• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.653-661
• /
• 2016

This paper proposes a capacitance estimation method of the dc-link capacitor for brushless DC motor (BLDCM) drive systems. In order to estimate the dc-link capacitance, the BLDCM is operated in quadrant-II or -IV among four-quadrant operation. Quadrant-II and -IV are called reverse braking and forward braking, respectively. During the braking operation of the BLDCM, the capacitor is charged by the phase current and then the voltage is increased during the braking operation time. The capacitor current and voltage can be obtained by using the phase current sensor of BLDCM and the dc-link voltage sensor. The capacitance and be easily obtained by the voltage equation of the capacitor. The proposed method guarantees the reliable and simple calculation of the dc-link capacitance without additional hardware system except several the sensors already installed for the motor control system. The effectiveness of the proposed method is verified through both the simulation and experimental results.

• 한국정밀공학회지
• /
• 제6권3호
• /
• pp.32-45
• /
• 1989

The positioning accuracy of robots depends upon a forward kinematics which relates the joint variables to the orientation and position of the robot extremity in the absolute coordinate system. The relationship between two connective joint coordi- nates of a robot, which is the basis of the kinematics, is defined by 4 Denavit-Hartenberg parameters. But manufacturing errors in machining and assembly process of robots lead to disctrepancies between the design parameters and the physical structure. Thus, improving the positioning accuracy of robots reguires the identification of the actual link parameters of each robot. In this study, the least-squares method is used to calibrate the link parameters and off-line parameter calibration software is developed. Computer simulation is done to study the dependence of the calibration performance upon the DOF of the robot and number of acquired data set used in the least-squares method. 3 DOF Robot/Controller and specially designed 3D coordinate measurer is made and experiment is carried out to verify the theoretical and computational analysis.

• Journal of Information Processing Systems
• /
• 제15권1호
• /
• pp.100-115
• /
• 2019

Malicious code distribution on the Internet is one of the most critical Internet-based threats and distribution technology has evolved to bypass detection systems. As a new defense against the detection bypass technology of malicious attackers, this study proposes the automated tracing of malicious websites in a malware distribution network (MDN). The proposed technology extracts automated links and classifies websites into malicious and normal websites based on link structure. Even if attackers use a new distribution technology, website classification is possible as long as the connections are established through automated links. The use of a real web-browser and proxy server enables an adequate response to attackers' perception of analysis environments and evasion technology and prevents analysis environments from being infected by malicious code. The validity and accuracy of the proposed method for classification are verified using 20,000 links, 10,000 each from normal and malicious websites.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.43-51
• /
• 2013

본 논문은 초고속 비행체에 탑재하여 대용량 자료를 송수신하는 원격측정링크 개발에 대하여 기술하였다. 고속 이동체 환경에서 고속 자료전송을 위해 기존에 주로 사용되던 PCM/FM 변조방식에 비해 대역폭 효율성, 주파수 선택적 페이딩, 도플러 주파수 옵셋 등을 고려하여 DQPSK 변조방식을 사용하였다. 또한 통신채널 장애의 주요 원인이 되는 멀티패스 간섭을 최소화하기 위해 다수의 수신안테나를 사용하여 공간다이버시티를 구현하였으며 추가적으로 터보코드를 오류정정부호로 사용하여 양질의 데이터를 수신할 수 있도록 개발하였으며 비행시험을 통하여 성능을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.638-648
• /
• 2013

Together with the GPS-based approach, geo-location through mobile communication networks is a key technology for location-based service. To save the cost, most geo-location system is implemented on the existed network service, which has a cellular structure. Still, multilateration is limited in cellular structure because it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. This low hearability in the receiver is caused by co-channel interference and multipath environment. Therefore, hearability enhancement is necessary for multilateration under multipath and interference environment. Former time domain based hearability methods were designed for real signals. However, orthogonal frequency division multiplexing (OFDM) signal, which its usage has been increased in digital wireless communication, is a complex signal. Thus, different hearability enhancement method is needed for OFDM signals. This paper proposes a hearability enhancement method for forward-link multilateration using OFDM signals, which employ interference cancellation and multipath mitigation. A novel interference cancellation and multipath mitigation strategy for complex-valued OFDM signals is presented that has an iterative structure. Simulation results show that the proposed multilateration method provides the user's position with an accuracy of less than 80m through the mobile WiMAX cellular network in multipath environment.

• 한국통신학회논문지
• /
• 제30권7C호
• /
• pp.666-674
• /
• 2005

이동국에서 받은 되먹임 정보를 바탕으로 하는 차단 적응 전송 기법을 쓸 때, 여러 반송파 부호분할 다중접속/주파수분할 다중방식의(multi carrier code division multiple access/frequency division multiplexing: MC CDMA/FDM 내림 연결 성능을 알아본다. 셀이 하나일 때 직교 서명수열을 쓰면, 제안한 기법은 여러 반송파 직접 수연 부호분할 다중접속(direct sequence/code division multiple access: MC DS/CDMA) 방식과 적응 주파수 뜀/직접 수열(frequency hopping/direct sequence: FH/DS) 방식보다 성능이 더 좋다. 셀이 여럿일 때에도 직교 서명수열이나 확률 서명수열을 쓰면, 제안한 기법이 적응 주파수 뜀/직접 수열 방식보다 성능이 더 좋다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.282-289
• /
• 2010

A simplified, practical vector network analyzer (VNA) that uses mature radio-over-fiber technology has been designed and demonstrated. The measurement concept allows the full S-parameters of a microwave device (or antenna) to be obtained while minimizing the detrimental effects of electrical cables, which are replaced with a photonic link. A variety of high-frequency light modulation schemes with frequency sweeping capabilities are presented to realize a one-path (single, forward), frequency-multiplied optical link for VNA applications. Using the photonic one-path link, full two-port S-parameters have been extracted based on five-term error modeling, which has half the error terms compared with the standard duplex configuration. The S-parameters of a microwave filter and antenna measured using frequency-multiplied optical links are found to be in good agreement with those obtained using a conventional VNA.

• 대한전자공학회논문지TC
• /
• 제44권4호
• /
• pp.80-87
• /
• 2007

본고 에서는 802.16, 802.20 및 3G-LTE, WiMax, 그리고, WiBro와 같은 차세대 이동통신 시스템의 규격으로 고려되고 있는 직교 주파수 분할 다중 접속 방식 (orthogonal frequency division multiple access; OFDMA)의 물리 계층 성능을 검증한다. 대부분의 연구 결과가 순방향 성능 향상에 집중되어 있기에 상대적으로 미약한 역방향을 고려하며, 많은 연구 결과가 부호화를 고려하지 않은 것에 비해 본 연구에서는 LDPC (low-density parity check) 부호화를 고려한다. 역방향의 경우 다양한 사용자간의 시간 동기 오차, 그리고, FFT (fast Fourier transform) 시 주파수 동기 오차가 존재하므로, 이를 고려한 성능 열화를 살펴본다. 다양한 성능 열화 요인을 갖는 역방향 링크의 성능 향상을 위하여, 송수신 안테나 다이버시티에 의한 성능 향상을 살펴본다. 또한, 동일한 성능 열화 요인 하에서 코드 분할 다중 접속 방식 (code division multiple access; CDMA)과의 프레임 오율 (frame error rate; FER) 및 throughput 비교를 통해 역방향 OFDMA 시스템의 장점을 부각하며, 최종적으로 다양한 부호화율 및 안테나 조합을 고려한 역방향 OFDMA시스템의 최대 throughput 달성을 위한 요구 Eb/No를 제안한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.198-202
• /
• 2001

This paper presents a novel prototype version of ZCS-PWM forward DC-DC power converter using power MOSFETs which is designed for application specific low voltage large current conversion operation. The soft-switching forward power converter with a high frequency isolated transformer link which can efficiency operate over wide load ranges under two conditions of ZCS as well as active voltage clamped switching is evaluated and discussed on the basis of the simulation and experimental results.

• Journal of information and communication convergence engineering
• /
• 제15권1호
• /
• pp.21-27
• /
• 2017

In this research, we study the outage probability for distributed space-time coding-based cooperative (DSTC) systems with amplify-and-forward relaying over Rayleigh fading channels with a high temporal correlation where the direct link between the source and the destination is available. In particular, we derive the upper and lower bounds of the outage probability as well as their corresponding asymptotic expressions. In addition, using only the average channel powers for the source-to-relay and relay-to-destination links, we propose an efficient power allocation scheme between the source and the relay to minimize the asymptotic upper bound of the outage probability. Through a numerical investigation, we verify the analytical expressions as well as the effectiveness of the proposed efficient power allocation. The numerical results show that the lower and upper bounds tightly correspond to the exact outage probability, and the proposed efficient power allocation scheme provides an outage probability similar to that of the optimal power allocation scheme that minimizes the exact outage probability.