climate change, the world is continuing efforts to reduce fossil fuels, expand renewable energy, and improve energy efficiency with the goal of achieving carbon neutrality. In particular, R&D is being made on the value chain covering the entire cycle of hydrogen production, storage, transportation, and utilization in order to shift the energy supply system to focus on hydrogen energy. Hydrogen-based energy sources can produce heat and electricity at the same time, so it is possible to utilize heat energy, which can increase overall efficiency. In this study, calculation of the optimal scale for hydrogen-based cogeneration and the composition of heat sources were reviewed. It refers to a method of the optimal heat source size according to the external heat supply and heat storage to be considered. The results of this study can be used as basic data for establishing a hydrogen-based energy supply model in the future.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.13-22
• /
• 2023

As an alternative to environmental pollution generated from fossil fuels currently in use, research is being actively conducted to use hydrogen that does not cause air pollution. As fire and explosion accidents caused by hydrogen leakage have occurred until recently, research on safety is needed to commercialize hydrogen on ships, which are special environments. In this study, a seasonal alternative scenario for each season and the worst scenario were assumed in the event of a leakage accident while a hydrogen fuel cell propulsion ship equipped with a hydrogen storage tank was navigating at JangSaengPo port in Ulsan. In order to consider environmental variables, the damage impact range was derived through ALOHA and probit analysis based on the annual average weather data for 2021 by the Korea Meteorological Administration and on geographic information data from the National Statistical Office. Radiation showed a wider damage range than that of Overpressure and Flame in both the alternative and worst-case scenarios, and as a result of probit analysis, a fatality rate of 99% was confirmed in all areas.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.3
• /
• pp.1-10
• /
• 1986

Nowadays, air pollution by increasing consumption of fossil fuels resulting from rapidly growing population and industrialization has caused the adverse effects on terrestrial ecosystems and become one of the most serious problems causing environmental discriptions. Air pollution such as $SO_2, HF, NO_X,$ fly ash, ozone and PAN might influence plant growth, reproduction, nutrient cycling, photosynthesis and predisposition to entomological and pathological stresses on plants. Furthermore, accumulation of those toxic substances in forests might cause subtle or serious changes in the structure and function of forest ecosystems. Since 1970s, a number of large industrial complexes had been constructed as a part of industrialization plan in Korea. Accordingly, the forest exosystems around them has been under chronic influences of air pollution and effects of air pollution on plants became a matter of concern. In Yocheon Industrial Complex which consisted of lots of petrochemical plants and a phosphatic fertilizer manufacturing plant, forests has been exposed to chronic air pollution, mainly HF and $SO_2$ gas, Various reports were available to investigate the potential effects of air pollution on crops and forest trees in Yocheon. Kim and Kim surveyed vegetation by naked eye method and reported 71 families, 150 genera and 158 species were growing within a 2 km from air pollution sources in 1981. Needle injuries on Pinus spp. in the polluted area water reported by Kim, et al. and Kim, et al. Kim, et al. investigated the primary production of Pinus thunbergii forests in the polluted area and verified that growth inhibition of Pinus thunbergii was attributable to air pollution. Thus, previous reports suggested that forest ecosystems around Yocheon Industrial Complex were influenced adversely by air pollution. The objective of this study was to investigate the subtle ecological changes in forest community exposed to chronic air pollution in Yocheon.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.118-125
• /
• 2019

Climate change is one part of 17 Sustainable Development Goals (SDGs). According to the Fifth Assessment Report by the Inter- governmental Panel on Climate Change(IPCC) published in 2014, global warming is caused by greenhouse gas (GHG) emissions. The most important GHG is carbon dioxide (CO₂), which is released by the burning of fossil fuels and, to a lesser extent, by land use practices, followed by nitrous oxide and methane. IPCC predicts that global temperatures will rise 3.7℃ and sea level will rise 0.63 m by 2099 in the case of no strong restraint. According to the report, we can expect a massive species extinctions, changes in storm and drought cycles, altered ocean circulation, and redistribution of vegetation by global warming. However, climate changes, especially global warming, are the largest potential threat to human health and the source of a number of diseases globally. If climate changes are continued uncontrolled, human health will be adversely affected by the accelerating climate change and the natural disaster induced by climate change. It means we will face more serious conditions of injury, disease, and death related to natural disasters such as flood, drought, heat waves, malnutrition, more allergy, air pollution and climate change related infections related to morbidity and mortality. This review emphasizes on the relationship between global climate changes and human health and provides some suggestions for improvement.

• Corrosion Science and Technology
• /
• v.22 no.3
• /
• pp.187-192
• /
• 2023

The use of biomass is increasing as a response to the convention on climate change. In Korea, a method applied to replace fossil fuels is using wood chips in a cogeneration plant. To remove air pollutants generated by burning wood chips, a selective denitrification facility (Selective catalytic reduction, SCR) is installed downstream. However, problems such as ash deposition and descaling of the equipment surface have been reported. The cause is thought to be unreacted ammonia slip caused by ammonia ions injected into the reducing agent and metal corrosion caused by an acidic environment. Element analysis confirmed that ash contained alkali metals and sulfur that could cause catalyst poisoning, leading to an increase in the size of ash particle and deposition. Measurement of the size of ash deposited inside the facility confirmed that the size of ash deposited on the catalyst was approximately three times larger than the size of generally formed ash. Therefore, it was concluded that a reduction in pore area of the catalyst by ash deposition on the surface of the catalyst could lead to a problem of increasing differential pressure in a denitrification facility.

• Journal of Hydrogen and New Energy
• /
• v.33 no.2
• /
• pp.148-157
• /
• 2022

Research on hydrogen storage is active to properly deal with hydrogen, which is considered a next-generation energy medium. In particular, research on metal hydride with excellent safety and energy efficiency has attracted attention, and among them, magnesium-based hydrogen storage alloys have been studied for a long time due to their high storage density, low cost, and abundance. However, Mg-based alloys require high temperature conditions due to strong binding enthalpy, and have many difficulties due to slow hydrogenation kinetics and reduction in hydrogen storage capacity due to oxidation, and various strategies have been proposed for this. This research manufactured Mg₂Ni to improve hydrogenation kinetics and synthesize about 5, 10, 20 wt% of CaF₂ as a catalyst for controlling oxidation. Mg₂NiHx-CaF₂ produced by hydrogen induced mechanical alloying analyzed hydrogenation kinetics through an automatic PCT measurement system under conditions of 423 K, 523 K, and 623 K. In addition, material life cycle assessment was conducted through Gabi software and CML 2001 and Eco-Indicator 99' methodology, and the environmental impact characteristics of the manufacturing process of the composites were analyzed. In conclusion, it was found that the effects of resource depletion (ARD) and fossil fuels had a higher burden than other impact categories.