1 |
Basuroychowdhury, I.N. and Voyiadjis, G.Z. (1998), 'A multiaxial cyclic plasticity model for nonproportional loading cases', Int. J. Plasticity, 14, 855-870
DOI
ScienceOn
|
2 |
Beaudoin, A.J., Dawson, P.R., Mathur, K.K., Kocks, U.F. and Korzekwa, D.A. (1991), 'Application of polycrystalline plasticity to sheet forming', Comp. Math. Appl. Mech. Eng., 117, 49-70
|
3 |
Cailletaud, G. (1984), 'Some elements on multiaxial behavior of 316L stainless steel at room temperature', Mech. Mater, 3, 333-345
DOI
ScienceOn
|
4 |
Calloch, S. and Marquis, D. (1997), 'Additional hardening due to tension-torsion nonproportional loadings: influence of the loading shape; multiaxial fatigue and deformation testing techniques', In: Kalluri, S., Bonacuse, P.J.(Eds.) ASTM STP 1280. American Society for Testing and Materials, 113-130
|
5 |
Chang, K.C. and Lee, G.C. (1986), 'Biaxial properties of structural steel under nonproportional loading', J. Eng. Mech., 112, 792-805
DOI
ScienceOn
|
6 |
Dafalias,Y.F. and Aifantis, E.C. (1990), 'On the microscopic origin of the plastic spin', Acta Mech., 82, 31-48
DOI
|
7 |
Dafalias, Y.F. and Popov, E.P. (1976), 'Plastic internal variables formalism of plasticity', J. Appl. Mech., 43, 645-651
DOI
|
8 |
Ellyin, F. and Wolodko, J.D. (1997), 'Testing facilities for multiaxial loading of tubular specimens, multiaxial fatigue and deformation testing techniques', ASTM STP 1280, S. Kalluri and P.J. Bonacuse, Eds., ASTM, 724
|
9 |
Hopperstad, O.S., Langseth, M. and Remseth, S. (1995a), 'Cyclic stress-strain behaviour of alloy AA6060 T4, Part I: Biaxial experiments and modeling', Int. J. Plasticity, 11, 725-739
DOI
ScienceOn
|
10 |
Krempl, E. and Lu, H. (1984), 'The hardening and rate dependent behavior of fully annealed AISI type 304 stainless steel under biaxial in-phase and out-of-phase strain cycling at room temperature', J. Eng. Mater. Technol., 106, 376-384
DOI
ScienceOn
|
11 |
Krieg, R.D. (1975), 'A practical two surface plasticity theory', J. Appl. Mech., 42, 641-646
DOI
|
12 |
Kwofie, S. (2003), 'Description of cyclic hysteresis behavior based on one-parameter model', Maters. Sci. Eng., A357, 86-93
|
13 |
Lamba, H.S. and Siderbottom, O.M. (1978), 'Cyclic plasticity for nonproportional path: Part 1: Cyclic hardening, erasure of memory, and subsequent strain hardening experiments', J. Eng. Mater. Technol, 100, 96-103
DOI
ScienceOn
|
14 |
Miehe, C., Schotte, J. and Schroder, J. (1999), 'Computational micro-macro transitions and overall moduli in the analysis of polycrystals at large strains', Comput. Mat. Sci., 16, 372-382
DOI
ScienceOn
|
15 |
Murakami, H. and Read, H.E. (1989), 'A second-order numerical scheme for integrating the endochronic plasticity equations', Comput. Struct., 31, 663-672
DOI
ScienceOn
|
16 |
Ning, J. and Aifantis, E.C. (1996), 'Anisotropic yield and plastic flow of polycrystalline solids', Int. J. Plasticity, 12, 1221-1240
DOI
ScienceOn
|
17 |
Pan, W.F. and Chern, C.H. (1997), 'Endochronic description for viscoplastic behavior of materials under multiaxial loading', Int. J. Solids Struct., 34, 2131-2160
DOI
ScienceOn
|
18 |
Pan, W.F. and Chiang, W.J. (1999), 'Endochronic analysis for rate-dependent elasto-plastic deformation', Int. J. Solids Struct., 36, 3215-3237
DOI
ScienceOn
|
19 |
Samson, Y., Hong S.G. and Lee, S.B. (2004), 'Phenomenological description of cyclic deformation using the overlay model', Mater. Sci. Eng., A364, 17-26
|
20 |
Rivlin, R.S. (1981), 'Some comments on the endochronic theory of plasticity', Int. J. Solids Struct., 17, 231-248
DOI
ScienceOn
|
21 |
Sandler, I.S. (1978), 'On the uniqueness and stability of endochronic theories of material behavior', J. Appl. Mech., 45, 263-266
DOI
ScienceOn
|
22 |
Shiao, Y.P. (2000), 'A study on multi axial cyclic loading and anisotropic plasticity of structural metals', Ph.D. Thesis, National Taiwan University, Dept. of C.E
|
23 |
Tanaka, E., Murakami, S. and Ooka, M. (1985b), 'Effects of plastic strain amplitudes on non-proportional cyclic plasticity', Acta Mech., 57, 167-192
DOI
|
24 |
Valanis, K.C. (1971), 'A theory of viscoplasticity without a yield surface, Part I: General theory', Arch. Mech., 23, 517-551
|
25 |
Valanis, K.C. (1980), 'Fundamental consequence of a new intrinsic time measure-plasticity as a limit of the endochronic theory', Arch. Mech., 32, 171-191
|
26 |
Valanis, K.C. and Fan, J. (1983), 'Endochronic analysis of cyclic elastoplastic strain fields in a notch plate', J. Appl. Mech., ASME, 50, 789-794
DOI
|
27 |
Valanis, K.C. (1984), 'Continuum foundations of endochronic plasticity', J. Eng. Mater. Technol., 106, 367-375
DOI
ScienceOn
|
28 |
Watanabe, O. and Atluri, S.N. (1986), 'Constitutive modeling of cyclic plasticity and creep, using an internal time concept', Int. J. Plasticity, 2, 107-134
DOI
ScienceOn
|
29 |
Wu, H.C. and Yip, M.C. (1981), 'Endochronic description of cyclic hardening behavior of metallic material', J. Eng. Mater. Technol, 103, 212-217
DOI
ScienceOn
|
30 |
Yeh, W.C. (1995), 'Verification of the endochronic theory of plasticity under biaxial load', J. the Chinese Institute of Engineers, 18(1), 25-34
DOI
|
31 |
Yeh, W.C., Ho, C.D. and Pan, W.F. (1996), 'An endochronic theory accounting for deformation induced anisotropy', Int. J. Plasticity, 12, 987-1004
DOI
ScienceOn
|
32 |
Tanaka, E., Murakami, S. and Ooka, M. (1985a), 'Effects of strain path shapes on non-proportional cyclic plasticity', J. Mech. Phys. Solids, 33(6), 559-575
DOI
ScienceOn
|
33 |
Wu, H.C., Yao, J.C. and Chu, S.C. (1986), 'Investigation of endochronic constitutive equation subject to plastic strain-controlled axial-torsional deformation', J. Eng. Mater. Technol, 108, 262-269
DOI
ScienceOn
|
34 |
Hopperstad, O.S., Langseth, M. and Remseth, S. (1995b), 'Cyclic stress-strain behaviour of alloy AA6060 T4, Part II: Biaxial experiments and modeling', Int. J. Plasticity, 11, 741-762
DOI
ScienceOn
|
35 |
Yeh, W.C., Cheng, J.Y. and Her, R.S. (1994), 'Analysis of plastic behavior to cyclically uniaxial tests using an endochronic approach', J. Eng. Mater. Technol, ASME, 116, 62-67
DOI
ScienceOn
|
36 |
Diard, O., Leclercq, S., Rousselier, G and Cailletaud, G. (2005), 'Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity: Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries', Int. J. Plasticity, 21, 691-722
DOI
ScienceOn
|
37 |
Mroz, Z. (1967), 'On the description of anisotropic workhardening', J. Mech. Phys. Solids, 15, 163-175
DOI
ScienceOn
|