• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.139-142
• /
• 2009

As important mechanical elements, gears have been used widely in power transferring systems such as automobile transmission and there have been several researches trying to make gear parts with cold or warm forging in order to reduce cost and time required to gear manufacturing process. Although forging processes of spur and bevel gears have been developed as practical level owing to active previous researches in Korea, the manufacturing of helical gear has been still depended on traditional gear cutting processes such as hobbing, deburring and shaving. In order to manufacture helical gears with cold forging process, a research project supported by government has been conducted by Daegu university, KIMS and TAK and this paper deals with effects of back pressure forming technique to cold forging of helical gear as a fundamental research.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.70-73
• /
• 2007

The forming characteristics of cup-rod combined extrusion process were investigated with process parameter change. Simultaneous forward rod extrusion and backward cup extrusion was conducted with magnesium alloy, AZ31B. Process parameters such as forward extrusion ratio, backward extrusion ratio, and working temperature were controlled in a specific region and the effects of the parameter change were examined. Surface crack was developed in a certain state of the process parameters combination. The crack-free forming limit of the alloy in the combined process was disclosed by the parameter study. The microstructures of the initial and extruded workpieces were observed.

• 소성∙가공
• /
• 제7권6호
• /
• pp.586-593
• /
• 1998

In recent automotive industries there has been significant increase in applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles. Enhancement of die quality and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However to successfully apply the result of simulation by a commercial package to the die manufacturing development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcoming of available sheet metal forming softwares. Based on the results of numerical analysis of front door outer panel forming. this paper evaluates the applicability of simulation results to the real die manufacturing for automotive body panels. Also it attempts to select an optimal die manufacturing process including design machining and tryout. Lastly it discusses the expected effects by adopt-ing the selected process in a real stamping die manufacturing facility.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.33-40
• /
• 1998

In recent domestic automotive industry, applications of computer simulation to the manufacturing of stamping dies for inner and outer body panels which greatly affect durability and aesthetic quality of automobiles, have been increased. Enhancement of die quality, and reduction of total die manufacturing time and consequently manufacturing cost are the visible outcome. However, to successfully apply the result of simulation by a commercial package to the die manufacturing, development of an optimal die manufacturing process is required upon the completion of analysis of forte and shortcomings of available sheet metal forming softwares in the market. Based on the results of numerical analysis of front door outer panel forming, this paper evaluates the applicability of simulation results to the real die making for automotive body panels. Also, it attempts to select an optimal die manufacturing process including design, machining and tryout. Lastly, it discusses the expected effects by adopting the selected process in a real stamping die manufacturing facility.

• 소성∙가공
• /
• 제6권2호
• /
• pp.152-160
• /
• 1997

Three-Dimensional finite element analysis is performed using PAM-STAMP for design evaluation of automotive back door inner panel die. Gravity process by blank own weigth, binder-wrap process, and drawing process in the forming operations are sequentially simulated with Virtual Manufacturing Method. The most valuable result in this research is that 3-D FEM analysis can be applied to the design evaluation of draw dies in the die try-out, though effects of mesh size and drawbead resistance force on the try-out, the experimental knowhows about the forming variables such as friction coefficient punch velocity, drawbead force, etc are necessary.

• Journal of Nutrition and Health
• /
• 제26권1호
• /
• pp.3-12
• /
• 1993

This study was performed to investigate effects of dietary fat content and degree of saturation on the function of the immune system. Sixty male BALB/c mice average-weighing 17g were divided into three dietary groups: 5% safflower oil group, 20% safflower oil group, 19.3% beef tallow & 0.7% safflower oil group. Food intake and body weight were measured every day. At 4th, 7th, 10th week after dietary treatment, organ weight measurements, delayed-type hypersensitivity test, plaque forming cell test, agglutination test, differential white cell count and histological examination of spleen were performed. Results are follows; 1) Body weight, food intake and calorie intake were not different in the three dietary groups during the experimental period($\alpha$=0.05). 2) Liver weight was significantly higher in 5% safflower oil group($\alpha$=0.05). Spleen index was slightly higher in mice fed 5% safflower oil and 19.3% beef tallow & 0.7% safflower oil. Thymus index in all mice was decreased by aging. 3) Delayed-type hypersensitivity of the mice fed 5% safflower oil and 19.3% beef tallow & 0.7% safflower oil was significantly higher than that of the mice fed 20% safflower oil. 4) The number of plaque forming cell was significantly reduced at 10th week compared to 7th week in all group($\alpha$=0.05). Although there was no difference in plaque forming cell among three groups at 10th week, 5% safflower oil group showed slightly higher plaque forming cell than 20% safflower oil group at 7th week. 5) At 4th week, agglutination test seems to be higher in 5% safflower oil group and 19.3% beef tallow & 0.7% safflower oil group compared to 20% safflower oil group. 6) Percentage of neutrophil and eosinophil was slightly reduced in 20% safflower oil group. 7) Spleen tissue was not affected by and dietary treatments. According to our results, the higher the fat content & unsaturation of the diet the lower the cell-mediated immunity of the mice. Humoral-immunity did not appear to be affected by the dietary manipulation. However humoral-immunity was decreased significantly by aging in all dietary groups.

• 천문학회보
• /
• 제42권1호
• /
• pp.49.2-49.2
• /
• 2017

Star forming dwarf galaxies in various environments are attractive objects for investigating the environmental effects on chemical evolution of dwarf galaxies. Using SDSS DR7 spectroscopic data and GALEX ultraviolet (UV) imaging data, we study the chemical properties of star forming dwarf galaxies in various environments of the Virgo cluster, Ursa Major group, and field. We derived gas-phase abundance, galaxy mass, and UV specific star formation rate (sSFR) of subsample, early-type (ETD) and late-type star forming dwarf (LTD) galaxies, which are divided by visually classified galaxy morphology. We found no O/H enhancement of LTDs in cluster and group environments compared to the field, implying no environmental dependence of the mass-metallicity relation for LTDs. LTDs in the Virgo cluster and Ursa Major group have similar sSFR at a given galaxy mass, but they exhibit systematically lower sSFR than those in isolated field environment. We suggest that LTDs in the Virgo cluster are an infalling population that was recently accreted from the outside of the cluster. We found that ETDs in the Virgo cluster and Ursa Major group exhibit enhanced O/H compared to those in the field. However, no distinct difference of N/O of galaxies between different environments. The chemically evolved ETDs in the Virgo cluster and Ursa Major group also show similar mass-sSFR relation, but systematically lower sSFR at a fixed galaxy mass compared to the field counterparts. We suggest that ETDs in the Virgo cluster and Ursa Major group have evolved under the similar local environments. We also discuss the evolutionary path of ETDs and LTDs with respect to the environmental effects of ram pressure stripping and galaxy interaction/merging.

• 약학회지
• /
• 제36권4호
• /
• pp.291-302
• /
• 1992

Effects of Zinc chloride on the immune responses were studied in ICR mice. ICR male mice were divided into 5 groups(10 mice/group) and Zinc chloride at doses of 0.3, 1.2, 4.8 and 19.2 mg/kg were orally administered to ICR male mice once a day for three weeks. Mice were sensitized and challenged with sheep red blood cells(S-RBC). The results of this study were summarized as follows; (1) Zinc chloride significantly increased the body weight rate, the weight ratios of spleen and thymus to body weight and the number of circulating leukocyte, but significantly decreased them at the high dose of it, and increased dose-dependently the weight ratio of liver to body weight. (2) Zinc chloride significantly increased hemagglutination titer, Arthus reaction and plaque forming cell related to humoral immunity, but significantly decreased them at the high dose of it. (3) Zinc chloride significantly increased delayed-type hypersensitivity reaction and rosette forming cell related to cellular immunity, but significantly decreased them at the high dose of it. (4) Zinc choride significantly enhanced phagocytic activity, but significantly decreased according to the increase of its dose. These results suggest that high dose of zinc chloride decreased humoral, cellular and non-specific immune responses.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.172-179
• /
• 1998

The effects of $^{60}Co\;{\gamma}-Ray$ irradiation on TSC characteristics of TFE type polytetrafluoroethylene(PTFE) were investigated. The $\alpha$ peak on TSC curve of PTFE was decreased, while the $\beta$ peak was reversely increased by the increasing of $\gamma$-irradiation doses up to 80 krad(0.8 kGy). Moreover, $\alpha$ and $\beta$ peaks on TSC curve of the irradiated PTFE are changed with the increasing of the forming temperature and forming electric field. In annealing the irradiated PTFE specimens at room temperature in air, it was shown a continuous recovery of TSC characteristics with time, which is assumed the traped charge carriers are liberated from the shallow traps and undergoes a recombination process during room temperature decay.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권2호
• /
• pp.82-87
• /
• 2007

The electrical properties of metallic junction diodes and metallic source/drain (S/D) Schottky barrier metal-oxide-semiconductor field-effect transistor (SB-MOSFET) were simulated. By using the abrupt metallic junction at the S/D region, the short-channel effects in nano-scaled MOSFET devices can be effectively suppressed. Particularly, the effects of trap states at the metal-silicide/silicon interface of S/D junction were simulated by taking into account the tail distributions and the Gaussian distributions at the silicon band edge and at the silicon midgap, respectively. As a result of device simulation, the reduction of interfacial trap states with Gaussian distribution is more important than that of interfacial trap states with tail distribution for improving the metallic junction diodes and SB-MOSFET. It is that a forming gas annealing after silicide formation significantly improved the electrical properties of metallic junction devices.