• Tribology and Lubricants
• /
• 제19권5호
• /
• pp.292-297
• /
• 2003

The fundamental fluid mechanics associated with the rotation of a smooth plane disk enclosed within a cylindrical chamber have been studied experimentally. In order to acquire systematic information pertinent to this problem torque and friction loss data were obtained over a wide range of disk Reynolds numbers for axial clearance-disk radius ratio H/R from 0.025 to 0.2 and radial tip gap-disk radius ratio s/R from 0.021 to 0.105. Loss analysis of hard disk drive (HDD) is presented to describe the contribution of windage loss of a rotating disk. The minimum loss form factor of HDD can be obtained from this analysis at each operation conditions.

• 전자공학회논문지D
• /
• 제34D권7호
• /
• pp.79-87
• /
• 1997

Untill now, the most well-known cofiguration for waveguide grating router(WGR) is composed of radiative star couplers and arrayed waveguide grating(AWG), which usually suffer form the rdiation loss of around 3dB or more. Therefore, te improved design of WGRs is needed to reduce the loss. In ths paper, we propose a novel WGR composed of multimode interference couplers which have good unifiormity, fabrication tolerance, and very low excess loss, and suggest the efficient algorithm to find the proper path length differences of AWG for given channel spacing and channel assignment to each output prot. The simulated spectral responses of the proposed WGR using the finite difference beam propagation method (BPM) show that the excess loss is less than 0.3dB and the crosstalk less than -25dB in case of 4x4 WGR, and the excess loss less than 0.4dB and the crosstalk less than -25dB in case of 8x8 WGR for all the channel wavelengths.

• 한국철도학회논문집
• /
• 제9권1호
• /
• pp.1-6
• /
• 2006

The purpose of this study is to calculate transmission loss of the high speed railway's wall section accurately. Transmission loss measurement of ideal case i.e. the wall in the laboratory condition was carried out in first, which results were compared with those by statistical energy method. Transmission loss values of high speed railway calculated out by experimental method are compared with those from closed form solution. Commercial statistical energy analysis was also used to predict the outside pressure level using those measured transmission loss values. Simple SEA model could estimate reasonable exterior sound pressure level.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.847-849
• /
• 1998

In this paper, we propose the generalized on-line economic dispatch algorithm including transmission loss. it was derived from the process developing matrix form of the classic ELD problem. it can rapidly calculate generation power using transmission loss and transmission loss sensitivity calculated from the result of power flow analysis. Transmission loss sensitivity ${\partial}P_{loss}/{\partial}P_G$ is derived using optimization technique.

• 한국패류학회지
• /
• 제24권2호
• /
• pp.131-136
• /
• 2008

피조개 부착치패의 중간양성시 생존율을 향상시키기 위하여 보호망의 형태 및 유실 방지망의 종류에 따른 부착치패의 성장 및 생존을 조사하였다. 보호망의 형태별로 60일간 중간양성한 부착치패의 성장은 노출형이 평균 각장 $12.8{\pm}3.2$ mm로 가장 빨랐으며(P<0.05), 통발형이 $12.2{\pm}3.5$ mm, 원통형이 $11.9{\pm}3.8$ mm, 직사각형이 $10.9{\pm}3.7$ mm순으로 큰 차이를 나타내지 않았다. 생존율은 통발형이 43.7%, 원통형이 41.2%, 직사각형이 31.6%로 보호망의 형태에 따라 통발형 및 원통형이 직사각형보다 높았으며, 노출형이 5.4%로 매우 낮았다(P<0.05). 유실 방지망 종류별로 163일간 중간양성한 부착치패의 성장은 차광막이 평균 각장 $13.9{\pm}3.1$ mm로 가장 빨랐고(P<0.05), 여자망이 $12.9{\pm}3.0$ mm, PE망이 $11.8{\pm}3.1$ mm 및 대조구가 $12.6{\pm}3.3$ mm 순으로 나타났으며, 생존율은 차광막이 91.5%, PB망이 90.1%, 여자망이 88.5%로 유의한 차이가 없었다. 그러나 유실 방지망을 설치하지 않은 대조구에서는 61.5%로 설치한 시험구보다 유의하게 낮았다(P<0.05). 피조개 부착치패의 중간양성시 보호망은 통발형 및 원통형을 사용하면 채묘망과 보호망 간의 공간이 확보되어 마찰에 의한 탈락을 방지하고, 해수의 소통이 원활하여 높은 생존율을 기대할 수 있을 것으로 판단된다. 그리고 보호망목의 크기는 2 mm 내외를 사용하여 해수의 유통이 비교적 원활히 되도록 하였으며, 일시적으로 탈락하는 개체의 유실을 방지하기 위하여 부착치패 채묘망과 직각으로 설치한 결과 높은 생존율을 보였다. 유실 방지망 종류별 중간양성시험 결과는 시험기간이 겨울철이여서 태풍 등의 영향을 전혀 받지 않았고, 보호망에 부착물질이 거의 없어 생존율이 매우 높았다. 겨울철 중간양성이 여름철 중간양성 보다 생존율에서는 월등히 높은 결과를 나타내어 산업화를 위해서는 유리할 것으로 추정되었다. 따라서 피조개 부착치패 중간양성 시기는 태풍 등의 위험한 시기를 피하여 조절하고, 피조개 부착치패의 중간양성시 통발형 및 원통형의 보호망과 유실 방지망을 병행하여 사용하면 높은 생존율을 기대할 수 있을 것으로 판단되었다.

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.135-142
• /
• 2001

This study is for the investigation of form using the aluminum-compound metal frame(Aluminum frame reinforced panel : AFR panel) which is improved in the capacity in the wall-concrete structure in steal of using the existing form which has problems such as, excessive exposure of cement, the loss of labor when it is constructed or disjointed, and it's economical efficiency compared with that of EURO Form. AFR panel passes the KS F 8006 test, and as a result of field test, it's displacement is satisfied with Specification. And using AFR panel is more economical than that of EURO Form because saving labor cost which plays a major part in cost saving in formwork is more effective in retrenching total cost than increment of material cost.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.12-13
• /
• 2013

Free-form building is increasing because of request that an order to raise the value and request of the local residents and the government trying to own iconic and beautiful buildings. In addition, the installation and production of free-form concrete segment are now available because of development of construction technology, such as the development of materials and equipment. However, the production of free-form concrete segment requires a lot of time and manpower than shaping. In particular, resources of the mold for the production of free-from segment will be invested excessively because mold can not be recycled. Thus, the problems of increased costs, construction periods and loss of productivity occur. To solve these problems, this study proposes a technique of making the mold of for variable within a short time. Technique proposed in this study can be recycled die and will realize fast and accurate free-form concrete segment.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.136-148
• /
• 1997

The present study has been carried out to develop a computational procedure for the analysis of the off-design performance in centrifugal compressors with vaneless diffusers by integrating empirical loss models and analytical equations. Losses in centrifugal compressors stem from a number of sources and their exact calculation is not yet possible. This study investigates several modeling schemes and shows that a fairly good prediction can be achieved by a proper selection of the most important flow parameters resulting form a meanline one-dimensional analysis. The performance maps for compressors are calculated and compared with measured performance maps. The off-design performance characteristics in terms of the pressure ratio vs. mass flow produced have generally correct forms. However, no universal means have been found to predict accurately the onset of surge. The prediction method developed through this study can serve as a tool to ensure good matching between parts and it can assist the understanding of the operational characteristics of general purpose centrifugal compressors.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.128-130
• /
• 2003

For electrical machine designers, core loss data are usually provided in the form of tables or curves of total loss versus flux density or frequency. The aim of this work is to propose a mathematical model for the iron losses prediction in soft magnetic material$ with any frequency and flux density. In this paper, three formulas for calculating the iron loss coefficients are discussed. And the coefficients are applied to calculate the iron loss of the 25kW high speed motor.

• Communications for Statistical Applications and Methods
• /
• 제9권3호
• /
• pp.889-898
• /
• 2002

In decision theoretic estimation, the loss function usually emphasizes precision of estimation. However, one may have interest in goodness of fit of the overall model as well as precision of estimation. From this viewpoint, Zellner(1994) proposed the balanced loss function which takes account of both "goodness of fit" and "precision of estimation". This paper considers estimation of the parameter of a Bernoulli distribution using Zellner's(1994) balanced loss function. It is shown that the sample mean $\overline{X}$, is admissible. More general results, concerning the admissibility of estimators of the form $a\overline{X}+b$ are also presented. Finally, minimax estimators and some numerical results are given at the end of paper,at the end of paper.