• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.721-732
• /
• 2008

Pressed ham was manufactured to investigate the effects of grape seed oil on the quality characteristics of pressed ham. Five treatments were divided based on differences in the amount of grape seed oil added into the pressed ham. For control, 10% of back fat was only added without grape seed oil. For the first treatment, 10% of grape seed oil among the lard component added into the pressed ham was replaced. For the 2nd, 3rd and 4rd treatments, 20%, 30% and 40% of grape seed oil was respectively replaced. Pressed ham manufactured using grape seed oil was vacuum packaged and then stored for 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory properties, TBARS and fatty acid composition. In the 1, 21 and 28 days of storage, shear force value of grape seed oil treatment (T4) was significantly lower than that of control (P<0.05). No remarkable differences were found in sensory properties among control and grape seed oil treatment groups. The TBARS value was significantly higher in control than in grape seed oil treatment group(T4) at 28 days of storage (P<0.05). The TBARS of control and grape seed oil treatment groups increased significantly as the storage period increased(P<0.05). The linoleic acid(C18:2) content of grape seed oil treatment groups was significantly higher than that of control(P<0.05). But the contents of C10:0～C20:4 were decreased significantly by grape seed oil additive (P<0.05). Saturated and monounsaturated fatty acid content of control was significantly higher than that of grape seed oil treatment groups(P<0.05). Whereas the increase level of grape seed oil additive resulted in the significantly higher polyunsaturated fatty acid content(P<0.05). Based on these findings, we conclude that the sensory properties and lipid oxidation(TBARS) of manufactured pressed ham were not affected by grape seed oil addition. Also, our results indicate that high-quality pressed ham can be manufactured with strengthen of polyunsaturated fatty acid content.

• Food Science of Animal Resources
• /
• v.28 no.2
• /
• pp.130-137
• /
• 2008

This study was carried out to investigate the effects of olive oil on the quality characteristics of pressed ham. Five different treatments were tested based on differences in the amount of olive oil added to the pressed ham. As a control, 10% back fat was added without any olive oil. For the first treatment, 5% olive oil replaced a portion of the lard component added to the press ham. For the 2nd, 3rd and 4th treatments, 10%, 15% and 20% of olive oil were substituted for lard, respectively. Pressed ham manufactured with olive oil was vacuum packaged and stored for 1, 7, 14, 21 and 28 days at $4^{\circ}C$. Samples were analyzed for shear force value, sensory properties, TBARS values and fatty acid composition. Shear force values increased significantly during storage for all treatments. No remarkable differences were found in sensory properties (color, flavor, texture, and acceptability) between the control and olive oil treated hams, and there was no clear change with increased storage time. There was no significant difference in TBARS values between the control and olive oil treated hams. The TBARS values increased significantly during storage for all treatments. With regard to changes in fatty acid composition, the contents of C14:0-C20:4 were decreased significantly by the addition of olive oil. The saturated fatty acid and polyunsaturated fatty acid contents of the control were significantly higher than the olive oil treated hams. Higher levels of added olive oil resulted in significantly higher monounsaturated fatty acid contents. Based on these findings, we conclude that the sensory properties and lipid oxidation (TBARS) of manufactured pressed hams are not affected by olive oil addition. These results also indicate that high-quality pressed ham can be manufactured with increased monounsaturated fatty acid content.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.659-666
• /
• 2004

This study was conducted to assess objective and subjective meat quality traits for imported chilled beef with a high degree of marbling in longissimus muscle with reference to Hanwoo beef Muscle samples of four Wagyu, four Angus, four Hanwoo grade 1, and three Hanwoo grade 3 were purchased from a commercial beef market. The meats had intramuscular fat content of approximately 22, 8, 13 and 4%, and aged for 31, 71, 14 and 14 days, respectively. Imported beef showed a significantly(P<0.05) lower WB-shear force than Hanwoo. However, the instrument measurement did not reflect sensory tenderness and juiciness, which were similar between the four groups. On the other hand, Hanwoo beef showed significantly(P<0.05) favorable flavor intensity. This was likely an indication of more a desirable eating quality for Hanwoo beef, regardless of the level of intramuscular fat content. Discriminant functions of C18: 0, C18: In-7, C18: In-9, C20: 3n-6, C20 : 4n-6 and total n-3 polyunsaturated fatty acids classified the domestic and foreign beef products at 100%, despite a noticeable difference between two groups existed only in C18:0. Principle component analysis indicated that subjective flavor intensity was negatively related to C18: 0 and C18: ln-7. The result indicated that C18: 0 could be a possible candidate fatty acid for difference in flavor intensity between two beef groups. The current study demonstrated that the domestic product was more acceptable for Korean consumers. However, it was not identified whether the result was associated with breed, feeding regime, or ageing time. Further studies are required for breed specification in terms of sensory characteristics and consumer preference.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.1-33
• /
• 1997

The objective of this study was to analyze the in vitro and in vivo corrosion products of low and high copper amalgams. The four different types of amalgam alloy used in this study were Fine cut, Caulk spherical, Dispersalloy, and Tytin. After each amalgam alloy and Hg were triturated according to the directions of the manufacturer by means of the mechanical amalgamator(Amalgam mixer. Shinhung Co. Korea), the triturated mass was inserted into a cylindrical metal mold which was 12mm in diameter and 10mm in height. The mass was condensed by 150Kg/cm compressive force. The specimen was removed from the mold and aged at room temperature for about seven days. The standard surface preparation was routinely carried out by emery paper polishing under running water. In vitro amalgam specimens were potentiostatically polarized ten times in a normal saline solution at $37^{\circ}C$(potentiostat : HA-301. Hukuto Denko Corp. Japan). Each specimen was subjected to anodic polarization scan within the potential range -1700mV to+400mV(SCE). After corrosion tests, anodic polarization curves and corrosion potentials were obtained. The amount of component elements dissolved from amalgams into solution was measured three times by ICP AES(Inductive Coupled Plasma Atomic Emission Spectrometry: Plasma 40. Perkim Elmer Co. U.S.A.). The four different types of amalgam were filled in occlusal and buccal class I cavities of four human 3rd molars. After about five years the restorations were carefully removed after tooth extraction to preserve the structural details including the deteriorated margins. The occlusal surface, amalgam-tooth interface and the fractured surface of in vivo amalgam corrosion products were analyzed. In vivo and in vitro amalgam specimens were examined and analyzed metallographically by SEM(Scanning Electron Microscope: JSM 840. Jeol Co. Japan) and EDAX(Energy Dispersive Micro X-ray Analyser: JSM 840. Jeol Co. Japan). 1. The following results are obtained from in vitro corrosion tests. 1) Corrosion potentials of all amalgams became more noble after ten times passing through the in vitro corrosion test compared to first time. 2) After times through the test, released Cu concentration in saline solution was almost equal but highest in Fine cut. Ag and Hg ion concentration was highest in Caulk spherical and Sn was highest in Dispersalloy. 3) Analyses of surface corrosion products in vitro reveal the following results. a)The corroded surface of Caulk spherical has Na-Sn-Cl containing clusters of $5{\mu}m$ needle-like crystals and oval shapes of Sn-Cl phase, polyhedral Sn oxide phase. b)In Fine cut, there appeared to be a large Sn containing phase, surrounded by many Cu-Sn phases of $1{\mu}m$ granular shapes. c)Dispersalloy was covered by a thick reticular layer which contained Zn-Cl phase. d)In Tytin, a very thin, corroded layer had formed with irregularly growing Sn-Cl phases that looked like a stack of plates. 2. The following results are obtained by an analysis of in vivo amalgam corrosion products. 1) Occlusal surfaces of all amalgams were covered by thick amorphous layers containing Ca-P elements which were abraded by occlusal force. 2) In tooth-amalgam interface, Ca-P containing products were examined in all amalgams but were most clearly seen in low copper amalgams. 3) Sn oxide appeared as a polyhedral shape in internal space in Caulk spherical and Fine cut. 4) Apical pyramidal shaped Sn oxide and curved plate-like Sn-Cl phases resulted in Dispersalloy. 5) In Tytin, Sn oxide and Sn hydroxide were not seen but polyhedral Ag-Hg phase crystal appeared in internal space which assumed a ${\beta}_l$ phase.

• Food Science and Preservation
• /
• v.21 no.4
• /
• pp.512-519
• /
• 2014

This study was carried to investigate the physicochemical and microbiological characteristics of seasonal salted-Kimchi cabbage order to provide basic data for optimal salting and storage condition of seasonal Kimchi cabbage. Generally, fall season samples had slightly higher pH and acidity value than the other seasonal salted Kimchi cabbage. The soluble solids content of spring, summer, fall and winter samples were 5.95%, 6.18%, 6.29% and 7.76%, respectively. The salt content of all the seasonal salted Kimchi cabbage samples were insignificant. The number of microbial bacteria in the summer samples were generally much more significant than spring and winter samples. There was no significant difference in the color of seasonal salted Kimchi cabbage. As for the texture properties, the firmest samples in the surface rupture test were the spring samples (force: 4.92 kg), and the hardest samples in the puncture test were the summer samples (force: 11.71 kg). In the correlation analysis of the quality characteristics of seasonal samples, the soluble solids content and hardness of the seasonal salted Kimchi cabbage was significantly correlated at 1% significance level. Also, in the principal component analysis, F1 and F2 were shown to explain 27.28% and 35.59% of the total variance (62.87%), respectively. The hierarchical cluster analysis of the quality characteristics of seasonal samples, the samples were divided into three groups: spring cabbage group, summer cabbage group and fall and winter cabbage group.

• Asia pacific journal of information systems
• /
• v.20 no.2
• /
• pp.125-155
• /
• 2010

Ontologies have been adopted in various business and scientific communities as a key component of the Semantic Web. Despite the increasing importance of ontologies, ontology developers still perceive construction tasks as a challenge. A clearly defined and well-structured methodology can reduce the time required to develop an ontology and increase the probability of success of a project. However, no reliable knowledge-engineering methodology for ontology development currently exists; every methodology has been tailored toward the development of a particular ontology. In this study, we developed a Graduation Screen Ontology (GSO). The graduation screen domain was chosen for the several reasons. First, the graduation screen process is a complicated task requiring a complex reasoning process. Second, GSO may be reused for other universities because the graduation screen process is similar for most universities. Finally, GSO can be built within a given period because the size of the selected domain is reasonable. No standard ontology development methodology exists; thus, one of the existing ontology development methodologies had to be chosen. The most important considerations for selecting the ontology development methodology of GSO included whether it can be applied to a new domain; whether it covers a broader set of development tasks; and whether it gives sufficient explanation of each development task. We evaluated various ontology development methodologies based on the evaluation framework proposed by G$\acute{o}$mez-P$\acute{e}$rez et al. We concluded that METHONTOLOGY was the most applicable to the building of GSO for this study. METHONTOLOGY was derived from the experience of developing Chemical Ontology at the Polytechnic University of Madrid by Fern$\acute{a}$ndez-L$\acute{o}$pez et al. and is regarded as the most mature ontology development methodology. METHONTOLOGY describes a very detailed approach for building an ontology under a centralized development environment at the conceptual level. This methodology consists of three broad processes, with each process containing specific sub-processes: management (scheduling, control, and quality assurance); development (specification, conceptualization, formalization, implementation, and maintenance); and support process (knowledge acquisition, evaluation, documentation, configuration management, and integration). An ontology development language and ontology development tool for GSO construction also had to be selected. We adopted OWL-DL as the ontology development language. OWL was selected because of its computational quality of consistency in checking and classification, which is crucial in developing coherent and useful ontological models for very complex domains. In addition, Protege-OWL was chosen for an ontology development tool because it is supported by METHONTOLOGY and is widely used because of its platform-independent characteristics. Based on the GSO development experience of the researchers, some issues relating to the METHONTOLOGY, OWL-DL, and Prot$\acute{e}$g$\acute{e}$-OWL were identified. We focused on presenting drawbacks of METHONTOLOGY and discussing how each weakness could be addressed. First, METHONTOLOGY insists that domain experts who do not have ontology construction experience can easily build ontologies. However, it is still difficult for these domain experts to develop a sophisticated ontology, especially if they have insufficient background knowledge related to the ontology. Second, METHONTOLOGY does not include a development stage called the "feasibility study." This pre-development stage helps developers ensure not only that a planned ontology is necessary and sufficiently valuable to begin an ontology building project, but also to determine whether the project will be successful. Third, METHONTOLOGY excludes an explanation on the use and integration of existing ontologies. If an additional stage for considering reuse is introduced, developers might share benefits of reuse. Fourth, METHONTOLOGY fails to address the importance of collaboration. This methodology needs to explain the allocation of specific tasks to different developer groups, and how to combine these tasks once specific given jobs are completed. Fifth, METHONTOLOGY fails to suggest the methods and techniques applied in the conceptualization stage sufficiently. Introducing methods of concept extraction from multiple informal sources or methods of identifying relations may enhance the quality of ontologies. Sixth, METHONTOLOGY does not provide an evaluation process to confirm whether WebODE perfectly transforms a conceptual ontology into a formal ontology. It also does not guarantee whether the outcomes of the conceptualization stage are completely reflected in the implementation stage. Seventh, METHONTOLOGY needs to add criteria for user evaluation of the actual use of the constructed ontology under user environments. Eighth, although METHONTOLOGY allows continual knowledge acquisition while working on the ontology development process, consistent updates can be difficult for developers. Ninth, METHONTOLOGY demands that developers complete various documents during the conceptualization stage; thus, it can be considered a heavy methodology. Adopting an agile methodology will result in reinforcing active communication among developers and reducing the burden of documentation completion. Finally, this study concludes with contributions and practical implications. No previous research has addressed issues related to METHONTOLOGY from empirical experiences; this study is an initial attempt. In addition, several lessons learned from the development experience are discussed. This study also affords some insights for ontology methodology researchers who want to design a more advanced ontology development methodology.

• Korean Journal of Poultry Science
• /
• v.47 no.3
• /
• pp.159-167
• /
• 2020

This study investigated the effect of different light sources in the poultry house on performance, meat quality, and blood composition of finishing broilers. Two hundred and forty male broilers (1-day-old, 42.2±0.1 g) were divided into three groups and subjected to different light source treatments (incandescent, LED, and fluorescent lamps) from 3 weeks of age (four replications/treatment, 20 birds/replication). After breeding for 6 weeks, the carcass yield and meat quality of broilers with similar body weight (BW; 3.4±0.07 kg) were investigated, and blood components were analyzed. Corn-soybean meal-based feed was provided as starter (CP 22.5%, ME 3,020 kcal/kg), early (CP 18.5%, ME 3,050 kcal/kg), and finishing (CP 18%, ME 3,100 kcal/kg). Performance, carcass yield, meat quality, and blood components were evaluated. BW, BW gain, feed intake, and feed conversion ratio did not show any significant differences among treatments. There was no significant difference on live weight and carcass yield among treatments. There was no significant difference on meat color, shear force, and water holding capacity; however, cooking loss at 17.2% was the highest in the LED treatment (P<0.05). There was no significant difference on blood components except for glucose (blood biochemistry component) among treatments. Glucose was 234.5 mg/dL, 256.9 mg/dL, and 250.1 mg/dL in the three treatments, respectively, with a significant difference between incandescent and LED treatments (P<0.05). These results are used useful as basic data for investigating the effect of lighting in broilers production.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.105-115
• /
• 2012

The detailed proximate, fatty/amino acid, mineral composition, texture, color, chemical and taste compounds of six oysters (four kinds of cultured oysters and two kinds of wild oysters) in Korea were investigated. Length and weight of the shell removed cultured and wild oysters were 4.7~5.1 and 3.0~4.2 cm, and 5.9~9.1 and 2.6~5.5 g, respectively. The proximate compositions were not significantly different between cultured and wild oysters. Amino nitrogen and volatile basic nitrogen content of these ones were 232.8~258.2 and 160.5~213.9 mg/100 g, 9.5~12.0 and 7.8~9.5 mg/100 g, respectively. As a texture characteristic of muscle, shearing force were 95~114 and 105~132 g. Amounts of total amino acids of cultured and wild oysters were 9,004~10,198 and 8,165~8,942 mg/100 g, respectively. Major amino acids and inorganic ions were aspartic acid, glutamic acid, proline, alanine, leucine, phenylalanine, lysine, arginine and K, Na, Ca, Fe, S, P, Zn. Major fatty acids of these ones were 16:0, 18:0, 16:1n-9, 18:1n-9, 22:1n-9, 16:4n-3, 20:5n-3 and 22:6n-3, and there was little difference between the two groups. Amounts of free amino acids of cultured and wild oysters extracts were 1,444~1,620 and 1,017~1,277 mg/100 g, respectively, and major ones were taurine, glutamic acid, glycine, alanine, tryptophan, ornithine and lysine. There is a little difference in glycine, tryptophan, ornithine and arginine contents, but TMAO and TMA contents were low in amount, and were not significantly different between the two groups.

• The Korean Journal of Archival Studies
• /
• no.44
• /
• pp.51-99
• /
• 2015

The purpose of the archival appraisal has gradually changed from the selection of records to the documentation of the society. In particular, the qualitative and quantitative developments of the current digital technology and web have become the driving force that enables semantic acquisition, rather than physical one. Under these circumstances, the concept of 'documentary heritage' has been re-established internationally, led by UNESCO. Library and Archives Canada (LAC) reflects this trend. LAC has been trying to develop a new appraisal model and an acquisition model at the same time to revive the spirit of total archives, which is the 'Whole-of-society approach'. Features of this approach can be summarized in three main points. First, it is for documentary heritage and the acquisition refers to semantic acquisition, not the physical one. And because the object of management is documentary heritage, the cooperation between documentary heritage institutions has to be a prerequisite condition. Lastly, it cannot only documenting what already happened, it can documenting what is happening in the current society. 'Whole-of-society approach', as an appraisal method, is a way to identify social components based on social theories. The approach, as an acquisition method, is targeting digital recording, which includes 'digitized' heritage and 'born-digital' heritage. And it makes possible to the semantic acquisition of documentary heritage based on the data linking by mapping identified social components as metadata component and establishing them into linked open data. This study pointed out that it is hard to realize documentation of the society based on domestic appraisal system since the purpose is limited to selection. To overcome this limitation, we suggest a guideline applied with 'Whole-of-society approach'.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.4
• /
• pp.361-368
• /
• 2021

The objective of this study was to establish technology for removing bacteria with human- and eco-friendly material. Staphylococcus aureus as an important component for balanced equilibrium among microbiomes, was cultured under various concentrations of phosphate. Experimental observation relating to physical properties was performed in an addition of phosphate buffer. Statistically minimum value of size and hardness using atomic force microscope was observed on the matured biofilm at 5 mM concentration of phosphate. As a result of absorbance for the biofilm tagged with dye, concentration of biofilm was reduced with phophate, too. To identify whether this reduction by phosphate at the 5 mM is caused by counter ion or not, sodium chloride was treated to the biofilm under the same condition. To elucidate components of the biofilm counting analysis of the biofilm using time-of-flight secondary ion mass spectrometry was employed. The secondary ions from the biofilm revealed that alteration of physical properties is consistent to the change of extracellular polymeric substrate (EPS) for the biofilm. Viscoelastic characterization of the biofilm using a controlled shear stress rheometer, where internal change of physical properties could be detected, exhibited a static viscosity and a reduction of elastic modulus at the 5 mM concentration of phosphate. Accordingly, bacteria at the 5 mM concentration of phosphate are attributed to removing the EPS through a reduction of elastic modulus for bacteria. We suggest that the reduction of concentration of biofilm induces dispersion which assists to easily spread its dormitory. In conclusion, it is elucidated that an addition of phosphate causes removal of EPS, and that causes a function of antibiotic.