• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.125-130
• /
• 2011

본 논문은 난타 음악과 상호작용하는 햅틱 포스 피드백기술의 활용 가능성을 조사했다. 촉감처리기술을 포함하는 VR기술과 사용자에게 원기둥 객체들과 컵 객체의 터치를 제공하는 햅틱 디바이스를 사용했다. 햅틱 디바이스는 VR 공간에서 터치 모델을 이용하는데 활용되었다. 실험을 위한 Matlab/Simulink와 Handshake의 proSENCE Virtual Touch Toolbox는 프로그램 툴로 사용되었다. 각각 x, y, z축의 움직임을 나타내는데 필요한 함수는 3D로 모델화한 컵속에 물의 자연스런 움직임을 묘사하도록 적용했다. 컵속의 정해진 물의 양은 다른 소리를 갖는다. 실험에서 3D 객체의 외형을 인지하는 것과 터치에 의해서 촉감을 느끼는 것은 Haptic의 인지와 함께 난타음악과 연결하여 표현되었다. 또한, 포인터를 활용해서 VR공간에서 게임이나 콘텐츠 개발이 가능함을 확인하였다.

• 로봇학회논문지
• /
• 제11권3호
• /
• pp.140-145
• /
• 2016

In this paper, we fabricate arrayed-type flexible capacitive touch sensor using liquid metal (LM) droplets (4 mm spatial resolution). Poly-4-vinylphenol (PVP) layer is used as a dielectric layer on the electrode patterned Polyethylene naphthalate (PEN) film. Bonding tests between hydroxyl group (-OH) on the PVP film and polydimethylsiloxane (PDMS) are conducted in a various $O_2$ plasma treatment conditions. Through the tests, we can confirm that non-$O_2$ plasma treated PVP layer and $O_2$ plasma treated PDMS can make a chemical bond. To measure dynamic range of the device, one-cell experiments are conducted and we confirmed that the fabricated device has a large dynamic range (~60 pF).

• 한국항해항만학회지
• /
• 제35권7호
• /
• pp.575-580
• /
• 2011

It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.280-281
• /
• 2009

Piezoelectric vibrators can be good replacements of electric motors to excite touch screen of a mobile device owing to small volume and low power consumption. One problem to be solved yet for real application is larger excitation force or moment than available currently. More efficient excitation by a piezoelectric vibrator could be achieved by operating at one of resonance frequencies of the system, which must also be as close as possible to frequency range where index finger is most sensitive and increasing transmission force or moment at that frequency. In this study, dynamic models are derived for the piezoelectric exciter and an adhesive viscoelastic layer, which connect the exciter to the screen. The adhesive layer is modeled as distributed stiffness by considering its geometric shape to relative to the piezoelectric exciter. Then, equations of motion for the piezoelectric exciter and the adhesive layer are derived using Hamilton's principle. Based on this model, dynamic characteristics of the exciter will be designed to maximize the force or moment transmitted onto the screen structure.

• 한국정밀공학회지
• /
• 제20권8호
• /
• pp.101-107
• /
• 2003

A new mechanical probe for 3-D feature measurement on coordinate measuring machines (CMMs) is presented. The probe is composed of the contact stylus and the three-component force sensor. With the stylus mounted on the force sensor, the probe can not only measure 3-D features, but also detect contact force acting on the stylus tip. Furthermore, the probing direction and the actual contact position can be determined by the relationship among three components of contact force to be detected. In this paper, transformation matrix representing the relationship between the external force acting on the stylus tip and the output voltages of measurement gauges is derived and calibrated. The prototype of probe is developed and its availability is investigated through the experimental setup for calibration test of the probe. A series of experimental results show that the proposed probe can be an effective means of improving the accuracy of touch probing on CMM.

• 한국전문물리치료학회지
• /
• 제31권1호
• /
• pp.29-39
• /
• 2024

Background: Landing from a step or stairs is a basic motor skill but high incidence of lateral ankle sprain has been reported during landing with inverted foot. Objects: This study aimed to investigate the effect of landing height and visual feedback on the kinematics of landing and supporting lower limbs before and after the touch down and the ground reaction force(GRF)s. Methods: Eighteen healthy females were voluntarily participated in landing from the lower (20 cm) and the higher (40 cm) steps with and without visual feedback. To minimize the time to plan the movement, the landing side was randomly announced as a starting signal. Effects of the step height, the visual feedback, or the interaction on the landing duration, the kinematic variables and the GRFs at each landing event point were analyzed. Results: With eyes blindfolded, the knee flexion and ankle dorsiflexion on landing side significantly decreased before and after the touch down. However, there was no significant effect of landing height on the anticipatory kinematics on the landing side. After the touch down, the landings from the higher step increased the knee flexion and ankle dorsiflexion on both landing and supporting sides. From the higher steps, the vertical GRF, anterior GRF, and lateral GRF increased. No interaction between step height and visual feedback was significant. Conclusion: Step height and visual feedback affected the landing limb kinematics independently. Visual feedback affected on the landing side while step height altered the supporting side prior to the touch down. After the touch down, the step height had greater influence on the lower limb kinematics and the GRFs than the visual feedback. Findings of this study can contribute to understanding of the injury mechanisms and preventing the lateral ankle sprain.

• 한국멀티미디어학회논문지
• /
• 제5권6호
• /
• pp.646-654
• /
• 2002

인간의 촉각감지 기능은 주위환경에 대한 중요한 정보를 제공하여 준다. 촉각 정보는 우리의 신체와 외부세계와의 접촉에 따른 위치 정보와 물체를 인지하고 조작하기 위한 감각적 정보 뿐 아니라 위험 여부까지 판단할 수 있는 정보를 제공해 준다. 그러나 촉각은 시각과 청각에 비해 상대적으로 덜 중요한 감각으로 인식되어져 왔으나, 가상현실과 컴퓨터 게임에 있어서는 중요한 역할을 수행할 수 있다. 촉각을 통해 플레이어가 가상 세계의 물체에게 직접 영향을 줄 수도 있고 받을 수도 있는 적극적인 인간 감각이기 때문이다. 본 논문에서는 인간의 촉각의 특성을 조사하고 이를 응용하기 위한 힘 감지 센서를 사용한 연구방법을 제시한다. 또한 실제적인 게임적용을 위하여 간단한 힘 모델링과 구조체 형식을 제안한다. 그 결과 센서 출력을 분석하여 힘의 분포, 크기, 중심을 구하고 이 정보를 응용하여 특정부위에 대한 작용, 반작용을 구현 할 수 있다. 본 결과는 컴퓨터 게임과 가상현실에서 촉각 감지와 응용을 위한 기본 자료로 활용될 수 있다.

• 문화기술의 융합
• /
• 제7권1호
• /
• pp.662-667
• /
• 2021

진동 햅틱 피드백은 최신 터치 디스플레이의 주요한 기능으로, 화면의 인터페이스와 상호 작용할 때 사용자의 조작성 및 몰입감을 크게 향상시킨다. 본 연구에선 정전기력 기반의 메커니즘을 적용하여 강한 진동 출력을 생성할 수 있으면서도, 얇은 평판 타입으로 제작이 가능하여 중대형 디스플레이의 뒷면에 탑재하기에 적합한 진동 햅틱 액추에이터를 제안하고자 한다. 제안된 액추에이터는 방사형 판스프링에 매달려 전기적으로 접지된 Mass를 이격 되어 있는 상하의 전극에 의해 정전기력으로 상하로 교번하여 진동력을 증폭시킬 수 있는 구조로 개발되었다. 성능평가 결과, 개발된 액추에이터가 2개 내장된 Bar-Type 모듈에서 170 Hz에서 최대 3.3g의 우수한 진동 출력을 보여, 중대형 터치 디스플레이에서 햅틱 피드백 제공에 대한 가능성이 확인되었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.410-414
• /
• 2003

In this paper, the virtual-reality system is tried to developed, which controls not only the sense of sight and hearing but also the sense of touch, In order to develope the sense of touch in this study, the stable tactual transaction-system, based on summing up the basic algorithm and theory, is embodied. The hardware of this system consists of the 6DOF haptic interface, a controller and a driver In the case of the software, the proxy algorithm is applied for the force-transaction and the mopping algorithm is used for graphic transaction. In addition to this, the imaginary-device driver is utilized for controlling the system and manager-class is also included in this system to manage the position-change and the like. Consequently, the proxy algorithm Is applied, which makes the system possible to be more stable and prompt with and imaginary object. Moreover, the impulse-algorithm is applied to work out a problem which the tactual transaction-period is different from the graphic transaction-period.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2265-2267
• /
• 2003

In this paper, the virtual reality system is tried to developed, which controls not only the sense of sight and hearing but also the sense of touch, In order to develope the sense of touch in this study, the stable tactual transaction system, based on summing up the basic algorithm and theory is embodied. Especially, the graphic deformation algorithm is developed in realtime with using the deformed FEM. To apply the FEM, a deformed material model is produced and then the graphic deformation with this model is able to force. Finally, the graphic transaction algorithm is deduced by the realtime calculation and simplification because the purpose of this system is to transact in real time. The result of this study is that the proposed system is possible to deform the graphics and transact the haptic in real time in PC. The simulation program has been made to prove this result.