• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.2163-2166
• /
• 2004

For designing high Tc superconductor proceeding bearing(HTSJB) which is used on a flywheel energy storage system which requests the free of the bearing loss caused by the friction, it is necessary to understand the basic characteristics of the classical superconductor proceeding bearing because the mechanical characteristics of the HTSJB are identified by the magnetic relationships between the permanent magnet(PM) and the high Tc superconductor(HTS). In this paper, using the method, frozen image model, the force problems between the PM and the HTS were solved and then the dynamic characteristics of the rotor inside of the HTSJB can be expected in advance by using the basic characteristics between the PM and the HTS. The coefficient of friction of the HTSJB was measured in the vacuum environment. From the results, the mechanical characteristics of HTSJB can be identified using the numerical models.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.2
• /
• pp.28-33
• /
• 2003

This study is performed to evaluate and design the dynamic characteristics of the onboard machinery with resilient mounts. To avoid resonance with onboard machinery and external force, it is necessary to calculate natural frequencies of the resilient mounting system more accurately. Natural frequencies of on board machinery are determined by rigid body properties(mass, moment of inertia, center of mass) of machinery and stiffness of mounts. But it is very difficult to calculate rigid body properties theoretically. And stiffness properties of rubber mounts vary with dynamic displacement, pre load, frequency and temperature, and so on. In this study, we have identified rigid body properties using experimental modal analysis and estimated dynamic stiffness of rubber mount for onboard machinery using measured vibration response during seatrial. We measured displacement excitation through deck under mounts and evaluated relationship between modes of resilient mounting system and main excitation sources of a ship.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.1
• /
• pp.83-94
• /
• 1999

본 연구에서는 시스템의 해석적 모델과 측정된 응답을 이용하여 입력하중을 추정하는 역해석 기법을 유한요소모델과 같은 해석적 모델을 알고 있는 경우와 주파수응답함수와 같은 실험적 모델을 알고 있는 경우에 대하여 제시하였으며 이때 발생되는 수학적 악조건의 특성을 규명하였다. 역해석시 발생되는 수학적 악조건은 시스템의 동강성행렬과 측정위치에 의해 결정되는 특성행렬의 조건수에 따라 결정되며 역해석기법을 공학문제에 적용하기 위하여는 특성행렬의 조건수가 낮아지도록 주자유도 및 측정점을 선택하여야 하고 특히 공진영역 및 반공진영역에서는 필연적으로 악조건이 발생됨을 알 수 있었다. 수학적 악조건의 특성을 명확히 규명하기 위하여 간단한 수치해석을 통하여 그 결과를 제시하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.9 s.252
• /
• pp.1094-1101
• /
• 2006

Recently, a ultra-precision stage is widely used in the fields of the nano-technology, specially in AFMs(Atomic Force Microscope) and STMs(Scanning Tunneling Microscope). In this paper, the ultra-precision stage which consists of flexure hinges, piezoelectric actuator and ultra-precision linear encoder, is designed and developed. The system transfer function of the ultra-precision stage system was derived from the step responses of the system using system identification tool. A $H_{\infty}$ controller was designed using loop shaping method to have robustness for the system uncertainty and external disturbances. For the designed controller, simulations were performed and it was applied to the ultra-precision stage system. From the experimental results it was found that this stage could be controlled with less than 5nm resolution irrespective of hysteresis and creep.

• 한국IT서비스학회:학술대회논문집
• /
• 2006.05a
• /
• pp.223-229
• /
• 2006

최근 각광받고 있는 RFID(Radio Frequency Identification) 기술은 물류, 유통 및 자산관리 분야를 중심으로 그 적용 사례들이 늘고 있다. 본 사례는 정보통신부의 IT839정책의 일환으로 RFID분야의 기술 및 산업 확산을 위해 한국전산원이 주관하여 추진한 2005년도 선도사업 중 하나인 공군 신무기(F-15K) 자산관리시스템 구축사업에 대한 것이다. 이 시스템의 구축을 통해 공군은 군수물자의 정확한 도입현황 파악이 가능하게 되었고, 보유 자산의 현황 및 저장위치 파악이 실시간 가능해졌으며, 수령, 저장, 발송, 재고관리 등 기존의 업무 처리 방식을 간소화하여 업무 소요시간 및 인력을 절감할 수 있었다.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.54-60
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square(RLS) modeling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for the on-line system identification and monitoring of an end-milling for this purpose. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF(Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.3
• /
• pp.73-79
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square modelling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for on-line end-milling identification. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF (Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.3
• /
• pp.23-33
• /
• 2012

Dynamic response measurements from natural excitation were carried out for three 18-story office buildings to determine their inherent properties. The beam-column frame system was adopted as a typical structural form, but a core wall was added to resist the lateral force more effectively, resulting in a mixed configuration. To extract modal parameters such as natural frequencies, mode shapes and damping ratios from a series of vibration records at each floor, the most advanced operational system identification methods based on frequency- and time-domain like FDD, pLSCF and SSI were applied. Extracted frequencies and mode shapes from the different identification methods showed a greater consistency for three buildings, however the three lower frequencies extracted were 1.2 to 1.7 times as stiff as those obtained using the initial FE models. Comparing the extracted fundamental periods with those estimated from the code equations and FE analysis, the FE analysis results showed the most flexible behavior, and the most simple equation that considers the building height as the only parameter correlated fairly well with test results. It is recognized that such a discrepancy arises from the fact that the present tests exclude the stiffness decreasing factors like concrete cracking, while the FE models ignore the stiffness increasing factors, such as the contribution of non-structural elements and the actual material properties used.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.395-402
• /
• 2011

The nanomechanical properties of fully lithiated and unlithiated silicon nanowire deposited on silicon substrate have been studied with atomic force microscopy. Silicon nanowires were synthesized using the vapor-liquid-solid process on stainless steel substrates using Au catalyst. Fully lithiated silicon nanowires were obtained by using the electrochemical method, followed by drop-casting on the silicon substrate. The roughness, derived from a line profile of the surface measured in contact mode atomic force microscopy, has a smaller value ($0.65{\pm}0.05$ nm) for lithiated silicon nanowire and a higher value ($1.72{\pm}0.16$ nm) for unlithiated silicon nanowire. Force spectroscopy was utilitzed to study the influence of lithiation on the tip-surface adhesion force. Lithiated silicon nanowire revealed a smaller value (~15 nN) than that of the Si nanowire substrate (~60 nN) by a factor of two, while the adhesion force of the silicon nanowire is similar to that of the silicon substrate. The elastic local spring constants obtained from the force-distance curve, also shows that the unlithiated silicon nanowire has a relatively smaller value (16.98 N/m) than lithiated silicon nanowire (66.30 N/m) due to the elastically soft amorphous structures. The frictional forces of lithiated and unlithiated silicon nanowire were obtained within the range of 0.5-4.0 Hz and 0.01-200 nN for velocity and load dependency, respectively. We explain the trend of adhesion and modulus in light of the materials properties of silicon and lithiated silicon. The results suggest a useful method for chemical identification of the lithiated region during the charging and discharging process.

• Korean Security Journal
• /
• no.24
• /
• pp.125-146
• /
• 2010

The G20 summit is the premier forum for international economic cooperation and it will be held in Seoul in November 2010. However, protests are expected during the Seoul summit, as a part of the deepening global war against capitalism. The Korean Police need to deal with these protests effectively in order to provide security to the participating leaders and make the meeting run on wheel as planned. The current study attempts to analyze the death of Ian Tomlinson who died in the context of a heavily policed protest during 2009 G20 London summit. There are number of unique features regarding this incident, such as the public scrutiny of police conduct through video footage, the police use of excessive force, and the process to hold the police to account for misconduct. This incident caused serious damages to the public's faith in the British police. Based on the analysis, this study found that during the G20 London summit British police had the problems such as the lack of the clear standards on the use of force, improper training in the use of force, poor communications with the media and protesters, inappropriate use of the close containment tactic, and the failure to display police identification. Therefore, this study suggests the inducement of peaceful protests, the adoption of a set of standards on the use of force, public order training that is more directed and more relevant to the public order challenges facing the Korean police, improvement of the communication with the media and protesters, enhancement of individual officer's accountability as public order policing strategies for G20 Seoul summit meeting. However, the most fundamental principle is that Korean police must place a high value on tolerance and winning the consent of the public.