• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2005.11a
• /
• pp.229-234
• /
• 2005

The purpose of this study is to analyze a Characteristics of block formation and commercialization of residential books commercial area along urban arteries on Teheran-ro in Seoul. 'Teheran-ro' is selected as a case site to analyze the characteristics of residential blocks commercial area along urban arteries. The study analyzes the characteristics of the street network and block formation in commercial area along arteries and rear residential blocks, and commercialization of residential blocks commercial area along urban arteries according to the characteristics of street network and block formation. The analysis about block formation progress about i ) a street network and block formation, ii ) the scale of blocks, iii) division of lots, iv) lots system. The analysis about commercialization of residential blocks commercial area progress about i) a street network and block formation, ii) a density of building, iii) a use of building

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.241-249
• /
• 1999

Soot particle temperatures in co-flow diffusion flames have been measured using a two-color pyrometry at the pressure of 0.2 MPa(2 atm). The measured soot particle temperatures along with the integrated soot volume fractions are analyzed to understand soot formation characteristics. At 0.2 MPa, the addition of small amount of air into ethylene do not change the soot particle temperature in soot formation regions. This result showed that the increase of soot formation with addition of air is mostly due to the chemical effect of the added air, such as the increased role of C3 chemistry during the early stage of soot inception process. The addition of sufficient air into ethylene, however, changes soot particle temperatures and the understanding of soot formation characteristics becomes complicated. Measured soot particle temperatures also showed that there is no significant temperature effect for the synergistic effect of ethylene/propane mixture on soot formation.

• Tribology and Lubricants
• /
• v.14 no.4
• /
• pp.108-113
• /
• 1998

In order to investigate the characteristics of top ring groove deposit formation in diesel engine, engine test and simulation test were performed. From component analysis of used oils sampled from actual running engines, soot content in engine oil was selected as a main parameter for evaluating oil degradation. Deposit formation is highly related to soot content in lubricating oils. And high soot content oil accelerates deposit formation even in low temperature region below 26$0^{\circ}C$. In low temperature region below 26$0^{\circ}C$, deposit formation rate is mainly affected by top ring groove temperature. However, in high temperature region above 26$0^{\circ}C$, deposit formation rate is affected by soot content as well as top ring groove temperature. Therefore, soot content as well as top ring groove temperature should be kept a certain level in order to prevent troubles due to carbon deposit formation.

• Journal of the Korean Society of Combustion
• /
• v.3 no.2
• /
• pp.29-40
• /
• 1998

Flame structures and NOx formation characteristics in the flame lets of coflow and counterflow diffusion flame are numerically studied. Calculations were carried out twice with the $C_2-Full$ and $C_2-Thermal$ Mechanism for each flame. Mixture fractions and scalar dissipation rates are used as the parameters to compare the flame let structures and NOx formation characteristics quantitatively. It was found that there is a similarity in flame temperature and stable species profiles except radical profiles between two flamelets. And there are some differences in NOx concentration and production rates. These results imply that the flow effects must be considered in calculations for NOx formation of turbulent flames using Laminar Flamelet Model.

• Journal of the Korean Ceramic Society
• /
• v.18 no.4
• /
• pp.262-268
• /
• 1981

Experimental investigation has been carried out to study the characteristics of the various grade limestones in Samtaesan formation with the fundamental test (mineral compostion, thermal decomposition and etc.) and intrinsic reactivity test. It was shown that belite formation in low grade limestones is faster than high grade limestone, but alite formation has a contrary.

• Journal of the Korean Geographical Society
• /
• v.35 no.1
• /
• pp.17-38
• /
• 2000

The marine terraces often offer come important clues to understand the topographic development during the Quaternary and the present landforms in korea. We examined the mechanism of the marine terraces formation along the coast from Samjung-Ri(community), Guryongpo-Eup(county) to Haseo-Ri, Yangnam-Myun(county), Gyungju-Si(city). Among the various but unique factors of the given coastal environment, which should contribute to the marine terraces formation together, we focused on five possible factors for the present stydy. Geologic difference in bedrocks, protrusion degree of coastiline, topological relief of sea-bottom, fluvial characteristics on land, and pattern of the waves appeared to act cooperatibely on the terrace formation of Southeastem coast in korea, while the fluvial characteristics seemed play a significant but localized role in it. Wide distribution of middle surfaces on the coast of Samjungri-Janggilri could be due to the concentration of the high waves and the weakness of the Tertiary volcanic rocks. For the sporadic distribution of the terraces on the coast of Gupungri-Gyewonri, it seemed attributable to the erosion -susceptible weak bedrock, the coastline of inner bay, shallow sea-bottom with the gentle relief, and other fluvial characteristics with the low divides. Together with the geologic difference in bedrock, other factors including protrusion degree of coast, topological relief of sea-bottom, and the transportation loads by the stream Daejongchon are believed to act cooperatively on the mechanism of the marine terraces formation on the coast of Duwonri-Upchonri.

• Journal of ILASS-Korea
• /
• v.22 no.2
• /
• pp.80-86
• /
• 2017

The soot formation characteristics of various alkane-based single fuel droplets were studied in this work. Also, This study was performed to provide the database of the soot behavior and formation of alkane-based single fuel droplet. The experimental conditions were set to 1.0 atm of ambient pressure ($P_{amb}$), 21% of oxygen concentration ($O_2$) and 79% of nitrogen concentration ($N_2$). Combustion and soot formation of single fuel droplet was visualized by visualization system with high speed camera. At the same time, ambient pressure, oxygen concentration and nitrogen concentration were maintained by ambient condition control system. Soot formation characteristics was analyzed and compared on the basis of intensity ratio ($I/I_0$) of background image. The results of toluene fuel droplet showed the largest soot generation. Soot volume fraction ($f_v$) was almost the same under the identical fuel types regardless of various initial droplet diameter ($d_0$) since thermophoretic flux was not much changed under the same ambient conditions.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.75-76
• /
• 2014

The present study has numerically investigated the effects of the oxidizer-side nitrogen dilution on the precise structure and NOx formation characteristics of the turbulent syngas nonpremixed flames. Eulerian particle flamelet model was used to predicted the NOx formation characteristics in the turbulent syngas swirling nonpremixed flames. Current numerical simulation was conducted for the syngas gas turbine combustor. Numericla results indicate that as the H2O portion is increased in diluent, the formation of NOx decreased effectively in turbulent syngas swirl nonpremixed flames.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.377-383
• /
• 1999

In this study, the behavior of frost formation according to surface characteristics in the fin-tube heat exchanger has been examined experimentally. The results show that the thickness of the frost which is attached to the hydrophilic heat exchanger becomes thin and the air pressure drop is smaller than that of bare aluminium heat exchanger However, the frost mass of hydrophilic heat exchanger is more than the bare one. Hence, high density frost is attached to hydrophilic heat exchanger. The sensible and latent heat flux of hydrophilic heat exchanger is bigger than that of bare one, but the increasing amount is very small and the improvement of thermal performance is also very small. The variation of fin-pitch of heat exchanger shows little influence on frost formation and hydrophilic heat exchanger loses its surface characteristics rapidly with increasing relative humidity.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.3
• /
• pp.165-181
• /
• 2016

This study looks into the Korean traditional costume formation and the thoughts of the Korean people that form the foundation of that Korean traditional costume formation. And the goal of this study is in linking the thoughts and formative characteristics reflected in the Korean traditional costume formation to the fractal geometry, in an attempt to reveal correlation between Korean traditional costume formation which have existed for thousands of years to contemporary science of the West. The fractal theory that appeared as the new paradigm of contemporary science displayed similarities with the traditional ideologies of Korea, and the fact that formation principles of fractal appear in the formation of Korean costume, formed based on the Korean ideologies, show magnanimous capacity of the traditional Korean culture. When we look at the concept of fractal, the word fractal refers to the structure in which the shape repeats, where small structure is similar to the whole structure in form in endlessly repeating structure. In other words, 'fractal' means a structure that geometrically untangles the concept of 'self-similarity' which possesses the same shape in parts and in whole, and its major characteristics include 'self-similarity', 'circularity' and 'repeatability'. Korean costumes were formed based on the Han-thoughts, with a structure that possesses parts within the whole and the whole within parts, in accordance with the self-similarity theory of 'fractal'. This study compared studied fractal phenomenon which appear in formation characteristics of Korean traditional costume, which were formed based on the Korean traditional ideology, in other words, Korean costume formation and formation principles of fractal geometry were compared studied.