• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.266-268
• /
• 2005

A new synchronous switch controlled transient current build-up zero voltage switching (TCB-ZVS) forward converter is proposed. The proposed converter is suitable for the low-voltage and high-current applications. The features of the proposed converter are low conduction loss of magnetizing current, no additional circuit for the ZVS operation, high efficiency, high power density and low EMI noise throughout all load conditions.

• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.140-149
• /
• 2017

This study proposes a new type of active-clamp forward-flyback converter with two transformers that operate in forward and flyback modes during on and off times, respectively, instead of not using an output inductor. The main switch can be turned on with zero-voltage switching (ZVS) using the leakage inductance of the transformer and the output capacitor of the main switch. The leakage inductance should be increased to ZVS. However, the ringing between the leakage inductance of the transformer and the parasitic output capacitance of the secondary side rectifier switches results in a serious voltage spike. A forward-flyback converter employing auxiliary inductor and auxiliary diode is proposed to overcome the problem. The operational principles are analyzed in detail and validated through experiments with a 385 V-to-53 V/37 A prototype.

• 조명전기설비학회논문지
• /
• 제19권7호
• /
• pp.60-66
• /
• 2005

본 연구에서는 단일전력단 Two-Switch Forward 컨버터에 관하여 논하였다. 최근 국제적으로 제정된 ICE 61000-3-2와 IEEE 519같은 규정에서 입력 전류에 대한 고조파 규제가 강화되면서 전원 공급 장치의 역률개선 회로가 필수적으로 되었다. 따라서 본 연구에서는 저전압 대전류 출력에 적합한 방안으로 단일전력단 Two-Switch Forward 컨버터 회로를 제안하고, 모드별 동작, 특성 및 설계에 관하여 논하였으며, MOSFET를 사용하여 200[W](5[V], 40[A])급 시작품을 제작, 100[kHz]에서 실험하였다.

• 전력전자학회논문지
• /
• 제10권6호
• /
• pp.592-597
• /
• 2005

푸시 풀 포워드 컨버터는 넓은 입력범위에서 저전압 대전류 특성이 좋고 싱글 EI-EE 코어에 출력 인덕터와 변압기 그리고 입력 필터 등 모든 자성소자들을 포함시킴으로써 집적화할 수 있다. 회로의 여러 변수들에 대한 효율 비교를 통해서 집적화된 싱글 코어 푸시 풀 포워드 컨버터에 대해 고찰하였다. 푸시 풀 포워드 컨버터의 변압기는 Nicera사의 5M FEE 18/8/10C와 NC-2H FEI32/8/10C 코어를 이용하였다. 컨버터의 정격은 입력 전압 $36\~72V$이며 출력은 3.3V, 30A이다. NC-2H FEI32/8/10C코어를 사용하였을 경우 스위칭 주파수가 200kHz이고 부하가 11A일 때 $83.5\%$의 최고 효율이 측정되었다. 전부하(full load)시의 효율은 $76.4\%$, 반부하(half load)일 경우에는 $82.95\%$의 효율이 각각 측정 됐다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.235-238
• /
• 2003

This paper presents an ZVT(Zero Voltage Transition) Forward Converter using Primary Auxiliary Circuit operation. An auxiliary resonant circuit was added to the basic forward converter, implementing the fVT technique for the main switch. The switch employed by the auxiliary circuit operates under Zero-Current-Switching(ZCS) condition. The complete operating principle, simulation and experimental results are presented

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1309_1310
• /
• 2009

The topology of active clamp forward converter provides ZVS characteristic and also the stress of voltage and current is smaller than that of the conventional forward converters. The benefits of this technique include a higher efficiency at a high switching frequency, lower EMI/RFI. In this paper, the active clamp forward converter is designed for operation in wide range voltage and has 19.5V/120W ratings with efficiency more than 90%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.226-228
• /
• 2005

This paper presents the single-stage High Power Factor TTFC(Two-Transistor Forward Converter). Recently, due to growing concern about the harmonic pollution of power distribution systems and the adoption of standards such as ICE 61000-3-2 and IEEE 519, There is a need to reduce the harmonic contests of AC line currents of power supplies. This research proposed the single-stage two switch forward circuit for low voltage and high current output.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.36-39
• /
• 2003

The push pull forward converter is a very suitable circuit for low output voltage, high output current applications with a wide input voltage range. All the magnetic components (output inductor, transformer, input filter) can be integrated into a single core. The integrated magnetics can reduce the number of the magnetic components. Developed the push pull forward converter rating are of 36 $\~$72V input and 3.3V/30A output. In this converter, the efficiency was measured by $76.4\%$ at full load and 82.95$\%$ at full load. The maximum efficiency is up to 83.$\%$ at 200kHz switching frequency, l1A output.

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.112-120
• /
• 1997

The clamp mode (CM) forward zero voltage switching multi resonant converter (ZVS-MPC) with self-driven synchronous rectifier is studied. The loss at the synchronous rectification stage of the converter is analyzed using MOSFET piecewise linear model and is compared with the loss at the conventional schottky diode rectification stage of th econverter. From the results of the analysis, it is known that the use fo MOSFETs as a synchronous rectifier reduces the loss at the rectification stage overthe whole load range comparing the use of schottky diodes as a conventional rectifier in the converter. In order to verify the validit of the analysis, we have built a 33W(3.3V/10A) CM forward ZVS-MRC with self-driven synchronous rectifier, in which switching frequency is 1MHz, and tested. FRom the experimental results, it is known that the synchronous rectification achieved about 1W improvement in the loss at the rectification stage and about 3% in the efficiency at the converter as compared with the conventional schottky diode rectification.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.965_966
• /
• 2009

In this paper, a new soft-switching Two-switch Forward converter topology has been proposed. Compared with conventional two-switch forward converter, the proposed converter employs an auxiliary switch and a clamp capacitor to instead of two reset diodes, not only its duty cycle can exceed 0.5 to achieve wide range input voltage, but also soft switching can be achieved for all switches. Especially, voltage stress across main switches can be clamped at $1/2V_{in}$, voltage stress across auxiliary switch can be clamped at $V_{in}$. In addition, due to clamp capacitor series with the transformer, duty ratio can be extended with equation $V_o=\frac{V_{in}(1-D}D{N}$. Therefore, as a kind of better cost-effective approach, it is very attractive for high input, wide range and high efficiency application.