• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.65-79
• /
• 1994

본 연구에서는 선미벌브의 채택이 유체력 특성 및 조종성능에 미치는 영향에 관해서 실험적으로 고찰하였다. 연구방법으로서는 일반선미 형상과 선미벌브 형상을 가지는 각각의 모형선을 공시선으로, 회류수조에서 조종성 관련 구속모형시험을 실시하여 양 선형의 차이에 기인하는 유체력 특성과 조종성능을 비교, 검토하였다. 연구 결과, 선미벌브를 채택함으로써 침로안정성은 나빠지지만 선회력이 향상됨을 확인하였고, 이러한 조종성능의 특성과 유체력 특성과의 상관관계를 규명하였다.

• 공업화학
• /
• 제32권6호
• /
• pp.700-705
• /
• 2021

본 연구에서는 하이드로늄 이온 농도를 모니터링하기 위한 티타늄(Ti) 와이어를 기반으로 하는 휴대용 일회용 pH 센서를 성공적으로 개발하였다. 센싱 전극은 Ti 와이어에 이리듐 산화물을 전기화학적으로 증착하여 제조하였고, 기준 전극으로 Ti 와이어에 Ag/AgCl 잉크를 코팅하였다. pH 센서에 두 개의 전극을 결합한 후 pH 센서를 다양한 pH 용액에 담그면 개방 회로 전위 신호를 수집할 수 있다. 상기 제조된 pH 센서는 감도, 응답 시간, 반복성, 선택도 및 안정성 측면에서 우수한 전기화학적 감지 성능을 보여 주었다. 현장 검사 응용을 시연하기 위해서 pH 센서를 모바일 애플리케이션과 통신할 수 있는 무선 전자 모듈과 통합하였다. 이 휴대용 pH 센서는 실제 샘플의 pH 변화를 정확하게 측정했으며 결과는 상용 pH 측정기의 데이터와 일치하였다.

• Tribology and Lubricants
• /
• 제35권3호
• /
• pp.183-189
• /
• 2019

The driver seat of an automobile is in direct contact with the driver and provides the driver with a safe and comfortable ride. The seat consists of a frame, a rail, and many recliners. In recent years, strength and operating force measurement testing of the recliner have become vital for designing car seats. However, performance evaluation requires expensive testing equipment, numerous seat products, and considerable time. Therefore, the trend is to reduce experimentation through interpretation. This study examines the lubrication of solid lubricant for automotive seat recliners and confirms the friction and wear performance. In this study, the lubrication behavior of solid lubricants for car seat recliners is investigated to ascertain the friction and wear performance and to provide accurate values for the strength analysis. The friction material consists of a pin and a plate made from steel, which is widely used in recliners. The friction and wear under lubrication conditions are measured by a reciprocating friction wear tester. The friction coefficient is obtained according to the load and speed. Based on the obtained results, it is possible to achieve a reduction in the error of the test value and the analysis by providing the friction coefficient and wear of the lubricant. The results can be applied to the analysis of automobile seat design.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.99-105
• /
• 2019

This study presents an experimental investigation of the wear and oxidation of the bristles of a brush seal in a super-heated steam environment. We construct a model reflecting normal force and radial interference to predict the amount of wear. To monitor the volume loss of the bristle induced by the swirl phenomenon of the rotor, we measure the clearance between the rotor and the brush seal by using a non-contact 3-D device. We calculate the area by using the area-wise measurement method. Considering the obvious brush seal wear variables, we use two disks with different roughness($Ra=0.1{\mu}m$ and $100{\mu}m$) to determine the effect of roughness on wear. Considering an actual steam turbine, we utilize a steam generator and super-heater to generate a working fluid (0.95MPa, 523.15K) that has high kinetic energy. We observe the abrasion of the bristles in the hot steam environment through a scanning electron microscope image. This study also conducted energy dispersive X-ray (EDX) analysis for a qualitative evaluation of local chemistry. The results indicate that the wear and elimination of bristles occur on the disk with high roughness, and the weight increases due to oxidation. Furthermore these results, reveal that the bristle oxidation is accelerated more under super-heated steam conditions than under conditions without steam.

• 한국인터넷방송통신학회논문지
• /
• 제19권1호
• /
• pp.279-287
• /
• 2019

본 논문에서는 신체의 움직임 정보와 족압 분포의 변화를 측정하여 신체 균형 능력을 분석하고자 하였다. 그래서 관성측정장치와 FSR 센서를 사용하여 관절가동범위와 신체압력중심을 측정하고 분석할 수 있는 프로그램을 개발하였고, 이에 대한 결과를 바탕으로 균형 능력 개선에 도움을 줄 수 있는 콘텐츠를 제작하였다. 이 프로그램에서 측정된 관절가동범위와 신체압력중심의 정량적인 값을 실시간으로 시각화하여 사용자가 결과를 쉽게 알 수 있도록 하였다. 또한 콘텐츠는 측정된 균형정보를 바탕으로 난이도가 조절되며 균형능력을 개선하고자 하는 방향에 맞춰 수행할 수 있도록 제작되었다. 이것은 사용자의 동작에 따라 움직이는 물체를 보면서 진행하는 시각 되먹임 방법을 이용하여 집중력과 참여의지를 높여 더욱 효과적인 균형 훈련 결과를 기대할 수 있다.

• 한국재료학회지
• /
• 제31권2호
• /
• pp.61-67
• /
• 2021

Fabrication of a ferromagnetic composite powder for the magnesium and BaFe12O19 system by mechanical alloying (MA) is investigated at room temperature. Mixtures of Mg and BaFe12O19 powders with a weight ratio of Mg:BaFe12O19 = 4:1, 3:2, 2:3 and 1:4 are used. Optimal MA conditions to obtain a ferromagnetic composite with fine microstructure are investigated by X-ray diffraction, differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM) measurement. It is found that Mg-BaFe12O19 composite powders in which BaFe12O19 is dispersed in Mg matrix are successfully produced by MA of BaFe12O19 with Mg for 80 min. for all compositions. Magnetization of Mg-BaFe12O19 composite powders gradually increases with increasing the amounts of BaFe12O19, whereas coercive force of MA powders gradually decreases due to the refinement of BaFe12O19 powders with MA time for all compositions. However, it can be seen that the coercivity of Mg-BaFe12O19 MA composite powders with a weight ratio of Mg:BaFe12O19=4:1 and 3:2 for MA 80 min. are still high, with values of 1260 Oe and 1320 Oe compared to that of Mg:BaFe12O19=1:4. This clearly suggests that the refinement of BaFe12O19 powders during MA process for Mg:BaFe12O19=4:1 and 3:2 tends to be suppressed due to ductile Mg powders.

• 한국해양바이오학회지
• /
• 제12권2호
• /
• pp.81-90
• /
• 2020

Sialic acid, which is contained in about 60-160 mg/kg in the edible bird's nest (EBN), is known to facilitate in the proper formation of synapses and improve memory function. The objective of this study is to extract effectively the sialic acid from edible bird's nest using affinity bead technology (ABT). After preparing the non-polar polymeric bead "KJM-278-28A" having a porous network structure, and then desorbed sialic acid was concentrated and dried. The analysis of the physicochemical properties of bead "KJM-278-28A" showed that the particle size was 400-700 ㎛, the moisture holding capacity was 67-70%, the surface area (BET) was 705-900 ㎡/g, and the average pore diameter 70-87 Å. The adsorption capacity of the bead "KJM-278-28A" for sialic acid was shown a strong physical force to bind sialic acid to the bead surface of 400 mg/L. In addition, as a result of analyzing the adsorption and desorption effects of sialic acid on water, ethanol, and 10% ethanol on the bead, it was confirmed that desorption effectively occurs from the beads when only ethanol is used. As a result of HPLC measurement of the separated sialic acid solution, a total of four sialic acid peaks of N-acetyl-neuraminic acid (Neu5Ac), α,β-anomer of Neu5Ac and N-glycoly-neuraminic acid were identified. Through these results, it was confirmed that it is possible to separate sialic acid from EBN extract with efficient and high yield when using ABT.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• 한국건축시공학회지
• /
• 제22권6호
• /
• pp.597-606
• /
• 2022

본 논문은 발수제 혼입에 따른 시멘트 모르타르 표면의 얼음 제거성능에 다양한 요인 중 발수제 첨가 및 종류에 대한 영향을 검토하였다. 그 결과 발수제 첨가 시멘트 모르타르의 압축강도는 무첨가 시멘트 모르타르와 비교하여 감소하였고, 올리고머계 발수제 첨가 모르타르의 압축강도는 모노머계 발수제와 비교하여 높게 나타났다. 발수제 첨가 모르타르의 접촉각은 무첨가 모르타르와 비교하여 증가하였고 모노머계 발수제보다는 올리고머 발수제가 상대적으로 증가하였다. 발수제 혼입에 따른 시멘트 모르타르의 얼음형성시간 측정 결과 발수제를 첨가하였을 때 25분까지 지연시키는 것으로 나타났다. 얼음 제거하중 측정결과 발수제를 첨가하지 않은 모르타르는 342N을 발현하였고 발수제를 첨가한 모르타르는 31N을 발현하여 발수제를 모르타르에 첨가하는 경우 얼음제거성능이 감소하였다.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.296-302
• /
• 2022

This paper proposes a center of plantar foot pressure (CoP) trajectory estimation method based on Gaussian process regression, with the aim to show robust results regardless of the regions and numbers of FSRs of the insole sensor. This method can bring an interpolation between the measurement points inside the wearable insole sensor, and two experiments are conducted for performance evaluation. For this purpose, the input data used in the experiment are generated in three types (13 FSRs, 8 FSRs, 5 FSRs) according to the regions and numbers of FSRs. First, the estimation results of the CoP trajectory are compared using Gaussian process regression and weighted mean. As a result of each method, the estimation results of the two methods were similar in the case of 13 FSRs data. On the other hand, in the case of the 8 and 5 FSRs data, the weighted mean varies depending on the regions and numbers of FSRs, but the estimation results of Gaussian process regression showed similar results in spite of reducing the regions and numbers. Second, the estimation results of the CoP trajectory based on Gaussian process regression during several gait cycles are analyzed. In five gait cycles, the previous cycle and the current estimation results are compared, and it was confirmed that similar trajectories appeared in all. In this way, the method of estimating the CoP trajectory based on Gaussian process regression showed robust results, and stability was confirmed by yielding similar results in several gait cycles.