• 한국통신학회논문지
• /
• 제24권9A호
• /
• pp.1372-1382
• /
• 1999

B-ISDN과 같은 초고속 네트워크에서 전송오류의 주요원인은 과잉밀집 상태에 있어서의 버퍼 오버플로우이며 이로 인해 셀손실을 야기한다. 기존의 통신 프로토콜은 손실된 패킷이나 전송에러들을 다루기 위해 ARQ와 같이 오류탐지와 재전송 기법을 사용하고 있으나 이러한 ARQ 방법들은 재전송으로 인한 전송 지연시간이 매우 크기 때문에 초고속 네트워크에서는 적합하지 않다. 따라서 본 논문은 이러한 문제를 줄이기 위하여 B-ISDN에서 Forward Error Correction(FEC)를 이용하여 셀손실 회복방법의 셀손실율을 수치적으로 분석하였다. FEC 기법은 Two-state Markov 모델인 셀손실 프로세스 모델을 기초한 성능평가에서 상당한 낮은 셀손실율을 나타내었으며 ATM 네트워크에 인터리빙의 적용은 버스티한 트래픽을 랜덤(random)하게 배열하게 함으로서 셀손실율을 개선할 수 있음을 보이고 있다. 이러한 요소들은 향후 오류제어 기법 설계시 고려해야 할 주요요소로 사용될 수 있다. 또한 IP-over-ATM 네트워크에서 신뢰성 있는 IP 패킷의 전달을 위하여 FEC 기법의 효과에 관한 성능을 분석하고 평가하였다. 본 성능평가의 결과로 FEC 기법은 IP-over-ATM 환경에\ulcorner 신뢰성이 있는 IP 전달을 위한 해결책을 제시한다.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.626-632
• /
• 2003

본 논문에서는 모드정합법을 이용하여 도체두께를 고려한 비대칭 결합선로의 특성을 해석하고, 중심주파수 5㎓ 인 정방향 -3㏈ 방향성 결합기를 설계 및 제작하였다. 결합선로의 결합도에 대한 연구는 대부분 기하학적인 구조의 변화에 대해 연구되어 왔으나, 본 논문에서는 도체두께가 비대칭 결합선로의 간격, 선로 폭, 결합기의 길이에 미치는 영향을 이론적으로 분석하고, 도체두께를 고려한 비대칭 결합선로를 이용한 결합기를 설계하여 도체 두께가 두꺼울수록 강한 결합으로 인하여 정방향 결합기의 결합길이가 짧아지고 광대역 특성이 얻어지는 결과를 얻었다. 본 논문에서는 5㎓ 중심주파수로 한 도체두께가 서로 다른 비대칭 결합선로로 구성된 정방향 -3㏈ 결합기를 설계하고, 제작 및 실험을 통하여 약 -4.05㏈∼-4.09㏈의 결합특성을 갖는 주파수특성 측정결과를 얻어 설계 값에 거의 근접하는 것을 확인하였으며, 도체 두께를 고려한 정확한 설계로써 결합선로에서 강한결합과 광대역 특성을 만들 수 있다는 사실을 확인하였다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.444-457
• /
• 2014

This paper presents the design and realization of a digital PV simulator with a Push-Pull Forward (PPF) circuit based on the principle of modular hardware and configurable software. A PPF circuit is chosen as the main circuit to restrain the magnetic biasing of the core for a DC-DC converter and to reduce the spike of the turn-off voltage across every switch. Control and I/O interface based on a personal computer (PC) and multifunction data acquisition card, can conveniently achieve the data acquisition and configuration of the control algorithm and interface due to the abundant software resources of computers. In addition, the control program developed in Matlab/Simulink can conveniently construct and adjust both the models and parameters. It can also run in real-time under the external mode of Simulink by loading the modules of the Real-Time Windows Target. The mathematic models of the Push-Pull Forward circuit and the digital PV simulator are established in this paper by the state-space averaging method. The pole-zero cancellation technique is employed and then its controller parameters are systematically designed based on the performance analysis of the root loci of the closed current loop with $k_i$ and $R_L$ as variables. A fuzzy PI controller based on the Takagi-Sugeno fuzzy model is applied to regulate the controller parameters self-adaptively according to the change of $R_L$ and the operating point of the PV simulator to match the controller parameters with $R_L$. The stationary and dynamic performances of the PV simulator are tested by experiments, and the experimental results show that the PV simulator has the merits of a wide effective working range, high steady-state accuracy and good dynamic performances.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.2201-2202
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.569-570
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.213-214
• /
• 2008

In this paper, we analyze the performance of a cooperative communication wireless network over independent and identically distributed (IID) Nakagami-m fading channels. A simple transmission scheme is considered where the relay is operating in amplify-forward (AF) mode. A closed-form expression for symbol error rate (SER) is obtained using the moment generating function (MGF) of the total signal to noise ratio (SNR) of the transmitted signal with binary phase shift keying (BPSK).

• Journal of applied mathematics & informatics
• /
• 제19권1_2호
• /
• pp.215-229
• /
• 2005

In this paper, constraint aggregation is combined with the adjoint and multiple shooting strategies for optimal control of differential algebraic equations (DAE) systems. The approach retains the inherent parallelism of the conventional multiple shooting method, while also being much more efficient for large scale problems. Constraint aggregation is employed to reduce the number of nonlinear continuity constraints in each multiple shooting interval, and its derivatives are computed by the adjoint DAE solver DASPKADJOINT together with ADIFOR and TAMC, the automatic differentiation software for forward and reverse mode, respectively. Numerical experiments demonstrate the effectiveness of the approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1235-1236
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1695-1696
• /
• 2006

In this paper, we designed high performance, high quality and high density switch mode power supply for precision electronics, and communication equipments. For this, we used two parallel DC-DC converters, which have opposite phases, to support proper high performance and high quality power. To reduce switching losses and make high switching frequency, active-clamp and ZVS technique were employed in each converter.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.674-682
• /
• 2017

This paper presents an optimal initial firing angle control based on the energy consumption and regenerative energy of a parallel multi-pulse thyristor dual converter for urban railway power substations. To prevent short circuiting the thyristor dual converter, a hysteresis band for maintaining a zero-current discontinuous section (ZCDS) is essential during mode changes. During conversion from the ZCDS to forward or reverse mode, the DC trolley voltage can be stabilized by selecting the optimal initial firing angle without an overshoot and slow response. However, the optimal initial firing angle is different depending on the line impedance of each converter. Therefore, the control algorithm for tracking the optimal initial firing angle is proposed to eliminate the overshoot and slow response of DC trolley voltage. Simulations and experiments show that the proposed algorithm yields the fastest DC voltage control performance in the transient state by tracking the optimal firing angle.