• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.265-268
• /
• 2005

A new method for measurement of the pore size in a nanohoneycomb structure using atomic force microscopy (AFM) was proposed. Porous type anodic aluminum oxide (AAO) was fabricated as a nanohoneycomb structure to measure the pore size. For measuring pore sizes from AFM images, a criterion was set in porous type AAO. The pore sizes from AFM images were compared with those from SEM images, and the results showed good agreement. The relationship between the pore size and widening time was found to be linear in the range of this study. It was understood as the synchronized effects of the impurity gradient in outer oxide of AAO, mechanical packing and mass transfer increase.

• 한국안전학회지
• /
• 제19권2호
• /
• pp.88-92
• /
• 2004

The paper decribes a procedure for the evaluation of the effect of seepage force on stability of slopes. The stability of an embankment impounding a water reservoir is highly depend upon the location of seepage line with the embankment. To evaluate the accurate safety factor of an embankment, it is important to illustrate the seepage phenomenon. Of particular interest is the stability following a rapid change of reservoir level. Seepage forces in embankments are easily determined interest is the stability following a rapid change of resrvoir level. Seepage forces in embankments are easily detemined if frictional forces are expressed in relation to hydraulic gradient I. If a piezometer is inserted into a body of embankment, the level to which fee water rises is a measure of the energy at that point.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1765_1766
• /
• 2009

In this paper, we propose the mathematical model for the vehicle system and the observer for adhesion force. To model the dynamic properties of vehicle system, we have considered two fundamental parts. The first part is the motion equations for vehicle based on Newton's second law. The second part is the torque dynamics of the traction motor. These parts are affected by outer conditions such as adhesive coefficient, running resistance and gradient resistance. The each parts are presented by the numerical formula. From two equations, we get the observer on adhesion force. Simulation results show that the proposed observer have the good performance compared with the normal observer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1521_1522
• /
• 2009

Chemotaxis is the directed movement of cells in gradients of signaling molecules, an essential biological process that underlies morhpogenesis during development, and the recruitment of immune cells to sites of infection. Especially, bacterial chemotaxis has utilized as an important prelude to study metabolism, prey-predator relationship, symbiosis, other ecological interactions in microbial communities. Recently, novel analytical formats integrated with microfluidics were introduced to investigate the chemotaxis of the cells with the precise control of chemical gradient and small volume of cells. In this study, we present a method to detect bacterial chemotaxis by direct fluidic contacting. The developed fluidic-handling method is driven by capillary force, hydrophobic barrier and a cohesion force between fluids. We have investigated the chemotactic response of E Coli. and Pseudomonas aeruginosa to three kinds of chemoeffectors such as HEPES buffer, peptone and chloroform.

• Nuclear Engineering and Technology
• /
• 제30권1호
• /
• pp.17-25
• /
• 1998

Transport of carbon and boron impurity ions parallel to magnetic field lines in the tokamak SOL (scrape-off layer) is numerically investigated for a one-dimensional steady state. The spatial distributions of density and velocity of the impurity ions in a steady state are calculated by finite difference method for a single-fluid model. The calculated results show that among forces acting on SOL particles thermal force produced tv plasma temperature gradient is a principal force determining the feature of impurity distribution profiles in the tokamak edge. However, strong collisional friction forces appearing dominant in front of the diverter plate restrain impurity ion flows due to temperature gradients from moving toward the midplane. Consequently, the stagnation point develops in the impurity flow by these two forces near the diverter region, in which ion flows change their directions. Impurity ions turn out to be accumulated at the stagnation points, where peaked profiles of highly-ionized state ions are relatively predominant over those of low-ionized state ions.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.181-189
• /
• 1985

본 연구에서는 단순유로인 단면이 장방형인 각통을 그것에 수직한 축둘레에 회전시켜서 유로의 압력측 및 부압측에서의 속도 및 변동속도성분의 거동을 실험적으 로 조사함으로서 코리올리힘이 난류경계층 내의 유동에 미치는 영향을 구명하였다.

• 한국광학회지
• /
• 제7권1호
• /
• pp.24-27
• /
• 1996

790nm의 반도체 레이저를 이용하여 수용액 속에 잠겨있는 $3~4\mu\textrm{m}$크기의 yeast입자를 포획하는데 성공하였다. 포획된 입자는 2차원 평면과 3차원 공간의 이동에도 안정된 포획 상태를 유지하였다. 이 실험으로 레이저 광속이 매질과 입자의 표면에서 굴절할 때, 입자의 굴절률과 매질의 굴절률의 차에 의하여 생기는 광압의 존재를 확인하였다. 그리고 레이저 광속에 수직하게 입자를 움직이면서 레이저 광속에 수직한 방향의 포획력을 측정하고 레이저의 출력에 따른 변화를 연구하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.272-273
• /
• 2001

We demonstrate the first separation of neutral molecules using optical forces. Unlike laser atomic cooling or optical tweezers, optical separation technique requires the manipulation of only one component of the molecular motion. Thus the mixtures can be separated, in principle, with less complex schemes. When an Intense nonresonant laser beam is focused onto a beam of molecules, the interaction between the laser electric field and the induced dipole moment of a molecule invokes a mechanical force on the molecule proportional to the field gradient and the molecular polarizability ($\alpha$) to mass (m) ratio $\alpha$/m. (omitted)

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권2호
• /
• pp.69-75
• /
• 2004

In this paper, we propose the shape of extremely small thrust VCM for application of the Nanoindenter, which enables control of very small force and displacement. We performed optimization of the VCM shape using conjugated gradient method. And the purposes of optimization are the minimization of the permanent magnet size for the efficient systems, minimization of deviation of flux density from the air gap for operate on regular thrust and a linearization of thrust for a good control characteristic. The finite element method is used for characteristic analysis. The node moving method is used to redundant changes of design variables. As a result, the VCM produces a yew small force by the difference of flux density of lower part from higher one. Also, in a wide range of current (0［A］-1［A］), the VCM produces linear driving thrust by saturating the magnetic circuit path and operate on regular thrust by minimizing deviation of flux density of the air gap.

• 한국안전학회지
• /
• 제11권4호
• /
• pp.151-155
• /
• 1996

사면안정 해석에 있어서 기존의 연구는 대부분 침투력의 값을 고려하지 않고 안전율을 계산하여 왔다. 그러나 비정상 침투시 침투력은 안전율에 많은 영향을 미친다. 따라서 본 연구에서는 사면안정해석에 있어서 침투력의 영역이 사면의 안전율에 미치는 영향이 큰 것을 확인하기 위해서 Bishop's Simplified Method를 이용하여 이론적으로 침투력을 고려한 안전율계산 수식을 유도하였다. 사면안정 이론식의 전개방법은 제체에 침윤선이 형성될 경우 침윤선을 기준으로 각 절편을 수중상태와 습윤상태로 구분하고, 이 습윤상태의 절편토체에 작용하는 침투력을 고려하여 사면안정수식을 해석했다.