• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.435-442
• /
• 2000

In this paper, we analyzed RF-DC conversion efficiency for the dual -polarization rectenna and the antenna position changing. Dual-Polarization rectenna consist of a two major parts, receiving antenna and rectifying circuits. We made dual-polarization 2.45GHz rectenna using the two dipole antennas and patch antenna. Rectifying circuit is consisted by a Schottky-Barrier diode with a large forward current and reverse breakdown voltage. The results of RF-DC conversion efficiency for the each of designed dual-polarization rectenna has 69.1% with 360$\Omega$(dipole type) and 75.4% with 340$\Omega$(patch type ) optimum load resistor. When the each of dual-polarization rectenna has optimal load resistor, it's conversion efficiency shows of $\pm$20% in dipole type and $\pm$5 in patch type at 0~180。position.

• Journal of the Korean Society of Costume
• /
• v.34
• /
• pp.19-36
• /
• 1997

through Sid View Silhouette The purpose of this study was to pro-vide basic information for elderly women's clothing construction and to develop dress forms that can reflect the charac-teristics of their bodies. The subjects were 251 elderly women aged from 60 to 81. Data were collected from 34 photographic measurements of each subject and analyzed by factor analysis cluster analysis analysis of variance. The results were as follows: 1. A decrease in height the bustline drops as age increase. From a lateral view point most of the subjects have straight posture with protruding ab-domens but the somatotype gradually bends bends forward with age. 2) Five factors were extracted from photometric measurement which explain 81.0% of variance. 3 Through cluster analysis using 5 fac-tor scores four types were categorized. Type I was turning over somatotype Type II was swayback somatotype Type III was straight somatotype Type IV was bending somatotype according to its po-sition to the relative plumb liner and their side view contour.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.713-720
• /
• 2008

The purpose of this study was to propose the method reproducing three dimensional figure data to a reconstructed body by the styrofoam board. To make the reconstructed body, the 3D figure data were rotated to make symmetry and the surfaces were edited. The horizontal curves were gathered equally-spaced based on the waist horizontal plane. we proposed the process to cut the styrofoam board according to the horizontal curves, to assemble them to organize the shape of the body figure and to coat the surface with the knitted. The 3-dimensional figure data of straight type, swayback type, lean-back type and bend-forward type were selected and the reconstructed bodies were made as above. And the compatibility was verified by the measurement comparison and deviations between 3-dimensional figure data and reconstructed body.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.488-499
• /
• 1996

A propeller type mistblower was designed and manufactured. The machine consisted of a 770 millimeters diameter propeller driven by the power take off of a tractor. It delivered 26,400 cubic meters of air per hour and has the outlet speed about 180 kilometers per hour. Spray liquid was injected at 30 bars pressure through hollow cone type nozzles which were located around the air outlet of the machine bya poston type pump. Power consumption of the machine was found to be 12.46 kilowatts and the effective forward travel speed was about 2.7 kilometers per hour. Upon spraying mango trees, it was shown that the density of spray partices was about 100 microns and consumed 3.12 liters per tree. Working speed in 6 meters row spacing mango orchard was about one hectare per hour.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.289-294
• /
• 2001

The two prototypes of a Wheel Type Locomotive Mechanism Using Micro motor for a Capsule-Type Endoscope are outlined and realized. Basic concept of these mechanisms is to use a rod-shaped wheel, with which these mechanisms can go over the haustral folds inside colon. The actuator of Prototype I is geared dc motor and the actuator for steering is Shape Memory Alloy. Prototype I goes through the whole area of colonoscopy training model. Prototype II can not only go forward and backward, but also be steerable with 2 geared dc motors. Prototype II goes through dead pig colon.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.49-58
• /
• 2019

Automatic transmissions are standard equipment in most automotive vehicles because they provide smooth speed shifting and a compact design with multiple speed ratios. Their structure consists mainly of planetary gear sets as power-transmitting devices and brakes and clutches as shifting devices. Several forward and one reverse speed ratios are achieved by actuating shifting devices to connect gears, input and output shafts, and the transmission case. In the development of a new transmission, kinematic configurations reflecting the transmission concept design are required, and the ability of the new concept design to be assembled without any interference among the connections must be demonstrated. In this study, an assemblability analysis of the kinematic configurations of a Ravigneaux-type automatic transmission was conducted with an assemblable example of an 8-speed Ravigneaux-type automatic transmission.

• Journal of Biosystems Engineering
• /
• v.15 no.2
• /
• pp.88-98
• /
• 1990

The purpose of this study was twofold : first, to reduce as much as possible the shaking moments of the crank-type transplanting mechanism of walking-type rice transplanters, and second, to evaluate whether or not a crank-type transplanting mechanism, if its shaking moment is reduced, can be used in riding-type transplanters for high speed transplanting operations. For these purposes, kinematic and force analyses of the currently available crank-type transplanting mechanisms were made and their results were compared with those observed by experimentation. The degree of shaking moment effect was also estimated Various efforts to minimize the shaking moments led to the development of a crank-type mechanism with a balancing gear, in which an eccentric balancing gear is combined into the driven link axis. Analysis of the developed mechanism showed that about 20% of the shaking energy can be reduced and about 40% of reduction in peak shaking moment can be obtained when comparing with those obtained without the balancing gear. It was concluded that crank-type transplanting mechanisms can be used for high speed operations with a forward speed of 0.9-1.2m/s if the balancing gear is additionally mounted. However, further considerations must be made to solve the space constraints in relation to the structural frame of riding type of rice transplanters.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.5
• /
• pp.345-349
• /
• 2005

Objective: Anterior screw fixation provides the best anatomical and functional results for type II odontoid process fracture (type II-A, II-N, and II-P) with intact transverse ligament. The purpose of this study is to evaluate the usefulness of the 4.5mm diameter, cannulated Herbert screw in anterior screw fixation. Methods: From Jan. 2003 to Feb. 2004, consecutive 10cases of type II odontoid process fractures were treated with anterior screw fixation using a Herbert screw. The Herbert screw has double threads, with different pitches on the distal and proximal ends. It has no head, so it can be inserted through articular cartilage and buried below bone surface. It was originally developed for treating scaphoid fractures. Results: There were 8male and 2female patients whose ages ranged from 15 to 67years (mean 42.1years). The fracture type was type II-A in 4patients, II-N in 3 patients, and II-P in 3 patients. The fracture line was oblique downward and backward in 6cases, oblique downward and forward in 1 case, and horizontal in 3cases. The range of follow-up was 5 to 18months (mean 12months). Bone fusions were achieved in all cases without any instrumental failures or postoperative complications. Conclusion: The Herbert screw is very useful in anterior fixation for type II odontoid process fracture. This series showed successful results also in type II-A odontoid fracture when treated with the Herbert screw, but further more studies are required.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.54-58
• /
• 2019

Purpose At now, there are many kind of dedicated heart SPECT machine in clinical nuclear medicine. Among those, the fixed focusing type SPECT can make a good quality, quantity image because a detectors of this SPECT arranged forward a special ROI and didn't rotate around of body. So, in this paper, we will evaluate a spatial uniformity about resolution and sensitivity at a same plane of a fixed focusing type SPECT. Materials and Methods We used D-SPECT as a fixed focusing type SPECT and Cario MD as a rotated parallel type SPECT to comparing each other. We injected $^{99m}Tc(14.8MBq/1cc)$ to 10 capillary tube (diameter=1mm), and we set those line sources a tfield of view of each SPECT. And then we acquired SPECT date, we applied are construction by recommended methods. By using two tomography images, we calculated a full width of half maximum as a resolution and total counts as a sensitivity, and we compared a CV (coefficientofvariation) values between two images as a spatial uniformity. Results In case of D-SPECT, a CV of resolution and sensitivity are 7.45%, 12.34%. In case of Cario MD, an CV of resolution and sensitivity are 12.49%, 21.84% Conclusion As a results, CV of resolution and sensitivity of a fixed focusing type SPECT is 67.75%, 77.00% higher than ones of a rotated parallel type SPECT. It means that a fixed focusing type SPECT is more uniformed, because this new SPECT can reduce a motion blur artifact by rotating detector around body, also all of detector that made by semiconductor arrange forward a special FOV like heart.

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.512-522
• /
• 2015

The aim of this study was to investigate the change in women's somatotype with aging. The subjects were 1,123 women aged 40~69. Their anthropometric data were from the 6th Size Korea. The data were analyzed by factor analysis and cluster analysis. Seven factors were extracted: body mass, body length, back shoulder, arm length factor, front interscye factor, body rise factor, and shoulder angle. The upper body types of middle-aged and elderly women were classified into five types: skinny, short stout body type with forward posture, composite, tall & full body type, and short & skinny. The skinny and composite body type appeared more often than the short stout body type in the early 40s of Korean women. Starting in the mid-50s, composite body type was less often found. However, the number of women with short stout body type increased. In the 60s, the number of women with short stout and tall & full body types decreased. These results reveal that the body types of middle-aged and elderly women changed with some pattern with aging. And women in their early 40s, mid-50s, and 60s women had different body shapes and postures.