• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.4
• /
• pp.293-301
• /
• 2017

A Sub-kWe small-scale experimental test loop was manufactured to investigate characteristics of the supercritical carbon dioxide power cycle. A high-speed turbo-generator was also designed and manufactured. The designed rotational speed of this turbo-generator was 200,000 rpm. Because of the low expansion ratio through the turbine and low mass flowrate, the rotational speed of the turbo-generator was high. Therefore, it was difficult to select the rotating parts and design the turbine wheel, axial force balance and rotor dynamics in the lab-scale experimental test loop. Using only one channel of the nozzle, the partial admission method was adapted to reduce the rotational speed of the rotor. This was the world's first approach to the supercritical carbon dioxide turbo-generator. A cold-run test using nitrogen gas under an atmospheric condition was conducted to observe the effect of the partial admission nozzle on the rotor dynamics. The vibration level of the rotor was obtained using a gap sensor, and the results showed that the effect of the partial admission nozzle on the rotor dynamics was allowable.

• Proceedings of the KSEEG Conference
• /
• 2002.10a
• /
• pp.53-67
• /
• 2002

As in the past, we are concerned today with the magnitudes of mineral resources and the adequacy of these resources to meet future needs. In looking at global resource issues, we should consider the need for the resource, its supply, and the environmental consequences of using it. The need for a resource can become a resource dependency, specially as the global population expands and each of us becomes Increasingly dependent upon hundreds of natural materials. Therefore, our great mineral consumption makes the human population a true “Geologic Force”, which will be even more significant in the future when the global population is projected to reach alarming proportions. Although our supplies of mineral resources probably will be sufficient for the 21st century, the uneven distribution of minerals in the Earth's crust almost certainly will continue to be a major problem. The most likely result will be major shifts in both prices and sources of supply of many mineral resources. As for energy resources, we must avoid an obsessive dependency on one fuel and expand instead to other energy resources. Finally, because the use of resources affects the environment, we need to focus on resource exploitation and global pollution, particularly in regard to ground water and arable land. We must manage our resources so as to be in balance with our environment. And the accelerated industrialization of South Korean economy over the last three decades has resulted in the mass consumption of mineral commodities. South Korea has around 50 useful mineral commodities for the mineral industry, among 330 kinds of minerals described. The component ratio of the mining industry sector of the gross national production(GNP) in South Korea dropped from 1.2% in 1971 to 0.34% in 1997 due to the rapid growth of other industries in the country. During the period from 1971 to 1997, the average growth rate of mineral consumption in South Korea was 9.13% yearly and that of GMP per capita was 14.97%. The mineral consumptions per capita showed a continual increase during the last 30 years as follows(parenthesis: GW per capita); 0.99 metric tons in 1997($289), 3.83 metric tons in 1989($5, 210), 6.11 metric tons in 1995 ($10, 037), and 6.66 metric tons in 1997($9, 511). The total amount of mineral consumption in South Korea was 33 million tons of 32 mineral commodities in 1971, and 306 million metric tons of 47 mineral commodities in 1997.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.712-722
• /
• 2018

This paper conducts parametric studies on flapping wing design, one of the most important design parameters of insect-mimicking aerial vehicles. Experimental study on wing shape was done through comparison and analysis of thrust, pitching moment, power consumption, and thrust-to-power ratio. A two-axis balance and hall sensor measure force and moment, and flapping frequency, respectively. Wing configuration is biplane configuration which can develop clap and fling effect. A reference wing shape is a simplified dragonfly's wing and studies on aspect ratio and wing area were implemented. As a result, thrust, pitching moment, and power consumption tend to increase as aspect ratio and area increase. Also, it is found that the flapping mechanism was not normally operated when the main wing has an aspect ratio or area more than each certain value. Finally, the wing shape is determined by comparing thrust-to-power ratio of all wings satisfying the required minimum thrust. However, the stability is not secured due to moment generated by disaccord between thrust line and center of gravity. To cope with this, aerodynamic dampers are used at the top and bottom of the fuselage; then, indoor flight test was attempted for indirect performance verification of the parametric study of the main wing.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.4 s.77
• /
• pp.499-509
• /
• 2005

The excessive wind-induced motion of tall buildings most frequently result from vortex-shedding-induced across-wind oscillations. This form of excitation is most pronounced for relatively flexible, lightweight, and lightly damped high-rise buildings with constant cross-sections. This paper discusses the aerodynamic means ofmitigating the across-wind vortex shedding induced in such situations. Openings are added in both the drag and lift directions in the buildings to provide pressure equalization. Theytend to reduce the effectiveness of across-wind forces by reducing their magnitudes and disrupting their spatial correlation. The effects of buildings with several geometries of openings on aerodynamic excitations and displacement responses have been studied for high-rise buildings with square cross-sections and an aspect ratio of 8:1 in a wind tunnel. High-frequency force balance testshave been carried out at the Kumoh National University of Technology using rigid models with 24 kinds of opening shapes. The measured model's aerodynamic excitations and displacement were compared withthose of a square cylinder with no openings to estimate the effectiveness of openings for wind-induced oscillations. From these results, theopening shape, size, and location of buildings to reduce wind-induced vortex shedding and responses were pointed out.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.140-147
• /
• 2019

The purpose of this study is to find biomechanical parameters for optimal shoes production through an ergonomic usability assessment of five existing types of shoes preferred by B-BOY. Ten experts and ten non-experts participated in the experiment, and 12 infrared cameras (Qualis, Oqus), force plate (Kistler, 9286AA) and foot pressure plate (Zebris Gmbh, Zebris PDM-System) were used to obtain the data. The results of the study are as follows. First, P shoes with a friction coefficient of 0.38 and a free moment of 0.32 N/m/kg are desirable in terms of traction capability and safety. Second, on the cushion, it was found that the N shoes 2.51 N, sec/kg and non-expert, and 2.86 N and sec/kg were suitable. Third, it is deemed appropriate for C shoes with a forefoot average pressure of 10.11 KPa (right), 10.05 KPa (left), and V shoes with a rearfoot average pressure of 8.4 KPa (right) and 8.36 KPa (left). In conclusion, the combination of the structure and material of V shoes should be developed for traction and stability, N shoes for cushion, and walking balance for C and V shoes.

• Women's Health Nursing
• /
• v.25 no.3
• /
• pp.329-344
• /
• 2019

Purpose: This study aimed to identify utilization of the work-family support policy (WFSP) and factors affecting retention intention among Korean female military officers. Methods: This cross-sectional survey recruited 103 married female officers from the Korean Army, Navy, and Air force with preschool-aged children through convenience and snowball sampling. Via online surveys from June to November, 2018, the participants self-reported retention intention, work-family conflict, job satisfaction, and utilization of the WFSP. The data were analyzed using descriptive statistics, independent t-tests, one-way analysis of variance, Pearson's correlation coefficient, and multiple linear regression. Results: Retention intention ($22.29{\pm}5.98$) was reported at the mid-level, lower than scores reported in the literature for female workers. Work-family conflict ($32.51{\pm}5.29$) and job satisfaction ($63.10{\pm}7.45$) were above the midpoint levels. Use of maternity leave (100.0%) and parental leave (92.2%) was high, especially compared to the rates of child-care day off (20.4%) and parenting time (20.4%). 'Noticeable increases in childcare services within the army' (22.8%) was reported as the supportive measure needed the most by female military officers. Job satisfaction (${\beta}=.43$, $p{\leq}.001$), the use of parenting time (${\beta}=-0.29$, p=.002), living type (${\beta}=-.18$, p=.043), and service type (${\beta}=-.16$, p=.035) significantly influenced retention intention. Conclusions: The findings highlight the priority areas of importance within the WFSP and suggest that a family-friendly culture can improve female officers' retention intention. Accordingly, policy changes at the Ministry of National Defense improving the system to enhance a family-friendly culture in the military is expected to strengthen the retention intention of female officers and contribute to excellence in the military workforce.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.123-128
• /
• 2018

Effect of activators in flux on the printability and wettability of a solder paste was evaluated in this study. The activators in this study were dicarboxylic acids, which were oxalic acid (n = 0), malonic acid (n = 1), succinic acid (n = 2), glutaric acid (n = 3), adipic acid (n = 4), and pimelic acid (n = 5). When the solder pastes were observed with a SMT scope, solder with glutaric acid showed clean and shiny surface when it was melted. Slump ratio of the solder pastes was low when the carbon numbers of the dicarboxylic acid were 1-3. Spreadability was high when the carbon number was over 2. Zero cross time of wetting balance test was under 1 sec when the carbon number was over 3. When activator was oxalic acid or malonic acid, zero cross time was over 1 sec and maximum wetting force was low. Fluxes with the oxalic acid and malonic acid showed decomposition at the temperature close to melting point. Among the dicarboxylic acids, glutaric acid provided excellent slump, spreadability, and wettability.

• Ecology and Resilient Infrastructure
• /
• v.10 no.3
• /
• pp.51-63
• /
• 2023

Riverine tree management is crucial in realizing a balance between flood control and ecological preservation, which requires an accurate assessment of the impact of trees on river water elevations. In this study, eight different formulas for evaluating vegetation roughness considering the drag force acting on trees, were reviewed, and the characteristics and applicability of these methods were evaluated from a practical engineering perspective. The study compared the characteristics of vegetation roughness measurement methods for calculated roughness coefficients at different water depths and analyzed factors such as effects of tree canopy width, tree density and diameter, and tree stiffness coefficient, and water level estimation results. A comparison of roughness coefficients at the same water depths revealed that the Kouwen and Fathi-Moghadam formulas and the Fischenich formula yield excessive drag coefficients compared to other formulas. Factors such as channel geometry, tree diameter, and tree density showed varying trends depending on the formula but did not exhibit excessive outliers. Formulas considering the tree stiffness coefficient, such as the Freeman et al.'s formula and the Whittaker et al.'s formula, showed significant variations in drag coefficients depending on the stiffness coefficient. When applied to small- and medium-sized virtual rivers in South Korea using the drag coefficient results from the eight formulas, the results indicated a maximum increase in water level of approximately 0.2 to 0.4 meters. Based on this review, it was concluded that the Baptist et al., Huthoff et al., Cheng, Luhar, and Nepf's formulas, which exhibit similar characteristics and low input data uncertainties, are suitable for practical engineering applications.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.679-688
• /
• 2003

The leptin receptor gene(LEPR) produces a high affinity receptor that mediates the regulation of the leptin gene. Leptin secreted from adipose tissue plays an important role in regulating feed intake and energy balance. In this study, a microsatellite marker within LEPR was selected and genotyped for the F2 population composed of 354 individuals from an intercross between Korean Native boars and Landrace sows. Totally, six alleles (255, 259, 261, 263, 265 and 267bp) and nineteen genotypes were detected in the population, of which the CE (261/265), CC (261/261) and EE (265/265) types were observed by 20.0%, 10.1% and 9.6%, respectively. Relationships between their genotypes and economic traits were analyzed. We found specific genotypes associated with economic traits such as body weight at 12 weeks of age/body fat including abdominal and trimmed fat/shear force (P〈0.001), body weight of 30 weeks of age (P〈0.01) and body weight of 3 weeks of age/back fat thickness (P〈0.05). The DD (263/263) and DF (263/267) types were associated with body weight at 3, 5, 12 and 30 weeks of age. The DF (263/267) type showed a highly significant effect on back fat thickness and body fat including abdominal and trimmed fat. The DF (263/267) type showed positive effect on shear force, whereas the BB (259/259) and DD (263/263) types negatively affected on tenderness.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.225-268
• /
• 2011

The general public are interested in the politics and form public opinion and keep in check the government for true democracy. The general public have the right to be furnished information from the government. And the government should enact the Freedom of Information Act to provide the public's right to know. At the same time, the government should enact the Data Protection Act to provide the public's right to privacy. There is a friction between the Freedom of Information Act and the Data Protection Act. It's hard to maintain the proper balance between the Freedom of information Act and the Data Protection Act, but many countries try to do so. The UK enacted the Data Protection Act 1998(DPA), which entered into force on 2000, to comply with EU Directive 1995. The Freedom of Information Act 2000(FOI), which came fully into force on 2005, was passed in 2000. The FOI imposes significant duties and responsibilities on public authorities to give access to the information they hold. The purpose of this study is to consider the provisions of the personal data in FOI and DPA. Besides this, it identifies the complaint cases on public authorities about the disclosure and exemption of the personal data in comparison with the acts. If information is the personal data of the person making the request, it will disclose under the DPA. If information is the personal data of a third party, it will disclose under the FOI. These acts interact each other to make up for the weak points in the other to make a proper application of the act on public authorities. This study may have any limitation in making a comparative study of the disclosure and exemption of the personal data in Korea. But it is expected to provide a basis for understanding the disclosure and exemption of the personal data in the UK.