• 한국철도학회논문집
• /
• 제17권4호
• /
• pp.245-250
• /
• 2014

본 연구에서는 콘크리트 궤도 교량의 사용성 설계를 위한 연구로서 궤도 및 교량 설계변수들이 콘크리트 궤도의 레일지지점에서의 작용력에 미치는 영향을 나타내었다. 궤도 구조에 작용하는 작용력을 구하기 위해서 각 레일 지지점의 간격이 다른 부등간격 이산지지보 모델을 유도하였다. 해석 변수는 교량의 교대 또는 교각 위치 부근의 신축이음부의 레일 지지점의 간격, 교량 거더의 받침에서부터 교량 거더 단부측의 마지막 레일지 지점까지의 거리, 그리고 추가 배치한 레일지지점의 수이다. 궤도 구조의 변위를 일으키는 요인으로는 축하중, 거더의 단위 수직단차와 단부회전각이다. 해석결과로부터 레일지지점에서의 최대압축력과 최대부상력을 구하였으며 레일지지점의 간격이 작용력에 미치는 영향을 나타내었다.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1303-1313
• /
• 2013

본 연구에서는 콘크리트 슬래브 궤도를 가지는 교량의 사용성 검토에 있어 단위 축하중, 단위 수직 단차, 단위 회전에 의해 발생되는 레일 지지점의 작용력에 대한 기준 값을 구하였다. 해석방법에 있어서는 레일이 탄성 스프링에 의해 연속적으로 지지되는 모델과 이산적으로 지지되는 모델이 이용되었다. 해석결과 얻어진 레일 지지점에서의 작용력은 콘크리트 궤도의 사용성 검토에서 참조되고 있는 DS 804 기준에 제시된 값과 비교되였으며, 그 결과는 잘 일치하였다. 또한, 레일 지지점의 간격과 체결장치의 강성이 레일 지지점에서의 작용력에 미치는 영향을 분석하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1439-1449
• /
• 2007

The challenging aspect of CWR (continuous welded rail) is the additional axial forces in rails, mainly due to the thermal expansion of steel plate girder and rail itself. It has been found that these axial forces are proportional to girder length, total bridge length and bolt tightening forces. Also these forces are dependent to girder support conditions, types of bearings and their arrangements. With CWR, the authors' previous studies show that performance improvements like noise reduce, fatigue resistances and bearing durability increment can be expected. In addition to these effects, secondary effects due to the semi integral behavior between rail and bridge girder also can be expected. Special bearings which can reduce the absolute maximum axial forces have been developed, and applied to real 100m span bridge. The performance improvements were verified through site measurements and numerical analysis. The purpose of this study is to confirm the expected performance improvement aspects of steel plate girder bridges with CWR. To verify these aspects, girder stiffness changes, rail axial force changes, girder displacements and noise level were thoroughly measured and compared.

• 한국철도학회논문집
• /
• 제12권1호
• /
• pp.95-103
• /
• 2009

교대나 교각 위 교량 슬래브 단부의 변형은 궤도 틀림이나 유지보수의 주요 원인이 되고 있으며, 특히 콘크리트 슬래브궤도가 설치되는 경우에는 궤도구조의 강성과 교량 슬래브와의 일체 성으로 레일 및 지지구조의 사용성에 심각한 영향을 미치는 변형과 추가하중이 발생하게 된다. 이번 연구에서는 교량 슬래브 단부 변형으로 인해 발생하는 궤도구조의 사용성에 영향을 미치는 인자를 파악하고 매개변수 해석을 통해 변수 별 영향 정도를 파악하였다. 연구 결과 단경간교 보다 연속교가 레일 지지점 하중 감소에 유리하고, 마지막 레일 지지점과 교량받침 사이 간격, 교량받침 강성, 체결구 강성이 사용성에 큰 영향을 미치는 것으로 분석되었다.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.54-61
• /
• 2010

The additional axial force of CWR(continuous welded rail) is occurred by structure-track interaction, in reverse, fixed supports of structure are applied the large load by that. Ratio of load which transferred on support through the bridge superstructure with one-side REJ by acceleration and braking load are stated in High-Speed Rail Design Criteria(2005). On the other hand the horizontal forces of support delivered to the load due to thermal loads has been no report about the criteria. Therefore, this study was performed the review of the reaction and displacement on support by structure-track interaction in a special bridge(composite brdiges, 45+55+55+45=200m) with REJ acting on the temperature load. As a result, because fixed support of a special bridge or a continuous bridge with REJ under the temperature load which is constant load has been acted the large lateral load by structure-track interaction, when determining the fixed bearing capacity of structure should be reflected in the results to secure the safety of structures was confirmed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1875-1881
• /
• 2007

Deformations of bridge deck ends on abutments or on transition between bridge decks can cause extreme deformations on track. Especially, since slab track is fixed onto the bridge deck slab on concrete slab track-installed bridges, deformations of bridge deck ends directly affect the track behavior, and thus these interactions can bring about the premature failure of rail fastenings or other deteriorations to lower the serviceability. In this study, a foreign standard to evaluate forces on track components caused by the track-bridge interactions and the serviceability of bridge deck ends is investigated, and for the real bridges, the serviceability of bridge deck ends according to several parameters of bridge and track is analyzed. It is found that arrangements and spring coefficients of bridge bearings, as well as distance between bridge bearing and last rail support, support spacings, rail support spring coefficient, are very important parameters.

• 한국철도학회논문집
• /
• 제20권2호
• /
• pp.234-240
• /
• 2017

레일표면 품질지수(QI: Quality Index)가 동적 궤도작용력에 미치는 영향을 알아보기 위하여 현장측정을 통해 레일연마횟수(Pass)에 따른 레일표면 품질지수의 변화를 분석하였다. 이론식에 근거하여 레일표면 품질지수에 영향을 미치는 매개변수인 열차속도에 따른 상관관계를 분석하였다. 레일연마횟수에 따른 레일표면 품질지수가 동적 궤도작용력에 미치는 영향을 분석한 결과, 레일표면 품질지수는 레일연마가 진행됨에 따라 감소하고 동적 궤도작용력 역시 일정 비율로 감소하는 것으로 분석되었으며, 고속주행 시 레일표면 품질지수에 따라 동적 궤도작용력은 크게 증가하는 것으로 분석되었다. 즉, 레일연마는 레일표면 품질지수를 일정비율로 감소시킬 수 있고, 궤도시스템 전반에 영향을 미치는 동적 궤도상호작용력을 저감 시킬 수 있는 것으로 분석되어 효율적인 레일표면관리를 위해서는 운행 노선의 열차속도를 감안한 레일표면 품질지수의 관리가 필요한 것으로 분석되었다.

• Interaction and multiscale mechanics
• /
• 제5권1호
• /
• pp.1-12
• /
• 2012

Considerable longitudinal rail forces and displacements may develop in continuous welded rail (CWR) track on long-span bridges due to temperature variations. The track stability may be disturbed due to excessive relative displacements between the sleepers and ballast bed and the accompanied reduction in frictional resistance. For high-speed tracks, however, solving these problems by installing rail expansion devices in the track is not an attractive solution as these devices may cause a local disturbance of the vertical track stiffness and track geometry which will require intensive maintenance. With reference to temperature, two actions are considered by the bridge loading standards, the uniform variation in the rail and deck temperature and the temperature gradient in deck. Generally, the effect of temperature gradient has been disregarded in the interaction analysis. This paper mainly deals with the effect of temperature gradient on the track-bridge interaction with respect to the support reaction, rail stresses and stability. The study presented in this paper was not mentioned in the related codes so far.

• Structural Engineering and Mechanics
• /
• 제2권1호
• /
• pp.95-112
• /
• 1994

This paper describes the formulation and application of a dynamic model for a conventional rail track subjected to arbitary loading functions that simulate wheel/rail impact forces. The rail track is idealized as a periodic elastically coupled beam system resting on a Winkler foundation. Modal parameters of the track structure are first obtained from the natural vibration characteristics of the beam system, which is discretized into a periodic assembly of a specially-constructed track element and a single beam element characterized by their exact dynamic stiffness matrices. An equivalent frequency-dependent spring coefficient representing the resilient, flexural and inertial characteristics of the rail support components is introduced to reduce the degrees of freedom of the track element. The forced vibration equations of motion of the track subjected to a series of loading functions are then formulated by using beam bending theories and are reduced to second order ordinary differential equations through the use of mode summation with non-proportional modal damping. Numerical examples for the dynamic responses of a typical track are presented, and the solutions resulting from different rail/tie beam theories are compared.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1637-1646
• /
• 2008

Deformations of bridge deck ends on abutment can cause extreme deformations on track. Especially, since slab track was fixed onto the bridge deck slab on concrete slab track installed bridges, deformations of bridge deck ends directly affect the slab track behavior, and thus these interactions can bring about the premature failure of rail fastenings or other deteriorations to lower the serviceability. In this study, a foreign standard to evaluate forces on track components caused by the track-bridge interactions and the behavior of bridge deck ends was investigated and for real scale bridges. It was found that rail support spring coefficients, as well as toe loads, support spacing were very important parameters.