• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1196-1198
• /
• 2005

This paper presents the realization of a four-terminal floating nullor (FTFN), which is simple configuration comprised three OTAs. The external bias currents of the OTAs can electronically adjust the current gain of the proposed FTFN. The realization method is suitable for implementation in monolithic integrated form. To demonstrate the circuit performances, the proposed FTFN was simulated by the use of the PSPICE analog simulation program and implemented using the commercially available OTAs. The simulation and experimental results verifying the performances of the proposed circuit are agreed with the theoretical values. Some application example in the design of the proposed FTFN as electronically tunable active element are also included.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1254-1258
• /
• 2004

This paper presents of position control of Permanent Magnet Synchronous Motor (PMSM) the implementation with Field Programmable Gate Array (FPGA) is proposed. Cascade control with inner loop as a current control and an outer loop as a position control is chosen for simplicity and fast response. FPGA is a single chip (single processing unit), which will perform the following tasks: receive and convert control signal, create a reference current signal, control current and create switch signal and act as position controller in a addition of zero form. The 10 kHz sampling frequency and 25 bit of floating point data are defined in this implementation.The experimental results show that the performance of FPGA based position control is comparable with the hardware based position control, with the advantage of control algorithm flexibility

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.3
• /
• pp.33-40
• /
• 2013

The rural traditional houses in Taebaek mountainous regions play important roles in figuring out values and social aspects of past time including housing life. But due to the introduction of convenient facilities in the current housing life style after industrialized society, many transformations have been taken place even to exist rural traditional folk houses such as installation of new equipment and furniture, the arrangement and function change of rooms, expansion of residential area and etc. So this study aims to secure basic data to prepare installation standard of the convenient facilities as examining convenience facility installation status of the cultural asset designated as rural traditional house, and to identify the meaning and usage of major room of rural traditional houses in order to prepare the proper balances between its original form preservation and residents' convenience living.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.255-266
• /
• 2008

The current paper presents application of a new analytic solution in general relative motion to spacecraft formation flying in an elliptic orbit. The calculus of variations is used to analytically find optimal trajectories and controls for the given problem. The inverse of the fundamental matrix associated with the dynamic equations is not required for the solution in the current study. It is verified that the optimal thrust vector is a function of the fundamental matrix of the given state equations. The cost function and the state vector during the reconfiguration can be analytically obtained as well. The results predict the form of optimal solutions in advance without having to solve the problem. Numerical simulation shows the brevity and the accuracy of the general analytic solutions developed in the current paper.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.117-118
• /
• 2014

The unfloored space and floor is one of characteristic of traditional house in Korea. This space is used to connecting passage between room or entrance of house. Currently, according to decline of heat insulation property thereby becoming decrepit house, native is repairing it for block external environment such as rain, wind and so on. But, variety problem is happening from wrong repair. This object of this study is current status and analysis on problem of unfloored space and floor repair. As a result, current status of repair is classified repair type, installation position and using form. And position of problem is confirmed connection between original house and extend space.

• Journal of Plant Biology
• /
• v.37 no.2
• /
• pp.159-166
• /
• 1994

Direct current (DC) applied to cotyledons during a 16 h inductive dark period inhibited the flowering in the short-day plant, Pharbitis nil Choisy cv. Violet. The inhibitory effect of DC was more profound when the current flowed from roots to cotyledons, showing its polarity-dependent action. The second half on the inductive dark period was more sensitive to DC stimulus. The flowering was significantly depressed only when DC stimuli were applied to the translocation path of the floral stimulus from the induced cotyledon to the apex, suggesting that the transport of floral stimulus was damaged by the DC treatment. The vegetative apex culture bioassay system showed that a significant level of the floral stimulus activity existed in the phloem exudate from the cotyledons which would fail to form their own floral buds. These results strongly support the hypothesis that DC partially impede, at least temporarily, the transmission path of the floral stimulus from florally-induced cotyledon to the apex, rather than depressing in situ synthesis of the floral stimulus.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.3
• /
• pp.167-172
• /
• 1999

The device characteristics of the base resistance controlled thyristor with self-align corrugated p-base is demonstrated for the first time with varying the n+ cathode width and the temperature form room temperature to $125^{\circ}C$. The experimental results show that the snap-back in the CB-BRT is significantly suppressed irrespective of the various n+ cathode width and the temperature as compared with that of the conventional BRT. The maximum controllable current of the CB-BRT is uniformly higher when compared with that of the conventional BRT over the temperature range from room temperature to $125^{\circ}C$.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1036-1038
• /
• 2003

Electric control of eddy coupling offers many new possibilities in process control and other industrial control applications. And a form of speed control for the load is affected for a system driven by costant frequency induction motor. This paper compare speed-torque characteristic of three types of eddy-current coupling by using the analytical method. And characteristic experiment of three types of eddy current coupling is put into operation. And then, this paper will discuss operational and magnetic field characteristic of three types model.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.118-121
• /
• 1991

The characteristics of magnetizing system considering the anisotropy and the nonlinearity are analyrized using PEM in This paper. The case of magnetizing the ferrite magnet with 12 poles is analyrized. The anisotropy characteristic is considered when ferrite magnet which is widely used as permanent magnet is magnetized. The Nonlinear characteristic of magnetizing yoke aid ferrite is considered because the current is in the saturation region. When the magnetizing current value is over the optimum value, the magnet is magnetized with 24 poles. This is not the case of our expectation. Thus, for the case of our expected magnetizing form, it is the conclusion that the optimum magnetizing current value is selected.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2073-2074
• /
• 2011

In this study, an algorithm for diagnosis of dc motor with winding open fault is suggested. A dc motor used in this paper, is consisted of a permanent magnet field stator, double 16-turn series winding rotating armature with 12-slot, brush and 12-commutator, etc. A current signal of dc motor which has brushes and commutatorswas considered for fault diagnosis. By commutation, this current signal shows different wave form according to the fault condition of the motor. In this study, operation of the data was easily through simplification of the current signal by the signal processing. Computation method is presented reference value($C_{dv}$) for diagnosis of winding open fault and verified through experiments that can be diagnosed using the reference value($C_{dv}$).