References
- R. J. Wai, C. Y. Lin, R. Y. Duan, and Y. R. Chang, "High-efficiency DC-DC converter with high voltage gain and reduced switch stress," IEEE Transactions on Industrial Electronics, Vol. 54, No. 1, pp. 354-364, Feb. 2007. https://doi.org/10.1109/TIE.2006.888794
- G. Hua, C. S. Leu, and F. C. Lee, "Novel zero-voltage transition PWM converters," IEEE Transactions on Power Electronics, Vol. 9, No. 2, pp. 213-219, Mar. 1994. https://doi.org/10.1109/63.286814
- T, Zhang, P. C. Sen, and Y. F. Liu, "A novel zero voltage switched(ZVS) buck converter using coupled inductor," Proc. Canadian Conf. Electrical and Computer Engineering, Vol. 1, pp. 357-362, May 2011.
- H. L. Do, "Zero-voltage-switching synchronous buck converter with a coupled inductor," IEEE Transactions on Industrial Electronics, Vol. 58, No. 8, pp. 3440-3447, Aug. 2011. https://doi.org/10.1109/TIE.2010.2084973
- J. A. Sabate, V. Vlatkovic, R. B. Ridely, F. C. Lee, and B. H. Cho, "Design considerations for high-voltage high power full-bridge zero-voltage-switched PWM converter," Proc. IEEE APEC'90(IEEE Catalog No. CH2853-0/90/0000-0265), pp. 275-284, 1990.
- P. K. Jain, W. Kang, H. Soin, and Y. Xi, "Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology," IEEE Transactions on Power Electronics, Vol. 17, No. 5, pp. 649-657, Sep. 2002.
- L. H. Mweene, C. A. Wright, and M. F. Schlecht, "A 1kW 500kHz front-end converter for a distrbuted power supply system," IEEE Transactions on Power Electronics, Vol. 6, No. 3, pp. 398-407, Jul. 1991. https://doi.org/10.1109/63.85908
- I. Cohe, D. Hills, and N. Y, "Pulse width modulated DC/DC converter with reduced ripple current stress and zero voltage switching capability," U.S Patent 5291382 A.
- Y. H. Kang, B. C. Choi, and W. S. Lim, "Analysis and design of a forward-flyback converter employing two transformers," PESC (Power Electronics Specialists Converence), Vol. 1, pp. 357-362, Jun. 2001.
- Y. Xi, P. K. Jain, G. Joos, and H. Jin, "A zero voltage switching forward converter topology," Proc. Telecommunications Energy Conf., pp. 116-123, Oct. 1997.
- Y. K. Lo and J. Y. Lin, "Active-clamping ZVS flyback converter employing two transformers," IEEE Transactions on Power Electronics, Vol. 22, No. 6, pp. 2416-2423, Nov. 2007. https://doi.org/10.1109/TPEL.2007.909285
- Y. Y. Wen, H. Mao, and I. Batarseh, "DC bias analysis and small signal forward-flyback dc-dc converter with a current doubler rectifier," APEC 2005, Vol. 3, pp. 1531-1536, 2005.
- B. R. Lin, H. K. Chiang, and C. C. Chen, "Analysis of a zero-voltage switching converter with two transformers," IEEE Transactions on Circuits and Systems II, Vol. 53, No. 10, pp. 1088-1092, Oct. 2006. https://doi.org/10.1109/TCSII.2006.882352
- H. K. Yoon, E. S. Choi, S. K. Han, G. W. Moon, and M. J. Youn, " Zero-voltage and zero-current switching two transformer full-bridge converter using the output voltage doubler," IPEMC (Power Electronics andd Motion Control Conference) , Vol. 2, pp. 1-5, Aug. 2006.
- H. K. Yoon, S. K. Han, J. S. Park, G. W. Moon, and M. J. Youn, "Zero-voltage switching two-transformer full-bridge PWM converter with lossless diode-clamp rectifier for PDP sustain power module," IEEE Transactions on Power Electronics, Vol. 21, No. 5, pp. 1243-1252, Sep. 2006. https://doi.org/10.1109/TPEL.2006.880346
- Hren, Alenka, J. Korelic, and M. Milanovic, "RC-RCD clamp circuit for ringing losses reduction in a flyback converter," IEEE Transactions on Circuits and Systems II, Vol. 53, No. 5, pp. 369-373, May 2006. https://doi.org/10.1109/TCSII.2006.870547
- J. A. Cobos, "RCD clamp PWM forward converter with self driven synchronous rectification," IECON (Industrial Electronics, Control, and Instrumentation), Vol. 2, pp. 1336-1341, Nov. 1993.