• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.856-858
• /
• 2008

• Environmental Analysis Health and Toxicology
• /
• 제25권2호
• /
• pp.131-143
• /
• 2010

We performed the tests of acute and subchronic inhalation toxicity of methyl formate, which has limited toxicological data in spite of its widespread use and enhanced hazard consequent on its high volatility. The median lethal concentration ($LC_{50}$) was evaluated to be above 5,000ppm(12.27 mg/L). In the test with subchronic inhalation, there are no deaths, but with reduction of body weight, food intake, organ weight by exposure to 400 (0.98 mg/L) and 1,600 (3.92 mg/L) ppm, dose-dependently. There were statistical differences in some hematological and blood biochemical parameters as compared to control (e.g. neutrophile and lymphocyte in the 1,600 ppm group, calcium and A/G in 1,600 ppm group). Methyl formate under the exposure of 1,600 ppm showed the respiratory findings with nasal, it was confirmed that the chemical has respiratory hazard with 1,600 ppm inhalation exposure, induces nasal epithelial atrophy, olfactory cell degeneration/regeneration and the contraction of olfactory cells, etc. According to the notification with Ministry of Labor (No. 2009-68) for classification, labeling and MSDS of chemicals, it is suggested for methyl formate to be classified as category 4 in acute (10.0$4\leq20.0$ mg/L), category 2 (0.2$\leq$1.0 mg/L/6h, 90 days) in specific target organ-repeated exposure.

• 한국초지조사료학회지
• /
• 제17권2호
• /
• pp.187-198
• /
• 1997

This experiment was conducted to evaluate effects of wilting and additives on fermetation characteristics, quality and aerobic stability of silage of rye(Seca1e cereale L.) harvested at the early heading stage. Harvested rye was wilted or mixed with beet pulp and then treated with formic acid or lactic acid bacteria(LAB) inoculant. Treatments were consisted of direct cut(DC), wilted(WT), beet pulp added(BP), direct cut and formate applied(DF), wilted and formate applied(WF), beet pulp and formate applied(BF), direct cut and LAB inoculated(DL), beet pulp added and LAB inoculated(BL), and wilted and LAB inoculated(WL) silages. Afler 70 days of ensiling period, the silages were opened and exposed to air for 7 days, and the silages of opening day(0 day) were compared with the silages exposed to air for 7 days(7 day). 1. LAB inoculated rye silages(DL, WL, BL) lowered pH values effectively eom the third day of ensiling and showed most stable pattern of pH changes during the initial fermentation process. Direct cut and formate applied(DF), beet pulp and formate applied(BF) and beet pulp added(BP) silages were also effective in lowering pH from the seventh day thai direct cut treatment(DC). 2. pH was low below 3.7 in all treatments of 0 day. After 7-day period of aerobic exposure, DL and WL showed considerable increases in pH from 3.5 and 3.4 to 8.3 and 6.4, respectively. 3. Direct cut rye silages(DF, DC, DL) and beet pulp and formate treatment(BF) produced effluent of 121.2, 85.9, 80.3 and 34.2 mlkg, respectively and these were greater than others(P<0.01). Beet pulp retained 1.61 I/kg of effluent at the application rate of 50 kg/t in comparing BP with DC, and formate application increased the amount of effluent in comparing DF and BF with DC and BP, respectively(P<0.01). 4. Beet pulp and LAB treatment(B1) was highest in content of lactate as 3.1% and formate treated silages(DF, WF, BF) showed lower content of lactate and total acid than others. LAB inoculated(D1, WL, BL) and wilted (WT) silages were graded to be good quality as a second group by the Flieg's score. Formate applied silages (DF, WF, BF) were graded as a foum group lower than DC by one. 5. Residual content of WSC of rye silage was higher in BP, BF, DL and BL than direct cut treatment(M3) (P< 0.01). Formate application had a tendency to increase the content of residual content of WSC. 6. For the ratio of NH3-N to Total N, wilted and LAB inoculated(W1) and direct cut and LAB inoculated(D1) silages were lowest on 0 day as 8.9 and 9.3% respectively. But after 7-day period of aerobic exposure, WL and DL showed largest increase of the ratio of $NH_3-N$ to Total N from 0 day(P<0.01). 7. On 0 day wilted(WT), beet pulp and formate treatment(BF), and beet pulp and LAB treatment(B1) were lower than direct cut treatment(DC) for NDF and ADF concentrations consistently. Formate applied silages (DF, WF, BF) made little change in ADF and NDF concentrations during 7 day period of aerobic exposure. DL and WL showed a large increase in ADF and NDF concentrations under aerobic condition(P<0.01). 8. IVDMD values of wilted(WT), beet pulp added(BP), wilted and LAB inoculated(W1) and beet pulp added and LAB inoculated(B1) silages were higher than direct-cut treatmentPC) as 84.7, 84.7, 84.4 and 83.0%, respectively on 0 day. But during 7-day period of aerobic exposure, a great decreae in IVDMD of WL was showed(P<0.01). The experimental results indicate that wilted silage(WT) could be recommended as the most effective treatment for reducing efluent and increasing quality and feed value of rye silage without deteriorating aerobic stability more than direct cut treatment(DC). Additionally, under unfavorable weather condition beet pulp added and LAB inoculated treatment(T3L) might be the possible alternative for successful ensiling of forage rye.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권5호
• /
• pp.49-55
• /
• 2012

A 1.28 L-batch reactor and continuous-flow stirred tank reactor (CFSTR) fed with formate and trichloroethene (TCE) were operated for 120 days and 56 days, respectively, to study the effect of formate as electron donor on anaerobic reductive dechlorination (ARD) of TCE to cis-1,2-dichloroethylene (c-DCE), vinyl chloride (VC), and ethylene (ETH). In batch reactor, injected 60 ${\mu}mol$ TCE was completely degraded in the presence of 20% hydrogen gas ($H_2$) in less than 8 days by anaerobic dechlorination mixed-culture (300 mg-soluble protein), Evanite Culture with ability to completely degrade tetrachloroethene (PCE) and -TCE to ETH under anaerobic conditions. Once the formate was used as electron donor instead of hydrogen gas in batch or chemostat system, the TCE-dechlorination rate decreased and acetate production rate increased. It indicates that the concentration of hydrogen produced in both systems is possibly more close to threshold for homoacetogenesis process. Soluble protein concentration of Evanite culture during the batch test increased from 300 mg to 688 mg for 120 days. Through the protein monitoring, we confirmed an increase of microbial population during the reactor operation. In CFSTR test, TCE was fed continuously at 9.9 ppm (75.38 ${\mu}mol/L$) and the influent formate feed concentration increased stepwise from 1.3 mmol/L to 14.3 mmol/L. Injected TCE was accumulated at 18 days of HRT, but TCE was completely degraded at 36 days of HRT without accumulation of the injected-TCE during the left of experiment period, getting $H_2$ from fermentative hydrogen production of injected formate. Although c-DCE was also accumulated for 23 days after beginning of CFSTR operation, it reached steady-state in the presence of excessive formate. We also evaluated microbial dynamic of the culture at different chemical state in the reactor by DGGE (denaturing gradient gel electrophoresis).

• Ocean and Polar Research
• /
• 제39권4호
• /
• pp.269-277
• /
• 2017

Medium compositions for the hyperthermophilic archaeon, Thermococcus onnurineus NA1 was statistically optimized to enhance formate-driven hydrogen ($H_2$) production by using response surface methodology. From the Plackett-Burman design-based experiment, it was confirmed that among the minor components of medium such as KCl, $MgSO_4$, $NH_4Cl$, Cystein-HCl, trace elements, Fe-EDTA and $CaCl_2$, the trace elements were screened as the only positively effective components with respect to $H_2$ production. Subsequently, the optimal concentrations of the trace elements and the major components of a medium such as NaCl, yeast extract and sodium formate were determined from the five-level central composite design (CCD)-based experiment. The resulting quadratic model predicted the maximum $H_2$ production of 46.6 mmol/L in serum bottle and it was validated experimentally using the optimal medium initially supplemented with 26.70 g/L of NaCl, 9.81 g/L of sodium formate, 3.50 g/L of yeast extract and 4.59 mL/L of trace elements. From the duplicate batch cultivations in the fermentor using the optimized medium, the a maximum $H_2$ production rate up to 71.8 mmol/L/h could be obtained, which was a 65% enhanced value compared with that obtained using the control medium, showing the high efficiency of the optimized medium.

• 한국토양비료학회지
• /
• 제39권2호
• /
• pp.80-85
• /
• 2006

The foliar injuries and absorption rates of calcium compounds in tomato (Lycopersicon esculentum cv. momotaro) and citrus [Shiranuhi(C. Marc. ${\time}C$. sinensis Osbeck)${\time}C$. reticulata Blanco)] were investigated. 0.3, 0.5 and 1.0% of $CaCl_2$, $Ca(NO_3)_2$, $Ca(H_2PO_4)_2$, Ca-EDTA, Ca formate or Ca acetate solution were applied to the leaves of tomato and citrus. The leaf burns were observed only in the foliar applications of Ca-EDTA and $Ca(H_2PO_4)_2$. Ca-EDTA exhibited more serious foliar injury than CaH2PO4. As applied with $^{45}CaCl_2$, $^{45}Ca(NO_3)_2$, $^{45}Ca$ formate or $^{45}Ca$ acetate, the rates of Ca absorptions by tomato and citrus leaves for 7 days were 17 to 32% and 6.6 to 46%, respectively. It meant that the absorption was differently influenced on calcium compounds. In tomato, the order of Ca foliar absorption was $Ca(NO_3)_2$ > Ca formate = $CaCl_2$ > Ca acetate. Although there was no difference in Ca absorption between the adaxial and abaxial parts of tomato leaves, total absorption was greater in expanded leaves than in expanding ones. On the other hand, in citrus Ca foliar absorption from $Ca(NO_3)_2$ or Ca formate was more active than that from $CaCl_2$ or Ca acetate. In conclusion, $Ca(NO_3)_2$ and Ca formate are recommended for the foliar application of Ca in tomato and citrus in order to increase absorption of Ca into their leaves.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.588-588
• /
• 2005

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1444-1446
• /
• 1998

Direct writing of copper lines has been achieved by pyrolytic decomposition of copper formate films using a focused argon ion laser beam($\lambda$ =514.5nm) on a glass. The thickness and linewidth of the deposited copper films were considered as a function of laser power and scan speed. As the result from AES, there are no other elements except for copper after decomposition in the atmospheric ambient.

• Bulletin of the Korean Chemical Society
• /
• 제35권1호
• /
• pp.147-150
• /
• 2014

Copper ink has been prepared by mixing copper(II) formate and 2-ethyl-1-hexylammonium bicarbonate (EHABC) to overcome some weak points such as aggregation and degradation of copper nano-type ink. Ink was coated on glass substrate and calcined at $110^{\circ}C$ to $150^{\circ}C$ to generate electrically conductive copper film under two different atmospheres such as nitrogen gas and gaseous mixture of formic acid and methanol. The lowest resistivity of $1.88{\mu}{\Omega}{\cdot}cm$ of copper film was obtained at $150^{\circ}C$ in gaseous formic acid condition. The long-term resistivity shows to increase from $1.88{\mu}{\Omega}{\cdot}cm$ to $2.61{\mu}{\Omega}{\cdot}cm$ after one month.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1998년도 학술발표대회 논문집 제5권
• /
• pp.35-39
• /
• 1998

Methyl과 ethyl formate의 초음파 흡수계수를 0.15-2 MHz의 주파수 범위, 온도 5-3$0^{\circ}C$에 걸쳐 1MHz 이하에서 정확한 초음파 흡수측정이 가능한 광 회절 초음파 공명법을 이용하여 측정하였다.그 결과, cisdhk trans 에 의한 초음파 완화 현상은 전형적인 단일 완화현상을 보였고, 그 스페트럼으로부터 완화주파수와 완화강도를 결정할 수 있었다. 완화 주파수와 완화강도의 온도 의존성으로부터 활성화 에너지(ΔH#)와 에너지 차(ΔH)를 구하였다. 측정된 methyl과 ethyl formate의 활성화 에너지는 각각 9.8과 8.9kcal/mol 이었고, 에너지 차는 각각 2.3 과 2.2kcal/mol로 나타났다