• 제목/요약/키워드: Force Standards

검색결과 334건 처리시간 0.024초

청천시 오수량을 고려한 합류식 하수도 소류력 설계법과 이를 활용한 하수관거 개보수방안 (A combined sewer design method using tractive force considering wastewater flow on non-rainy days and its application for improvement methods of sewer)

  • 지현욱;유성수;송호면;강정희
    • 상하수도학회지
    • /
    • 제34권3호
    • /
    • pp.211-220
    • /
    • 2020
  • When domestic sewage and rainwater runoff are discharged into a single sewer pipe, it is called a "combined sewer system." The sewage design standards in Korea specify the flow velocity based only on the volume of rainfall; therefore, sedimentation occurs on non-rainy days owing to the reduced flow rate and velocity. This sedimentation reduces the discharge capacity, causes unpleasant odors, and exacerbates the problem of combined sewer overflow concentration. To address this problem, the amount of sewage on non-rainy days, not just the volume of rainfall, should also be considered. There are various theories on sedimentation in sewer movement. This study introduces a self-cleansing velocity based on tractive force theory. By applying a self-cleansing velocity equivalent to the critical shear stress of a sand particle, sedimentation can be reduced on non-rainy days. The amount of sewage changes according to the water use pattern of citizens. The design hourly maximum wastewater flow was considered as a representative value, and the velocity of this flow should be more than the self-cleansing velocity. This design method requires a steeper gradient than existing design criteria. Therefore, the existing sewer pipelines need to be improved and repaired accordingly. In this study, five types of improvement and repair methods that can maximize the use of existing pipelines and minimize the depth of excavation are proposed. The key technologies utilized are trenchless sewer rehabilitation and complex cross-section pipes. Trenchless sewer rehabilitation is a popular sewage repair method. However, it is complex because the cross-section pipes do not have a universal design and require continuous research and development. In an old metropolis with a combined sewer system, it is difficult to carry out excavation work; hence, the methods presented in this study may be useful in the future.

선박 접안용 계선주의 안전 강성 평가에 관한 연구 (A Study on the Evaluation of Safety Stiffness from Ship's Mooring Bollards)

  • 유용웅;김승연;이윤석
    • 한국항해항만학회지
    • /
    • 제43권1호
    • /
    • pp.9-15
    • /
    • 2019
  • 계선주는 선박이 계류삭을 고박함으로써 항만의 부두에 계류를 시행할 수 있도록 하는 필수적인 항만의 시설물로서, 부두에 설치되는 계선주는 국내의 항만 및 어항설계기준에서 제시하는 설치 규모와 개수, 재질 및 배치 형상에 따라 설치되고 있다. 그러나 우리나라에서는 선박의 접안 안전성 확보를 위한 계선주의 사용을 위한 관리 기준이 마련되지 않은 실정이다. 본 연구에서는 선박이 부두에 접안 중 계선주에 작용하는 견인력을 포함한 계선주 관련 설계기준을 조사하고, 국내에 현재 설치되는 계선주의 규격별 상세 제원 조사를 토대로 견인력에 따른 선박의 접안 안전성 확보를 위한 계선주의 성능을 분석하였다. 계선주 성능 분석은 견인력에 따른 작용력을 수평방향과 수직방향으로 나누어 각각의 작용력에 의해 계선주에 작용하는 각각의 응력으로 구분하여 평가하였다. 국내 계선주에 대한 성능 평가를 위해 상세 제원조사 결과를 바탕으로 한계 강도 245Mpa을 산출하고 각각의 응력과 비교하여 적정성 평가를 시행하고 한계 성능에 도달하는 제원을 산출하였으며 산출 결과 현재 국내에 설치되는 계선주에 규격별 견인력에 따른 작용 응력은 최소 150Mpa 이하로 산출되어 한계 강도의 60% 수준으로 성능을 만족한 것으로 평가되었다. 향후 이러한 계선주 상세 제원에 따른 성능 평가 방법은 계선주 제원에 따른 부두에 접안하는 선박에 대한 계선주의 적정성 및 사용에 따른 계선주 상세 제원 변화에 대한 관리 기준 개발에도 활용될 것으로 기대된다.

구조물 내진보강을 위한 다중 마찰댐퍼의 성능 평가 (Performance Evaluation of Multi-Friction Dampers for Seismic Retrofitting of Structures)

  • 김성배;권형오;이종석
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권6호
    • /
    • pp.54-63
    • /
    • 2022
  • 이 연구는 구조물 내진보강 장치의 하나인 마찰댐퍼에 관한 것으로, 내부 마찰재를 복합재료의 일종인 초고분자량 폴리에틸렌으로 대체하여 댐퍼를 개발하였다. 또한 마찰력이 발생하는 내부 구조를 여러 층으로 적층하는 다중 마찰방식을 적용하였다. 개발된 다중 마찰댐퍼의 성능 검증을 위해서 재료에 대한 기초 물성과 마모 특성, 디스크 스프링에 대한 특성 분석 시험을 수행하였다. 마모시험 시험결과, UHMWPE의 질량 감소율은 0.003%로 복합재료 기반의 마찰재 중에서 가장 우수한 성능을 보였다. 디스크 스프링은 유한요소해석과 시험결과로부터 설계기초자료를 확보하였다. 또한 개발된 다중 마찰댐퍼의 품질 안정성을 확인하기 위해 토크값에 따른 마찰력 변화와 감쇠장치에 대한 지진하중 시험을 수행하였다. 품질성능 시험결과, 토크 값 조절에 따라 선형적인 마찰력 변화를 보였으며, 지진하중 시험 결과, 마찰댐퍼의 허용오차는 설계기준에서 요구하는 15% 미만으로 나타나 내진보강 장치로서의 요구조건을 만족하는 것으로 나타났다.

국제항공법상 화물.수하물에 대한 운송인의 책임상한제도 - 미국의 판례 분석을 중심으로 - (The Limitation of Air Carriers' Cargo and Baggage Liability in International Aviation Law: With Reference to the U.S. Courts' Decisions)

  • 문준조
    • 항공우주정책ㆍ법학회지
    • /
    • 제22권2호
    • /
    • pp.109-133
    • /
    • 2007
  • The legal labyrinth through which we have just walked is one in which even a highly proficient lawyer could easily become lost. Warsaw Convention's original objective of uniformity of private international aviation liability law has been eroded as the world community ha attempted again to address perceived problems. Efforts to create simplicity and certainty of recovery actually may have created less of both. In any particular case, the issue of which international convention, intercarrier agreement or national law to apply will likely be inconsistent with other decisions. The law has evolved faster for some nations, and slower for others. Under the Warsaw Convention of 1929, strict liability is imposed on the air carrier for damage, loss, or destruction of cargo, luggage, or goods sustained either: (1) during carriage in air, which is comprised of the period during which cargo is 'in charge of the carrier (a) within an aerodrome, (b) on board the aircraft, or (c) in any place if the aircraft lands outside an aerodrome; or (2) as a result of delay. By 2007, 151 nations had ratified the original Warsaw Convention, 136 nations had ratified the Hague Protocol, 84 had ratified the Guadalajara Protocol, and 53 nations had ratified Montreal Protocol No.4, all of which have entered into force. In November 2003, the Montreal Convention of 1999 entered into force. Several airlines have embraced the Montreal Agreement or the IATA Intercarrier Agreements. Only seven nations had ratified the moribund Guatemala City Protocol. Meanwhile, the highly influential U.S. Second Circuit has rendered an opinion that no treaty on the subject was in force at all unless both affected nations had ratified the identical convention, leaving some cases to fall between the cracks into the arena of common law. Moreover, in the United States, a surface transportation movement prior or subsequent to the air movement may, depending upon the facts, be subject to Warsaw, or to common law. At present, International private air law regime can be described as a "situation of utter chaos" in which "even legal advisers and judges are confused." The net result of this barnacle-like layering of international and domestic rules, standards, agreements, and criteria in the elimination of legal simplicity and the substitution in its stead of complexity and commercial uncertainty, which manifestly can not inure to the efficient and economical flow of world trade. All this makes a strong case for universal ratification of the Montreal Convention, which will supersede the Warsaw Convention and its various reformulations. Now that the Montreal Convention has entered into force, the insurance community may press the airlines to embrace it, which in turn may encourage the world's governments to ratify it. Under the Montreal Convention, the common law defence is available to the carrier even when it was not the sole cause of the loss or damage, again making way for the application of comparative fault principle. Hopefully, the recent entry into force of the Montreal Convention of 1999 will re-establish the international legal uniformity the Warsaw Convention of 1929 sought to achieve, though far a transitional period at least, the courts of different nations will be applying different legal regimes.

  • PDF

한국형 전술수송기의 적정 개발 규모와 의사결정 영향집단별 AHP조사 분석에 관한 연구 (A Study for the Optimal Development Strategy of Air Cargo in Size and AHP Survey Analysis of Each Potential Decision-Making Group)

  • 정병호;김익기
    • 한국국방경영분석학회지
    • /
    • 제34권3호
    • /
    • pp.31-40
    • /
    • 2008
  • 항공기 제작산업은 고부가가치일 뿐만 아니라 국가적인 수출 유망산업으로서 현재 매년 수십억 달러에 달하는 항공기 부문의 무역 적자를 개선하기 위하여 반드시 이루어야할 사업이다. 현재 국내 항공 산업은 최초 아음속항공기인 KT-1을 시작으로 최초 초음속 항공기인 T/A-50 개발에 이르기까지 눈부신 발전을 이루고 있으며, 실전 배치와 국내외 각종 에어 쇼에서 그 우수성을 인정받고 있다. 현재도 계속 진행되고 있는 차기 전투기 사업이나 공격헬기사업 등을 고려한다면, 차세대 국내수송기 개발 전망은 매우 밝은 편이다. 또한, 공군 해외파병의 역사가 월남전부터 대테러전과 최근의 이라크 자유 작전까지 수송기를 이용한 항공수송이 주 임무가 되었던 점을 감안한다면, 장래 우리 군과 국산 수송기의 우수성을 알릴 수 있는 기회 또한 많을 것으로 판단된다. 본 연구는 우리나라에서 수송기를 개발할 경우 적정 규모에 대해서 AHP기법을 이용하여 알아보고자 하는 목적에서 시작되었다. 평가는 한국형 중형 여객기 개발 규모 연구에 적용되었던 평가기준을 근거로 운용성, 경제성, 기술성, 안전성, 환경친화성의 5가지 기준으로 결정하였으며 세부 평가기준은 군 수송기에 적합하도록 관련 문헌을 참고하여 적용하였다. 의사결정 집단은 현장의 수송기를 운용하고 항공기를 제작하는 현장의 목소리를 가장 잘 대변할 수 있는 전문형 실무자로서의 적합성을 기준으로 하여 5년 이상의 실무경험을 가진 수송기 조종사, 수송장교, KAI의 과장급 실무자로 선정하였다.

IOT 기반 건축물 유지관리 플랫폼 구축(S-LCC) 방안 : 기능구성과 계측 데이터 활용을 위한 개념 모델을 중심으로 (A Plan for Establishing IOT-based Building Maintenance Platform (S-LCC): Focusing a Concept Model on the Function Configuration and Practical Use of Measurement Data)

  • 박태근
    • 한국산학기술학회논문지
    • /
    • 제21권2호
    • /
    • pp.611-618
    • /
    • 2020
  • 건축물의 LCC 분석 결과의 신뢰성은 정확한 분석 절차와 불확실성이 제거된 데이터에 의해서 결정된다. 그러나 지금까지는 이 데이터를 자동으로 계측하고 DB화 할 수 있는 시스템들이 실용화되지 못하였다. 이에 본 연구에서는 4차 산업혁명의 핵심도구인 IOT를 활용하여 설비시스템의 전기에너지 소모량 데이터를 자동으로 수집하여 분석하고, 분석된 결과들을 활용하여 설비시스템의 효율적 운전이 가능한 S-LCC 플랫폼의 개념모델을 제안하였다. 제안된 개념 모델은 기존의 유지관리 시스템(BLCS)에 IOT를 융합하여 모델링되었으며, 이것은 시설물관리모듈, LCC분석모듈, 에너지사용량 관리모듈, 상태효율분석모듈, 유지보수기준재설정모듈 등 5개의 세부 모듈로 구성되어야 업무프로세스가 효율화될 수 있다. 이 시스템에서 도출하는 LCC분석결과를 활용하여 설비시스템의 노후화 상태를 실시간으로 파악할 수 있으며, 또한 기존설비의 보수율과 교체주기, 수명 등에 관한 기준들을 재설정하고, 신규설비의 유지관리기준을 새롭게 설정하는 기초자료로 활용될 수 있다. S-LCC 플랫폼이 구축될 경우, LCC 분석의 신뢰성 증대, 자료입력을 위한 노동력 절감, 정확성 제고 등의 효과뿐만 아니라 지금까지 버려졌던 데이터를 잠재가치가 큰 빅 데이터로 바꿀 수 있다.

2010년 STCW 개정협약의 주요 내용과 교육계의 대응 (A Study on the Review and Countermeasure for 2010 Amended Convention of the STCW)

  • 윤명오;성유창
    • 해양환경안전학회지
    • /
    • 제16권3호
    • /
    • pp.295-300
    • /
    • 2010
  • 1978년 STCW 협약은 해기사의 직무능력에 대한 국제적 최저 기준으로 제정되었으며 인적요인에 의해 발생되는 해양사고를 감소시키는 데 기여해왔다. STCW 협약은 선박의 운항환경 변화에 따라 부분적으로 수정되어 왔으며 1995년에 대폭적인 협약의 개정이 이뤄졌다. 이러한 개정 이 후에도 선박은 지속적으로 대형화, 고속화되어 왔을 뿐만 아니라 많은 첨단 기술이 도입되어 과거의 선박에 비하여 선박의 운항환경에 많은 변화가 있었다. 이러한 변화에 따라 선박을 운항할 해기사의 교육훈련 과정과 면허에서 확인되어야 할 직무능력에 대한 기준도 변화시켜야 할 필요성이 제기되었고, 이에 따라 2006년부터 STW 소위원회는 협약의 개정에 대해 논의를 시작하였으며 그 결과 2010년 6월 필리핀의 마닐라에서 개최된 외교회의에서 협약의 개정이 이뤄졌다. 이번 개정에서는 선박의 보안, 전자해도, 리더십 등에 대한 교육 훈련이 추가되었으며 본 연구는 최근에 개정된 협약의 내용을 정리하고, 이에 대한 해기교육 기관의 대응방안을 살펴보았다.

지구기후변화 방지를 위한 유럽연합(EU) "신규 승용차 이산화탄소 배출 감축 규칙"에 대한 고찰 (A Study on the EU Regulation for Reducing CO2 from New Passenger Cars to Prevent Climate Change)

  • 박명섭;한낙현;김상만
    • 무역상무연구
    • /
    • 제63권
    • /
    • pp.159-184
    • /
    • 2014
  • Climate change is one of the biggest dangers facing all living creatures in the earth. It has been understood that emissions of greenhouse gases from human activity is the cause of climate change. Cars are responsible for around 12% of total EU emissions of CO2, the main greenhouse gas. The United Nations Framework Convention on Climate Change (UNFCCC or FCCC) is an international environmental treaty adopted at the United Nations Conference on Environment and Development (UNCED) on 9 May, 1992, which entered into force on 21 March 1994. The European Commission first adopted a Community Strategy to reduce CO2 emissions from cars in 1995. On 19 December 2007, the European Commission proposed "Proposal for Setting emission performance standards for new passenger cars to reduce CO2 emissions", which was adopted on 23 April 2009 as "Regulation (EC) No 443/2009". Prior to submitting the Proposal, the European Commission performed impact assessment and prepared impact assessment report which was reviewed by the Impact Assessment Board. The objective of this Regulation is to set emission performance standards for new passenger cars registered in the Community, which forms part of the Community's integrated approach to reducing CO2 emissions from light-duty vehicles while ensuring the proper functioning of the internal market. In the event that a manufacturer fails to meet its target, it will be required to pay an excess emissions premium in respect of each calendar year from 2012 onwards. On 11 March 2014, Regulation (EC) No 333/2014 amending Regulation (EC) No 443/2009 was adopted. Regulation (EC) No 333/2014 amends Regulation (EC) No 443/2009 to implement the modalities of meeting the 95g CO2/km target for new passenger cars to be reached in 2020. As industry benefits from indications of the regulatory regime that would apply beyond 2020, the Regulation includes a further review to take place by, at the latest, 31 December 2014.

  • PDF

차량과 콘크리트 교각의 직접충돌해석법과 충돌하중이력곡선을 이용한 간접충돌해석법 비교연구 (A Comparison Study of Direct Impact Analysis of Vehicle to Concrete Pier and In-Direct Impact Analysis using Load-Time History Functions)

  • 김우석;김경진;이재하
    • 한국전산구조공학회논문집
    • /
    • 제27권6호
    • /
    • pp.533-542
    • /
    • 2014
  • 본 연구에서는 차량과 교각의 직접충돌해석을 통하여 기존 설계기준(도로교설계기준, AASHOTO LRFD)에서 아직 고려하고 있지 않은 동적영향을 고려한 실제 교각의 충돌 파괴 거동을 다양한 경계조건별로 검토하였다. 선정된 차량은 10톤, 16톤, 38톤의 Cargo 트럭이며 교각은 경부고속도로 상 일반적인 제원으로 선정하였다. 해석결과 가장 많은 파괴는 상부구조의 고려없이 교각의 상부면을 구속하였을 시에 발생하였으며 상부구조는 2차적인 영향을 교각에 전달하기 보다는 충돌에너지를 일부 흡수하는 역할을 하며 파괴를 감소시키는 것으로 확인되었다. 또한 해석의 효율성을 위해 차량과 강체간 충돌시 발생하는 충돌하중이력곡선을 교각에 외력으로 부여한 간접충돌해석을 수행하고, 이를 직접충돌해석 결과와 비교하였다. 해석 결과 직접충돌해석 결과와 매우 유사하게 교각의 거동을 예측하는 것으로 확인되었으며 해석효율성 또한 높아져 해석시간은 약 92%정도 감소하였다. 이러한 간접충돌해석법은 다양한 기존 모델이나 다른 해석프로그램에도 쉽게 부여될 수 있어 그 활용범위가 증가할 것으로 판단된다.

내진해석 조건에 따른 도로터널 내진성능평가에 관한 연구 (A Study on Seismic Performance Evaluation of Road Tunnel according to Seismic Analysis Conditions)

  • 최병일;김찬희;노은철;하명호;박시현
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제25권5호
    • /
    • pp.127-134
    • /
    • 2021
  • 안정된 지반에 터널건설시 단계별 굴착, 지보재 설치 과정 등에서 지반에 응력변화가 발생하게 된다. 공용중인 구조물의 안전성평가를 위해 시설물의 안전 및 유지관리 실시 세부지침(2019)에서는 굴착단계를 반영한 수치해석을 수행하도록 제시되어 있다. 그러나 내진성능평가의 경우 명확한 방법이 제시되지 않았다. 따라서 본 연구에서는 해석방법을 달리하여 수치해석을 수행하고 결과 값을 비교·분석 하였다. 수치해석 결과, 수평방향으로 작용한 지진파에 따른 변위 값은 해석방법에 따른 차이점을 찾을 수 없었다. 하지만 굴착터널의 안전성평가 항목인 부재력 평가결과 평가 방법에 따라 결과 값이 큰 차이가 나타났으며, 강도설계법으로 검토시 철근 유·무에 따라 구조물이 안전성을 만족하지 못하는 형태로 검토 될 수 있는 것을 확인할 수 있었다. 이런 연구결과를 토대로 해석방법을 명확히 제시하고 관련 기준에 반영하는 것을 제안한다.