• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.123-128
• /
• 2000

Fundamental and informative data of axi-symmetric stretch-drawing of several sheetmetals with thicknesses of 0.7-1.0mm are presented both for single and double operations. Very small radius is applied to the die profile (or-shoulder) ion all operations. to induce wall-thinning by the effect of bending-under-tension from which the name 'stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by single and double stretch-drawings from smaller circular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks, From this fact it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional L.D.R (limiting drawing ratio) but the depth of the drawn cup should also be taken into account./ Many experimental data about various metals and thicknesses given in this paper offer a valuable information in this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation.

• 천문학회보
• /
• 제43권1호
• /
• pp.59.3-59.3
• /
• 2018

With a recent observational study of extended Lyman-alpha halos around individual high-z star-forming galaxies by Leclercq et al. (2017) using MUSE, we perform radiative transfer calculations to see if Lyman-alpha scattering can explain the spatial extents of the halos together with their spectra. We adopt a spherically-symmetric halo model in which Lyman-alpha sources and neutral hydrogen (HI) medium have exponential density distributions. The HI medium is set to have outflowing motion based on a momentum-driven wind scenario in a gravitational potential well. We run our Lyman-alpha radiative transfer code, LaRT, upon this halo model for various sets of parameters regarding the HI medium such as temperature, optical depth, density scale radius, outflow velocities, and dust content. We analyze simulation results to see the impact of each parameter on Lyman-alpha spectra and surface brightness profiles, and degeneracies between the parameters. We also find a parameter set that best reproduces simultaneously the observed spectra and surface brightness profiles of the MUSE Lyman-alpha halos.

• 연구논문집
• /
• 통권26호
• /
• pp.121-132
• /
• 1996

The carburising surface modification treatment of the die steel has been used for improving wear resistance and heat cycle strength of the die and preventing a pitting on the surface because the carbides are forming in the matrix during carburising. Generally, the hot forging die was used after quenching-tempering treatment or nitriding after quenching-tempering treatment. The nitriding after carburising on the surface of a hot die steel and a wear resistance die steels was suggested by SOUCHARD, JACQUOT. and BUVRON. This surface modification treatment improved the adhesive and abrasive wear resistance and friction coefficient. The process was introduced to the forging die of stainless steel, titanium alloy steel, alloy and medium carbon steel and the physical properties of the die after the treatment were improved. The surface hardening treatment of the nitriding, the carburising, the boriding, and TD process were used to improved the life time of the forging die. Also, the coating process of PVD, CVD and PCVD were used and the hard chromium plating was occasionally used. Therefore, this study analyzed the effects of the carburising time and the conditions of nitriding on STD61 steel. The case depth, the surface hardness, the forming carbide size and shape during overcarburising process on the die steel were also examined.

• 가정과삶의질연구
• /
• 제29권1호
• /
• pp.1-19
• /
• 2011

The purpose of this study is to qualitatively investigate how career women form their self-identity in relationship to their parents from the viewpoint of life-span development, and to provide practical information helpful for understanding the change of relationship between parents and adult children and forming desirable parents-daughter relationships by developing the substance theory which suits the socio-cultural context of Korea. In this study, 24 unmarried women who have parents and engage in professional jobs were selected for an in-depth interview. From the findings of this study, 67 concepts, 29 subordinate categories and 13 categories were extracted during the process of open-coding; a research model was then constructed according to the paradigm of the grounded theory. It was found that there are three types: the reality-convinced type, the conflict-compromising type and the self-regulated type who "persistently worry about themselves and try to develop". These results verify the process of career women "worrying about themselves and developing constantly" and its structure by forming their self-identities, adjusting the effects of several contextual factors and using mediatory strategies in the developmental process of self-identity.

• ETRI Journal
• /
• 제44권2호
• /
• pp.286-299
• /
• 2022

Human activity recognition in real time is a challenging task. Recently, a plethora of studies has been proposed using deep learning architectures. The implementation of these architectures requires the high computing power of the machine and a massive database. However, handcrafted features-based machine learning models need less computing power and very accurate where features are effectively extracted. In this study, we propose a handcrafted model based on three-dimensional sequential skeleton data. The human body skeleton movement over a frame is computed through joint positions in a frame. The joints of these skeletal frames are projected into two-dimensional space, forming a "movement polygon." These polygons are further transformed into a one-dimensional space by computing amplitudes at different angles from the centroid of polygons. The feature vector is formed by the sampling of these amplitudes at different angles. The performance of the algorithm is evaluated using a support vector machine on four public datasets: MSR Action3D, Berkeley MHAD, TST Fall Detection, and NTU-RGB+D, and the highest accuracies achieved on these datasets are 94.13%, 93.34%, 95.7%, and 86.8%, respectively. These accuracies are compared with similar state-of-the-art and show superior performance.

• 천문학회보
• /
• 제44권2호
• /
• pp.37.1-37.1
• /
• 2019

We perform Lyα radiative transfer calculations for reproducing Lyα properties of star-forming galaxies at high redshifts. We model a galaxy as a halo in which the density distributions of Lyα sources and HI plus dust medium are described with exponential functions. We also consider an outflow of the medium that represents a momentum-driven wind in a gravitational potential well. We demonstrate that this outflowing halo model with Lyα scattering can successfully reproduce both the spectrum and the surface brightness profile of eight star-forming galaxies at z=3-6 observed with MUSE. The best-fit model parameters (i.e., the outflowing velocity and optical depth) for these galaxies are in good agreement with other studies. We also demonstrate benefits of using spectrum and surface brightness profile simultaneously to the constraints on model parameters and thus spatial/kinematic distributions of medium. We examine the impacts of individual model parameters and intrinsic spectrum on emerging spectrum and surface brightness profile. Further investigations on the escape fraction, spatially resolved spectra, and the spatial extent of Lyα halos are presented as well.

• Steel and Composite Structures
• /
• 제36권2호
• /
• pp.119-141
• /
• 2020

In this paper, wavy square absorbers were experimentally and numerically investigated. Numerical simulations were performed with LS-Dyna software on 36 wavy absorbers and their crushing properties were extracted and compared with the simple one. The effect of different parameters, including wave height, wave depth, and wave type; either internal or external on the crushing characteristics were also investigated. To experimentally create corrugation to validate the numerical results, a set of steel mandrel and matrix along with press machines were used. Since the initial specimens were brittle, they were subjected to heat treatment and annealing to gain the required ductility for forming with mandrel and matrix. The annealing of aluminum shells resulted in a 76%increase in ultimate strain and a 60% and 56% decrease in yield and ultimate stresses, respectively. The results showed that with increasing half-wave height in wavy square absorbers, the maximum force was first reduced and then increased. It was also found that in the specimen with constant diameter and half-wave depth, an increment in the half-wave height led to an initial increase in efficiency, followed by a decline. According to the conducted investigations, the lowe maximum force can be observed in the specimen with zero half-wave depth as compared to those having a depth of 1 cm.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.917-923
• /
• 2014

휴대폰과 같은 전자제품의 소형화로 체결 부품도 소형화가 요구된다. 초소형 볼트의 머리부분 두께 감소 요구에 따라 체결시 볼트 머리부 파손으로 충분한 체결력을 확보하는데 어려움이 있다. 본 연구에서는 볼트 깊이에 따른 체결 토크를 해석적으로 예측하여 비트 형상 설계에 활용하고자 한다. 볼트 머리부는 주로 전단 파손이 발생하기 때문에, 볼트용 선재의 전단 실험을 통하여 파손 기준을 설정하였다. 그리고, 설정된 전단파손 기준을 바탕으로 체결시 파손 형상과 최대 체결 토크를 예측하였다. 또한, 머리부에 성형되는 비트의 깊이에 따른 최대 체결토크을 예측하였다. 비트 깊이가 깊을수록 볼트 머리와 나사부의 경계에서 응력 집중으로 파손이 빨리 발생하고, 최대 체결 토크도 작아짐을 알 수 있었다.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.39-44
• /
• 2005

적점토 60 wt%, 석탄회 20 wt%, 석분오니 20 wt%를 혼합하여 제작한 sheet 형태의 소지에 인덴트(indent)를 주고 건조방법, 파쇄방법, 성형방법을 변화시켜 1～5 mm 골재의 파쇄율을 알아보았다. 소지를 건조할 때 실내와 실외에서의 자연건조, 건조기건조, 마이크로웨이브(microwave)건조, 급속건조로 분류하여 비교실험 하였고, 파쇄방법은 볼밀 Ⅰ 파쇄, 볼밀 Ⅱ 파쇄, 낙하파쇄, 기계식 파쇄(롤러밀사용)법으로 변화를 주었다. 성형방법은 인덴트의 간격과 깊이를 변화시키면서 동시에 소지의 두께를 변화시켜 실험하였다. 건조방법에 의한 비교실험 결과는 210초까지 건조시킨 마이크로웨이브건조가 약 42%로. 파쇄방법에서는 볼밀 Ⅱ 파쇄법이 약 65 %로 가장 높은 파쇄율을 보였고, 성형방법에서는 인덴트의 깊이가 깊어질수록(3mm의 소지에서만), 소지의 두께가 증가할수록 크기가 Ф=5 mm보다 큰 골재의 수율은 감소했고 Ф=5 mm 이하인 골재의 수율은 증가했다. 각각의 실험 후 파쇄 된 1～5mm 골재의 aspect ratio를 비교해본 결과 3mm 두께의 소지를 급속건조법에 의해 건조하고 볼밀 Ⅱ법을 이용해 파쇄 한 경우 가장 균일한 골재의 모양으로 파쇄 되었음을 알 수 있었다.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.176-183
• /
• 2002

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper , Stripes of grooves of which width 48$\mu$m, depth 124$\mu$m , pitch 274$\mu$m was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6 nm Ra in grooving Si. Barrier ribs were farmed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waviness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.