• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.603-610
• /
• 2005

Beam-forming method based on the estimated channel information at the base station degrade the performance mismatching directional vector in case of systems which Frequency Division Duplex (FDD) center frequency of uplink and downlink are different. Also blind estimation technique which is to obtain directional vector of reverse link through received signal has disadvantage of hardware complexity increase. To solve these problems, in present paper, a smart antenna algorithm which is to improve the beam-forming complexity increase due to user number by appling the spatial fourier transform to be able to beam- forming toward a wanted direction through adjusting a obtained uplink weight function by estimating Angle-of-Arrival (AoA) to the competable form at the downlink is proposed. The proposed algorithm is integrated to the CDMA downlink transmitter and simulations are performed to confirm the performance as frame error rate at the receiver. As a result, the beam forming effect is confirmed and the performance gain with the proposed algorithm is comparable to ordinary smart antenna system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.110-121
• /
• 2009

It is essential to embed product quality in the design process to win the global competition. Many components found in many products including automobiles and electronic devices are fabricated using sheet metal forming processes. Wrinkle and fracture are two types of defects frequently found in the sheet metal forming process. Reducing such defects is a hard problem as they are affected by many uncontrollable factors. Attempts to solve the problem based on traditional deterministic optimization theories are often led to failures. Furthermore, the wrinkle and fracture are conflicting defects in such a way that reducing one defect leads to increasing the other. Hence, it is a difficult task to reduce both of them at the same time. In this research, a new design method for reducing the rates of conflicting defects under uncontrollable factors is presented by using operating window and a sequential search procedure. A new SN ratio is proposed to overcome the problems of a traditional SN ratio used in the operating window technique. The method is applied to optimizing the robust design of a sheet metal forming process. To show the effectiveness of the proposed method, a comparison is made between the traditional and the proposed methods using simulation software, applied to a design of particular sheet metal forming process problem. The results show that the proposed method always gives a more robust design that is less sensitive to noises than the traditional method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.3
• /
• pp.181-186
• /
• 2017

Single point incremental forming (SPIF) is a sheet-forming technique. It is a die-less sheet metal manufacturing process for rapid prototyping and small batch production. The Critical parameters in the forming process include tool diameter, step depth, feed rate, spindle speed, etc. In this study, these parameters and the die shape corresponding to the Varying Wall Angle Conical Frustum(VWACF) model were used for forming 0.8mm in thick Al5052-O sheets. The Taguchi method of Experiments of Design (DOE) and Grey relational optimization were used to determine the optimum parameters in SPIF. A response study was performed on formability, spring back, and thickness reduction. The research shows that the optimum combination of these parameters that yield best performance of SPIF is as follows: tool diameter, 6mm; spin speed, 60rpm; step depth, 0.3mm; and feed rate, 500mm/min.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.545-548
• /
• 2000

Adaptive array systems are hard to remove all the interferences when incident signals are coherent with a desired signal. In this paper, we propose a modified Duvall beamformer, which performs spatial smoothing using spatial interpolation technique to maintain the degree of freedom. The propose algorithm can minimize the loss on the degree of freedom due to spatial smoothing by forming subarrays with interpolated signals. Simulation results show that the proposed algorithm can remove all the interferences while conventional beamformer cannot.

• Journal of the Korean institute of surface engineering
• /
• v.33 no.2
• /
• pp.107-114
• /
• 2000

In this study, we investigated the possibility of the application of the EzROBO system to direct shaping techniques which can make arbitrary shapes without any specific mold. We formed arbitrary shapes using raw materials of EH-260D (Epoxy＋Binder) with the conditions of $250\mu\textrm{m}$ layer thickness, 0.2MPa working pressure, 20mm/sec working velocity, and 1.8mm needle thickness. The developed Spatial Printing Technique showed enhanced working velocity and lower cost than existing 3DP process, and is expected to replace the existing process through the process optimization in the future.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.355-359
• /
• 2000

This paper deal with the harmonic reduction technique in three-phase square-wave inverter system formed by single-phase inverter. To reduce the harmonics six single-phase inverters are used for forming multi-phase inverter and zig-zag connected output transformer for eliminating the harmonic 6(2k-1)$\pm$1 orders. And an ac filter is furnished at output side. Computer simulations show that the THD of the output voltage can be reduced immensely.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.133-136
• /
• 2002

It is very important to get a stable and large-capacity organic effusion source for achievement of OLED mass-production equipment. We present an organic effusion source with film uniformity less than ${\pm}$ 5%, the material charge volume, 300cc for $400{\times}400\;mm^2$ substrate. The fine metal shadow mask alignment technology, one of the color forming technique, also have to support more accurate and fast operating in mass-production. In this paper, we will describe the OLED mass-production equipment with the large volume effusion source and the precision shadow mask alignment technique.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.55 no.3
• /
• pp.109-115
• /
• 2006

The Weibull distribution is a good candidate for accurate probabilistic model with its rich shape-forming ability and relatively simple CDF(cumulative distribution function). If there are sufficient information to get convincible mean and variance for a probabilistic event, reliable parameters of the Weibull distribution can be determined uniquely. However, sufficient information is not given as usual. There needs more deliberate model building method for that case. This Paper presents an effective parameter estimation technique for Weibull distribution with limited failure data.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.629-632
• /
• 1998

This paper presents a new and simple technique to realize high Q inductor on low resistivity silicon wafer with 6 $\Omega$.cm. This technique is very compatible with bipolar and CMOS standard silicon process. By forming the deep and narrow trenches on the low resistivity wafer substrate under inductor pattern, oxidizing and filling with undoped polysilicon, the low resistivity silicon wafer acts as high resistivity wafer being suitable for the fabrication of high Q inductor. By using this technique the quality factor (Q) for 8-turn spiral inductor was improved up to max. 10.3 at 2 ㎓ with 3.0 $\mu\textrm{m}$ of metal thickness. The experiment results show that Q on low resistivity silicon wafer with the trench technique have been improved more than 2 times compared to the conventional low resistivity silicon wafer without trenches.

• International Journal of Quality Innovation
• /
• v.6 no.2
• /
• pp.31-45
• /
• 2005

The target costing technique, mathematically discussed by Sauers, only uses the $C_p$ index along with Taguchi loss function and ${\bar{X}}-R$ control charts to set up goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p$ value to ${\bar{X}}-R$ control charts to obtain goal control limits. This study further considers the reflected normal loss function as well as the $C_{pk}$ index along with its lower confidence interval in forming goal control limits. With the use of lower confidence interval to replace the point estimator of the $C_{pk}$ index and reflected normal loss function proposed by Spiring to measure the loss to society, this modified and improved target costing technique would become more robust and applicable in practice. Finally, an example is provided to illustrate how this modified and improved target costing technique works.