• Wind and Structures
• /
• 제30권6호
• /
• pp.617-631
• /
• 2020

Wake-induced aerodynamics of yawed circular cylinders with smooth and grooved surfaces in a tandem arrangement was studied. This pair of cylinders represent sections of stay-cables with smooth surfaces and high-voltage power conductors with grooved surfaces that are vulnerable to flow-induced structural failure. The study provides some insight for a better understanding of wake-induced loads and galloping problem of bundled cables. All experiments in this study were conducted using a pair of stationary section models of circular cylinders in a wind tunnel subjected to uniform and smooth flow. The aerodynamic force coefficients and vortex-shedding frequency of the downstream model were extracted from the surface pressure distribution. For measurement, polished aluminum tubes were used as smooth cables; and hollow tubes with a helically grooved surface were used as power conductors. The aerodynamic properties of the downstream model were captured at wind speeds of about 6-23 m/s (Reynolds number of 5×10⁴ to 2.67×10⁵ for smooth cable and 2×10⁴ to 1.01×10⁵ for grooved cable) and yaw angles ranging from 0° to 45° while the upstream model was fixed at the various spacing between the two model cylinders. The results showed that the Strouhal number of yawed cable is less than the non-yawed case at a given Reynolds number, and its value is smaller than the Strouhal number of a single cable. Additionally, compared to the single smooth cable, it was observed that there was a reduction of drag coefficient of the downstream model, but no change in a drag coefficient of the downstream grooved case in the range of Reynolds number in this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.521-532
• /
• 2008

Supporting system design and construction management for the soft and hard rock layers with fractured zones are very important theme for the safety of temporary retaining wall, surrounding ground and structures in the urban deep excavation for the construction of subway, railway, building etc. The prevailing design method of supporting system for the soft and hard rock layers in the deep excavation is mostly carrying out by simplification without proper consideration for the characteristic of rock discontinuities. Therefore the behaviors of rock discontinuities and fractured zones dominate the whole safety of excavation work in the real construction stage, serious disaster due to the failure of temporary retaining wall can be induced in the case of developing large deformations in the ground and large axial forces in the supporting system. This paper introduces examples of deep excavation where the soft and hard rock layers with fractured zones were designed to be supported by shotcrete and rock bolt, deformations of corresponding ground and supporting systems in the construction period and increments of axial force in the upper earth anchors and strut due to the these deformations were investigated through detailed analysis of measurement data, the results were so used for the management of consecutive construction that led to the safe and economical completion of excavation work. The effort of this article aims to improve and develop the technique of design and construction in the coming projects having similar ground condition and supporting method.

• Journal of Oral Medicine and Pain
• /
• 제19권2호
• /
• pp.153-168
• /
• 1994

The aim of the present study was to investigate a relation between occlusal wear area and occlusal contact patterns. For the purpose, occlusal wear area were measured in 58 dental students and in 129 patients with temporomandibular disorders(TMDs) from dental casts. Teeth used in this study were from canine to second molar on both sides in upper arch, totally ten. Occlusal wear area on casts was marked by pencil and photocopies, and then, the area was measured with planimeter. Occlusal relation was clinically examined with regard to Angle's classification, chewing side preference, lateral guidance pattern and bruxing and/or clenching habit. T-Scan, electronic occlusal contact analyzer, was used to record occlusal contact number, contact force, contact time and occlusal balance that is TLR(total left-right statistics) during tooth contact. All measurement were repeated 3 times and the average value was used for data processing. The obtained results were as follows : 1. Mean value of occlusal wear area did not differ significantly between dental students and patients. 2. There ws not significant difference in wear area between chewing side and non-chewing side in both groups. 3. Occlusal wear area was significantly increased with age in both groups. 4. Three subgroups divided by Angle's classification did not show any difference in occlusal wear area among them, but three subgroups divided by lateral guidance pattern showed slightly significant difference between canine guide subgroup and group function subgroup in patients. Occlusal wear ares\a in group function subgroup wear larger than canine guide subgroup. 5. Mean value of wear area in patients with bruxing and/or clenching habit did not differ from those in patients without such habit. 6. Correlationship among items related to occlusal contact pattern were highly consistent and significant in dental students and only one item significantly correlated with occlusal wear area was tooth contact time.

• 보건교육건강증진학회지
• /
• 제22권1호
• /
• pp.147-160
• /
• 2005

The purpose of this study is to identify the nature of the patient service quality of health center, and based on that, to examine the relationship of health center visitor's perceived quality and overall satisfaction. Data were collected on the basis of 'the 3rd Regional Health Care Planning' operated by Rural Health Care Service Technology Aid Task-force Team(RHCSTAT), Ministry of Health and Welfare. Basically, the Manual of 3rd Regional Health Care Planning is composed of structure, process, and outcome measurement indicators. Of these indicators, 21 patient satisfaction questions as outcome indicators are used in this study. The samples are 3,530 patients who visited 80 health centers all of the nation. First, the reliability and validity of patient service quality items was evaluated. Second, the descriptive statistics of health service quality are calculated. Third, through the T-test and ANOVA, the differences of patient satisfaction by responder's general characteristics are compared. In final, to explore the relationship of service quality and overall satisfaction, multiple regression analysis was used. This study shows firstly, the dimension of patient service quality was categorized into 3 dimensions, that is, facilities and environment, staff kindness, and access convenience. Secondly, the reliability and validity of patient service quality items was satisfied. Thirdly, the mean score of staff kindness factors are high in contrast to the facilities and environment. And in regard to the overall satisfaction, the mean score is more higher in Daegu region, County type health center, male group, and upper 65 age group than comparison groups. Lastly, as a result of multiple regression analysis, the effect of patient's perceived service quality, especially, appropriateness of billing time(Beta=0.190) and of reservation time(Beta=0.132) are statistically significant(P<0.01). In conclusion, to satisfy the health need of community people and improve the service quality of the health center, the efforts for the access convenience might be needed. Additionally, the enlargement on health center space and supply of new medical equipment is urgent for the patient satisfaction.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.965-968
• /
• 2004

Effective transverse Piezoelectric Coefficients $(e_{31,f})$ of thick PZT $(Pb(Zr_{0.52}Ti{0.48}Ti_{0.48})O_3)$ films on $SiN_x/Si$ substrates were measured with PZT thicknesses and top electrode dimensions. $e_{31,f}$ is one of important Parameters characterizing Piezoelectricity of PZT films. Thick PZT films have been used as various sensors and actuators because of their high driving force and high breakdown voltage. Thick PZT films were fabricated on Pt/Ta/$SiN_x$/Si substrates using sol-gel method. Thicknesses of PZT films were $1{\mu}m$ and $1.8{\mu}m$. $|e_{31,f}|$ values of $1.8{\mu}m$-thick-PZT films were higher than those of $1{\mu}$-thick-PZT films. Maximum $|e_{31,f}|$ of $1.8{\mu}$-thick-PZT films was about $50^{\circ}C/m^2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.938-941
• /
• 2003

It is well known that the state of existence of molecules on the surface of water changes during compression of the molecules. Electric methods, such as measurement of the surface potential or displacement current are also useful for investigating dynamic changes of molecular state on the water surface during compression and Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic thin film that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. In this paper Langmuir (L) that is one of basis technology to manufacture of organic matter device using biology material PBDG that is kind of polypeptide that have biology adaptedness. The Experiment method used ${\pi}-A$ isotherm and BAM(Brewster Angle Microscopy), using the BAM, we can to the molecular orientation of monolayer on the water surface and directly see the morphology of the films on water subphase as well as that of the films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.424-424
• /
• 2008

Dye-sensitized Solar Cell (DSC) is a new type of solar cell by using photocatalytic properties of $TiO_2$. The electric potential distribution in DSCs has played a major role in the operation of such cells. Models based on a built-in electric field which sets the upper limit for the open circuit voltage(Voc) and/or the possibility of a Schottky barrier at the interface between the mesoporous wide band gap semiconductor and the transparent conducting substrate have been presented. $TiO_2$ thin films were deposited on the FTO substrate by Nd:YAG Pulsed Laser Deposition(PLD) at room temperature and post-deposition annealing at $500^{\circ}C$ in flowing $O_2$ atmosphere for 1 hour. The structural properties of $TiO_2$ thin films have investigated by X-ray diffraction(XRD) and atomic force microscope(AFM). Thickness of $TiO_2$ thin films were controlled deference deposition time and measurement by scanning electron microscope(SEM). Then we manufactured a DSC unit cells and I-V and efficiency were tested using solar simulator.

• 한국항공우주학회지
• /
• 제45권7호
• /
• pp.539-549
• /
• 2017

본 논문에서는 마하 3의 초음속 유동 환경에서의 슈라우드 분리 특성 연구를 위한 시험을 수행하였다. 시험은 분리 구조물의 시험이 가능한 수직 자유 젯 풍동에서 이루어졌다. 분리시험용 슈라우드는 시험 목적과 시험 환경에 맞게 소형화한 축소형 모델을 사용하였으며 외부 유동의 하중을 고려해 잠금/전개장치를 설계하였다. 고속카메라를 활용해 슈라우드가 전개되는 동안 슈라우드에서 생성되는 충격파 변화 양상과 슈라우드 전개/분리 거동을 기록하였다. 또 첨두부 동체 표면에는 압력센서를 적용해 슈라우드가 전개되는 동안 첨두부 표면에 작용하는 비정상 압력을 계측하였다. 시험자료 분석 결과, 슈라우드 분리기술 연구에 필요한 슈라우드 분리 영상 및 첨두부 비정상 압력 자료를 획득하였다. 아울러 외부 유동의 온도와 방향 조건에 따른 슈라우드 분리 거동과 충격파 변화 양상 그리고 첨두부 표면 압력 변화 특성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.33-41
• /
• 2008

Bearing damages by shaft misalignment have frequently been happened in marine ships. Specially. after stern tube bearing damage and failure for large crude oil carriers have been reported several times. However. the bearing reaction of the after stern tube bearing cannot be measured by jack-up test due to the hull structure condition. Therefore, when the jack-up test is used for the bearing reaction measurements, the bearing reaction for the after stern tube bearing obtained from the theoretical calculation method have to be used. In this paper, the shaft alignment on the large oil crude carrier is theoretically calculated and the differences between the calculated and actual installed bearing reaction values are compared. The bearing reactions for forward stern tube bearing and intermediate bearing are calculated by the simple formula using the strain gauge bending moments obtained from the measurements. Their reliability is confirmed by comparing the bearing reactions from jack-up test and the bearing reaction for after stern tube bearing is calculated by the same test. Also, the bearing reactions on the after stern tube bearing, forward stern tube bearing and intermediate shaft bearing under all operating conditions are calculated by using the bending moments obtained from the measurements and it is confirmed that the differences of the bearing reaction for all operating conditions are caused from hull deflection. The results of this study should prove useful for the future projects of the alignment calculation including the hull deflection effectiveness.

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.1053-1061
• /
• 2015

본 연구는 테어링 튜브에 플랫 다이를 설치하고 동하중이 가해졌을 때 에너지흡수용량 및 거동을 예측하기 위하여 수행하였다. 컬 끝과 튜브 본체가 접촉할 때 컬 끝의 굽힘이 발생함을 발견하고 식을 제안하였다. 그러나 컬 끝의 굽힘 하중과 에너지 소산율의 예측을 더욱 정확히 하기 위해 컬의 곡률반경의 변화와 튜브 두께의 감소에 주목할 필요가 있었다. X.Huang 등이 제안한 테어링 튜브 이론 모델에 컬의 평균 곡률반경, 감소하는 튜브 두께를 반영한 컬 끝의 굽힘 식을 추가하였고 충돌시험 결과를 통하여 검증하였다.