• Journal of the Semiconductor & Display Technology
• /
• v.3 no.2
• /
• pp.23-26
• /
• 2004

Thin film is one of the most general structures used in micro-electro-mechanical systems (MEMS). To measure the mechanical properties of SU-8 film, tensile testing was adopted which offers not only elastic modulus but also yield strength and plastic deformation by load-displacement curve. Tensile testing system was constructed with linear guided servo motor for actuation, load cell for force measurement and dual microscope for strain measurement.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.125-128
• /
• 2005

The equipments in semi-conductor, display and measurement fields require high precision and resolution positioning technology. High positioning control can be carried out by using linear motors with little vibration, backlash and friction. In this paper, the acceleration patterns of the moving Part are analyzed to obtain the optimum pattern which leads to the less vibration reduction of equipment. In addition, the effect of friction force in guide rail on position control accuracy is investigated to identify possibility of using current bearing system for nano-positioning control.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.27-30
• /
• 2007

The gigahertz oscillator behavior of double-walled boron-nitride nanotube (BNNT) was investigated by using classical molecular dynamics simulations. The BNNT oscillator characteristics were compared to carbon-nanotube (CNT) and hybrid-C@BNNT oscillators. The results show that the BNNT oscillators are higher than the van der Waals force of the CNT oscillator. Since the frictional effects of BNNT oscillators are higher than that of a CNT oscillator, the damping factors of BNNT and hybrid oscillators are higher than that of a CNT oscillator.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.3
• /
• pp.27-29
• /
• 2004

The responses of hypothetical silicon nanotubes under torsion have been investigated using an atomistic simulation based on the Tersoff potential. A torque, proportional to the deformation within Hooke's law, resulted in the ribbon-like flattened shapes and eventually led to a breaking of hypothetical silicon nanotubes. Each shape change of hypothetical silicon nanotubes corresponded to an abrupt energy change and a singularity in the strain energy curve as a function of the external tangential force, torque, or twisted angle. The dynamics of silicon nanotubes under torsion can be modelled in the continuum elasticity theory.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.79-84
• /
• 2013

Nanoimprint lithography (NIL) is the next generation photolithography process in which the photoresist is dispensed onto the substrate in its liquid form and then imprinted and cured into a desired pattern instead of using traditional optical system. There have been considerable attentions on NIL due to its potential abilities that enable cost-effective and high-throughput nanofabrication to the display device and semiconductor industry. Although one of the current major research trends of NIL is large-area patterning, the technical difficulties to keep the uniformity of the residual layer become severer as the imprinting area increases more and more. In this paper, with the rolling type imprinting process, a mold, placed upon the $2^{nd}$ generation TFT-LCD glass sized substrate($370{\times}470mm^2$), is rolled by a rubber roller to achieve a uniform residual layer. The prediction of residual layer thickness of the photoresist by rolling of the rubber roller is crucial to design the rolling type imprinting process, determine the rubber roller operation conditions-mpressing force & feeding speed, operate smoothly the following etching process, and so forth. First, using the elasticity theory of contact problem and the empirical equation of rubber hardness, the contact length between rubber roller and mold is calculated with consideration of the shape and hardness of rubber roller and the pressing force to rubber roller. Next, using the squeeze flow theory to photoresist flow, the residual layer thickness of the photoresist is calculated with information of the viscosity and initial layer thickness of photoresist, the shape of mold pattern, feeding speed of rubber roller, and the contact length between rubber roller and mold previously calculated. Last, the effects of rubber roller operation conditions, impressing force & feeding speed, on the residual layer thickness are analyzed with consideration of the shape and hardness of rubber roller.

• Journal of Biomedical Engineering Research
• /
• v.9 no.2
• /
• pp.233-238
• /
• 1988

Human body sways continuously to maintain balance during upright stance. A computer-aided instrumentation system using a force platform has been developed to investigate the body balance. The Kistler force platform and amplifiers were only used to obtain the precise measurements, and the data acquisition and analysis software operating on an IBM PC with A/D converter was developed. This study presents methods for the display of platform center of pressure data on stability study. This system can be used as a tool in evaluating the man's ability to balance and disorders of the nervous system.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.134-140
• /
• 2003

The film sensor is used for measuring pressure distribution at planar area, especially at a small space or gap. The present paper deals with the development of film type sensors and system for pressure distribution measuring. The developed system is consist of (1)film sensor with 40/sup */40 array, (2)PCI interface card with maximum sampling rate of 100㎐, and (3)software for data processing and real-time display. The contact pressure test of wiper blade and front glass of vehicle was performed with wiper blade by 40cm. Generally spring force of wiper arm is designed at 0.7∼1kN. Test results of total force was 9.4N and 7.1N in each driver and passenger toward. The paper suggested possibility for base definition in wiper design. A windshield wiper blade experiment revealed that the system successfully measured the contact force distribution during static state, showing the usefulness of the developed system.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.3
• /
• pp.149-154
• /
• 2002

In this paper, we propose a new graphic deformation algorithm for haptic interface system. Our deformable model is based on non-linear elasticity, anisotropy behavior and the finite element method. Also we developed controller for high-speed communication. The proposed controller is based on the PCI/FPGA technology, which could progress the capability of the position calculating and the force data transmitting. The haptic system is composed of the 6DOF force display device, the high-speed controller, HIR library for 3D graphic deformation algorithm and the haptic rendering algorithm. The developed system will be used on constructing the dynamical virtual environment. We demonstrate the relevance of this approach for the real-time simulating deformations of elastic objects. To show the efficiency of our system, we programmed the simulation of force reflecting. As the result of experiment, we found that it has high stability and easy to control for deformable object than some other systems.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.4
• /
• pp.181-185
• /
• 2014

We investigated the structural, electrical and optical characteristics of IGZO thin films deposited by a room-temperature RF reactive magnetron sputtering. The thin films deposited were annealed for 2 hours at various temperatures of 300, 400, 500 and $600^{\circ}C$ and analyzed by using X-ray diffractometer, transmission electron microscopy, atomic force microscope and Hall effects measurement system. The films annealed at $600^{\circ}C$ were found to be crystallized and their surface roughness was decreased from 0.73 nm to 0.67 nm. According to XPS measurements, concentration of oxygen vacancies were decreased at $600^{\circ}C$. Optical band gap were increased to 3.31eV. The carrier concentration and Hall mobility were sharply increased at 600oC. Our results indicate that the IGZO films deposited at a room temperature can show better thin film properties through a heat treatment.

• The Southeast Asian review
• /
• v.21 no.1
• /
• pp.137-184
• /
• 2011

This article is aimed at understanding the political narratives represented in the National Museum of Indonesia. Starting initially as a colonial museum, the National Museum of Indonesia functioned as a useful tool for the Dutch colonial force to fuel its imaginations of the colonial territory and the people within it. The Dutch used the cultural display to advertize its benevolent colonial rule. All the while, the museum also inevitably reflected orientalism on the people and the culture of the colony. The republic of Indonesia inherited the colonial museum's practices and its display patterns. The business surrounding the museum also played a key role in the newly-born nation-state laying out a future for its redefined territory and people. Thus, what the colonial force imagined for the colonial territory through the study of museum displays was rather directly transferred to the republic without serious consideration of the decolonization process. Four main characteristics have been seen in the museum displays. The first is an emphasis on the glorious Hindu-Buddha history, from which numerous temples, statues, and jewelry have been found. Secondly, the Islamic period, which spanned between the Hindu-Buddha times to the colonial era, has almost completely been eliminated from the display. Third, the colonial era has been depicted as the time of Europe's exportation of scientific tools and adaption of sophisticated living patterns. Fourth, the images of ethnic groups were represented as being stagnant without reflecting any challenges and responses that these groups had faced throughout history. Looking at these display patterns, it can be concluded that all the dynamic internal developments and anti-colonial resistance that took place during the Islamic and Colonial Era have simply not been represented in the museum display. These display patterns do not reflect the real history or culture of the archipelago. Two considerations are thought to have influenced the neglecting of social realities in the display. The first of which is the Dutch's and Republic's apprehension over the possible political upheaval by the Islamic forces. Yet, more fundamentally, cultural displays themselves are distinct from historical education in that the former pays more attention to business ideas with an aim to attract tourists rather than to project objective historical knowledge. Thus, in cultural displays, objects which work to stimulate fantasies and spur curiosity on archipelagic culture tend to be selected and emphasized. In this process, historical objectivity is sometimes considered less vital. Cultural displays are set up to create more appealing narratives for viewers. Therefore, if a narrative loses its luster, it will be replaced by another flashy and newly-resurrected memory. This fact reveals that museums, as transmitters of historical knowledge, have a certain degree of limitation in playing their role.