• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.1
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2041-2043
• /
• 2013

A layered perovskite of Dion-Jacobson phase, $RbLaTa_2O_7$, was successfully exfoliated into colloidal suspension via successive ion-exchange and intercalation reaction. The pristine perovskite $RbLaTa_2O_7$ was synthesized by conventional solid-state reaction, and then, it was ion-exchanged with hydrochloric acid to obtain a protonic form of perovskite. The resulting proton-exchanged perovskite was reacted with ethylamine to increase interlayer spaces for further intercalation reaction. Finally, the ethylamine-intercalated form was exfoliated into nanosheets via an intercalation of bulky organic cations (tetrabutylammonium). According to X-ray diffraction (XRD) analysis, the TBA-intercalated form showed remarkably increased interlayer spacing (${\Delta}d$ = 1.67 nm) in comparison with that of the pristine material. Transmission electron microscopic image of exfoliated perovskite clearly revealed that the present exfoliated perovskite were composed of very thin layers. This exfoliated perovskite nanosheets could be applicable as building blocks for fabricating functional nanocomposites.

• Korean Institute of Interior Design Journal
• /
• v.14 no.2 s.49
• /
• pp.104-111
• /
• 2005

Environment problem has proposed in the world at large, the desire for environment conservation and one's value change which lay emphasis on lasting human sensibility are increasing. Constant human mind and ecology centered in space is presenting as future space design substitute plan which is based on fundamental material quality in the space such as environment and human ,naturalist or Green Design, pro-environment construction, sense design and etc. So, we intend to anthropocentric value and get out of satisfaction of function as the past physical environment equipment which is applied the elements of ecology based on the organized body and interaction with human. A form of sensitive space is divided into sentient space, expressing method and material, change of space according to the flow of time, and is expressed in a more segmented form of sensuality by being replaced into a new sensitive space through transaction with human, who occupy within the space. The space embodiment which is satisfied human sense regards as alternative plan intention for the future, through two subjects relativity between the elements of ecology and sense, we will find the influence of sense as each space trait of the elements of ecology, examine sense form in the space with the synthetic summary. It is significant presentation for the lasting space based on anthropocentric delightfulness as the design which moves human mind while designing the space for this pattern of sense space.

• Journal of the Korean Society of Costume
• /
• v.59 no.10
• /
• pp.151-171
• /
• 2009

The purpose of this study is to analyze the formative relationship between clothes and hat with the works by Philip Treacy, the designer who raised hats to one of important fashion accessories. The method to analyze the relationship between clothes and hats was the formative analysis by Marian L. Davis and Marilyn R. Delong. The results suggest that clothes and hat had an organic relationship, and a hat style was changed with formative elements of clothes. Clothes and hats by Philip Treacy were analysed in the aspects of Form, Color, Material, and Decoration. As a result, hats by Philip Treacy were mainly designed by the relationship between whole types without a closed line and showed geometric and formative forms, similarly harmonized with clothes. To highlight hats, the achromatic colors such as black and gray were used. Besides clothes and hats were coordinated by the same colors, but contrary colors were used to express a strong image. Felt or straw materials maily used to express a formative and fixed form were well matched with smooth, opaque, and lusterless materials such as wool. Also when transparent materials were used for hats, lace was used for clothes. A hat made of acrylic was matched with clothes made of glossy vinyl coating materials. Decoration was mainly removed but if used, feather decoration was added to clothes.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.188-191
• /
• 2005

Two different coverlayers which is useful for an optical buffer and a mechanical protection made of not only UV resin but also polycarbonate coversheet were prepared on small form factor optical disks. Thin coverlayer of 10 ${\mu}m$ and thick coverlayer of 80 ${\mu}m$ were fabricated. 10 ${\mu}m$-thick coverlayer was coated using UV resin material by spin coating method for the flying optical head application. On the other hand, 80 ${\mu}m$-thick coverlayer using coversheet with the resin bonding material was prepared for the non-flying optical head application. Both cases, the thickness uniformity seem to be the primary prerequisite factor, and it was analyzed. Thickness of 10 ${\mu}m$-thick UV resin coverlayer could be controlled within ${\pm}0.2m$ range and 80 ${\mu}m$-thick coversheet could be controlled within ${\pm}3{\mu}m$ range. However, the yield of such thickness tolerance was not good. New design of metal housing holder and polycarbonate outer ring was adopted to diminish the ski-jump phenomenon. Specifically, the polycarbonate outer ring was very effective to reduce the ski-jump. However, it should be careful to maintain uniform edge between disk and ring for the perfect coverlayer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.8
• /
• pp.720-725
• /
• 2007

This study investigated the pressing conditions in the molding of aspheric glass lenses for the mega pixel phone camera module using the DOE method. Tungsten carbide (WC; Japan, Everloy Co., 002K),which contained 0.5 w% cobalt (Co), was used to build the mold. The mold surface was ultra-precision ground and polished, and its form accuracy (PV) was 0.85um in aspheric surface. We selected four factors, pressing temperature, force and time of first step, and force of second step, respectively, as the parameters of the pressing process. in order to reduce the number of experiments, we applied fractional factorial design considering the main effects and two-way interactions. The analysis results indicate that the only two main effects, the pressing temperature and the time of pressing step 1, are available for the form accuracy (PV) of the molded lens. The analysis results indicated that the best combination of the factors for lowering the form accuracy(PV) value of molded lens was to have them at their low levels.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.202-205
• /
• 1995

Developed controller is the part of deflection yoke winding machine which controls the power to form the deflection yoke coil into desired shape after winding. So as to form the deflection yoke coil, it is needed to melt the bonding material which is spreaded on the coil. The heat melt the bonding material which is produced by flowing the current through the winded coil. Therefore, at first it is needed to peel off the enamel from the winded coil so as to flow the current, and then supply the power to produce the heat which form the winded coil into desired shape. Naturally developed controller is composed of the peeling part and the conduction and forming part. All of them consist of the inverter structure and control the output current. The peeling is achieved by low voltage and high AC current, the conduction and forming is by DC current. Developed controller also has a function that detect the resistance of the deflection yoke coil to prevent the damage of the load which is produced by poor peeling.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.289-297
• /
• 2006

This study was begun on the premise that architecture which has the definite disposition for survival even in the urban, social structure of that uncertainty and constructs specialty is biomorphic architecture. This study was made with the following four specific purposes largely. First, through the theoretical investigation of biomorphic architecture that appears in the tendency that mordern architecture develops into the architecture of do-stereotype and new form, its meaning and definition are examined. Second, the analysis of biomorphic architecture is investigated and the generation causes are applied architecturally and generate biomorphic architecture is made. Third, by analyzing the material expression characteristics of biomorphic architecture, the meaning and possibility of architecture, which expresses the vitality of organism, as the material expression characteristics of biomorphic architecture, are investigated. The material expression characteristics was deduced through the generation background of biomorphic architecture. The material expression characteristics of biomorphic architecture is the various modeling by smart-network and the response system of sensitivity poly-logue.

• Structural Engineering and Mechanics
• /
• v.25 no.4
• /
• pp.423-444
• /
• 2007

By using the incremental form of the endochronic theory of plasticity, a model of material function is proposed in this paper to investigate plastic behavior. By comparing the stress-strain hysteresis loop, the theory is shown to agree well with the experimental results, especially in the evolution of peak stress values of SAE 4340 steel loaded by cyclic loading with various amplitudes. Depending on the choice of material parameters, the present model can substantially result in six categories of material function, each of which can behave differently with respect to an identical deformation history. In addition, the present model of material function is shown to be capable of describing the behavior of erasure of memory of materials, as experimentally observed by Lamba and Sidebottom (1978).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.57-64
• /
• 1994

This study investigates the costumes of the Most Reverend Priest, which shows a portrait of the Buddhist monk in Koryo dynasty, owned by SONG KWANG Temple. A surplice and a long sleeved Buddhist robe was chiefly shown up a portrait of a Buddhist monk. The purpose of this study find out the color, form, pattern, material, adornment of the costumes which is appeared a portrait, and also seek to changing process according to the times. the finding in this paper are ; * A surplice - color : red, green, yellow etc. form' big size surplice, provision surplice. pattern : no. material : unstriated silk. adornment' bolt, ribbon. * A long sleeved Buddhist robe- color : grey, blue, dark blue, pink, green, chestnut .etc. pattern : no. In comparison with a survery of previous studies of Buddhist comstumes, the color and type of the Koryo dynasty are more brilliant various color. In other words, the social status of monk in the Koryo is higher than present day.