• 제목/요약/키워드: Foot arch

검색결과 102건 처리시간 0.023초

정상인 대상으로 기능성 인솔과 결합한 보호형 양말이 발바닥 압력에 미치는 영향: 예비 실험 연구 (The Effect of Protective Socks Combined with Functional Insole on Plantar Foot Pressure in Healthy Adults: A Pilot Study)

  • 정도영
    • 대한물리의학회지
    • /
    • 제13권1호
    • /
    • pp.147-154
    • /
    • 2018
  • PURPOSE: This study examined the ability of experimental socks combined with a functional insole to reduce plantar foot pressure in healthy subjects. METHODS: The study enrolled 15 subjects. An in-shoe measurement device was used to measure the peak plantar pressure while walking. The peak forefoot, midfoot, and hindfoot plantar pressure data were collected under two conditions: the subjects were wearing their own socks and while they were wearing the experimental socks. The paired t-test was used to determine the differences in peak plantar pressure between the two conditions at all three positions. RESULTS: Wearing the experimental socks resulted in a significantly higher peak plantar pressure in the medial forefoot and midfoot areas than wearing one's own socks (p<.05), and also in significantly lower peak plantar pressure in the medial and lateral hindfoot (p<.05). However, there were no significant differences of peak plantar pressure between experimental and own socks in middle and lateral forefoot (p>.05). CONCLUSION: The experimental socks combined with a functional insole decreased plantar pressure in the hindfoot and supported the medial longitudinal arch. However, it is necessary to change the design and material of the forefoot area in the functional insole to prevent foot ulcer at that location in people with diabetes mellitus.

The Effect of Protective Socks with Functional Insoles on Plantar Foot Pressure in Diabetes Patients

  • Kim, Hyun Soo;Jung, Do Young
    • The Journal of Korean Physical Therapy
    • /
    • 제30권6호
    • /
    • pp.224-228
    • /
    • 2018
  • Purpose: The most common cause of plantar ulceration is an excessive plantar pressure in patients with peripheral neuropathy. Foot orthosis and therapeutic footwear have been used to decrease the plantar pressure and prevent the plantar ulceration in in diabetes patients. We investigated whether protective sock with functional insoles reduce plantar pressure while walking in 17 diabetes patients. Methods: An in-shoe measurement device was used to measure the peak plantar pressure while walking. Peak plantar pressure data were collected while walking under two conditions: 1) wearing diabetic sock and 2) wearing the protective sock with functional insoles. Each subject walked 3 times in 10-m corridor under three conditions, and data were collected in 3 steps in the middle of corridor with in right and left feet, respectively. Pared t-test was used to compare the peak plantar pressures in three plantar areas under these two conditions. Results: The protective sock with functional insoles significantly reduced the peak plantar pressure on the lateral rearfoot, but significantly increased the peak plantar pressure on the middle forefoot, and medial midfoot (p<0.05). However, there were not significant in medial and lateral forefoot, lateral midfoot, and medial rearfoot between diabetic sock and the protective sock conditions (p>0.05). Conclusion: The protective sock with functional insoles reduced plantar pressures in the rearfoot and supported the medial longitudinal arch. However, it is necessary to change the position of metatarsal pad in the insole design of forefoot area to prevent diabetic foot ulceration.

The Effect of Insole to Flexible Flat Foot on Dynamic Balance and Ankle Muscle Activity during the Y-Balance Test

  • Lee, Sue Min;Son, Sung Min;Hwang, Yoon Tae;Park, Seol
    • The Journal of Korean Physical Therapy
    • /
    • 제34권5호
    • /
    • pp.218-223
    • /
    • 2022
  • Purpose: This study sought to identify the effects of an insole applied for the flexible flat-foot condition on dynamic balance and ankle muscle activities during the Y-balance test (YBT). Methods: Thirteen flexible flat-footed adults and an equal number of normal-footed adults were enrolled. The dynamic balance of the subjects was measured using the YBT, which is a reach test. While they were reaching forward with their foot, the percentage maximum voluntary isometric contraction (MVIC) of the tibialis anterior, peroneus longus and medial and lateral gastrocnemius were measured and analyzed. The flat-footed group then applied the ready-made insoles and underwent the YBT again. A comparison of the distance and muscle activity was conducted using YBT, not only between the flat-footed and control group, but also between the flat-footed group before and after the application of the insole. Results: Between the groups, the anterior reach distance in the flat-footed group was significantly lower, but there were no significant differences observed in the posteromedial and posterolateral directions. With the insole, the reach distance of the flat-footed group was significantly increased in the anterior and posterolateral direction compared to the control group. With the insole, the lateral gastrocnemius activity significantly decreased compared to trials without the insole in the flat-footed group, but there were no significant differences in the other muscles. Conclusion: The insole for flat-footed subjects can maintain the medial arch of the foot, and it may help enhance functional and mechanical dynamic balance in people with flat feet.

청년층의 편평족 실태조사 (Research of Flatfoot on a adolescence)

  • 서태수
    • The Journal of Korean Physical Therapy
    • /
    • 제9권1호
    • /
    • pp.97-101
    • /
    • 1997
  • 1997년 5월 1일부터 1997년 5월 8일까지 대구보건전문대학 남녀 재학생 512명을 대상으로 편평족에 대한 조사결과에서 12명$(2.34\%)$의 강도의 편평족을 발견하였다. 성별에 따른 분포는 정도 이상의 편평족에 속하는 남자가 159명중 62명$(38.99\%)$이고 여자는 353명중 178명$(50.42\%)$으로 여자가 더 많은 비율로 나타났고, 강도에 속하는 심한 편평족은 모두 여자로 나타났다. 임상적으로 전예에서 족내면의 팽만을 나타내었고 심란 운동 후 피로 및 가벼운 통증을 호소하는 경우가 많았으나 종족궁의 침강의 정도와 임상중세와는 일정한 비례관계를 정할 수 없었다. 편평족 중세가 있는 학생 중에서 본인이 편평족인지 아닌지를 알지 못하는 경우가 대부분이었으며, 가장 심한 강도 중에서는 12명 중 6명$(50\%)$정도 인지하고 있었다.

  • PDF

50~60대 평발 여성의 컴프레션 팬츠 개발을 위한 착용자 필요 조사 (User Needs of Women with Pes Planus in Their 50s and 60s for Compression Pants Development)

  • 이소정;김동은
    • 한국의류학회지
    • /
    • 제41권3호
    • /
    • pp.420-432
    • /
    • 2017
  • This study examined user needs for compression pant development for women with pes planus in their 50s and 60s. A total of 355 women aged 50 to 69 participated in the survey and interview. Questions were asked if they had pes planus, the using condition of foot orthotic, inconveniences during gait, and wearing condition of compression pants. The results showed that 42 (11.8%) women had pes planus. Orthotic insole and arch support were used most frequently. The most uncomfortable aspect of foot orthotic (n=146) was that it was difficult to use unless they were going outside. Participants with pes planus responded that they felt discomfort on the inner area of propodium, metatarsus, ankle, and knee during gait. The purchase and wearing rate of compression pants were not high; however, compression pants were purchased with specific needs and purposes. Respondents mainly wore the compression pants for sports activities. M size was the most frequently worn size. They preferred high waist type leggings and there was a need to increase the compression strength of the waist, thigh, knee and ankle. Additionally, the ease of donning and doffing were discussed.

윈들라스 메커니즘을 적용한 트레일 워킹화 개발을 위한 생체역학적 분석 (Biomechanical Analysis for the Development of Windlass Mechanism for Trail-walking Shoe)

  • 박종진;박승범
    • 한국운동역학회지
    • /
    • 제25권4호
    • /
    • pp.489-498
    • /
    • 2015
  • Objective : The purpose of this study was to analyze the effects of the windlass mechanism in trail-walking shoe prototypes that can effectively support arches. A study of these effects should help with the development of a first-rate trail-walking shoe development guide for the distribution of quality information to consumers. Methods : The subjects were ten adult males who volunteered to participate in the study. Shoes from three companies, which will be referred to as Company S (Type A), Company M (Type B), and Company P (Type C), were selected for the experiment. The subjects wore these shoes and walked at a speed of 4.2 km/h, and as they tested each shoe, the contact area, maximum pressure average, and surface force were all measured. Results : Shoe Type A showed a contact area of $148.78{\pm}4.31cm^2$, Type B showed an area of $145.74{\pm}4.1cm^2$, and Type C showed an area of $143.37{\pm}4.57cm^2$ (p<.01). Shoe Type A demonstrated a maximum average pressure of $80.80{\pm}9.92kPa$, Type B an average of $85.72{\pm}11.01kPa$, and Type C an average of $89.12{\pm}10.88bkPa$ (p<.05). Shoe Type A showed a ground reaction force of $1.13{\pm}0.06%BW$, Type B a force of $1.16{\pm}0.04%BW$, and Type C a force of $1.16{\pm}0.03%BW$ (p<.05). Conclusion : The Type A trail-walking shoe, which was designed with a wide arch from the center of the forefoot to the front of the rearfoot showed excellent performance, however, more development and analysis of the windlass mechanism for a variety of arch structures is still necessary.

3D 스캐닝, 3D 모델링, 3D 프린팅 기반의 3D 시스템에 의한 시니어 평발용 인솔 제작 (Producing the insoles for flat feet of senior men using 3D systems based on 3D scanning, 3D modeling, and 3D printing)

  • 오설영;서동애
    • 복식문화연구
    • /
    • 제25권3호
    • /
    • pp.270-284
    • /
    • 2017
  • This study aimed to create 3D-printed insoles for flat-footed senior men using 3D systems. 3D systems are product-manufacturing systems that use 3-dimensional technologies like 3D scanning, 3D modeling, and 3D printing. This study used a 3D scanner (NexScan2), 3D CAD programs including Rapidform, AutoCAD, SolidWorks, Nauta+ compiling program, and a 3D printer. In order to create insoles for flat-footed senior men, we analyzed horizontal sections of 3D foot scans We selected 20 flat-footed and 20 normal-footed subjects. To make the 3D insole models, we sliced nine lines on the surface of the subjects' 3D foot scans, and plotted 144 points on the lines. We calculated the average of these 3D coordinates, then located this average within the 3D space of the AutoCAD program and created 3D sole models using the loft surface tools of the SolidWorks program. The sole models for flat feet differed from those of normal feet in the depth of the arch at the inner sideline and the big toe line. We placed the normal-footed sole model on a flat-footed sole model, and the combination of the two models resulted in the 3D insole for flat feet. We printed the 3D modeled insole using a 3D printer. The 3D printing material was an acrylic resin similar to rubber. This made the insole model flexible and wearable. This study utilized 3D systems to create 3D insoles for flat-footed seniors and this process can be applied to manufacture other items in the fashion industry as well.

Validity and Reliability of New Digital Navicular Drop Test Equipment in Young People

  • Park, Jin-Seong;Park, Du-Jin
    • PNF and Movement
    • /
    • 제19권2호
    • /
    • pp.279-285
    • /
    • 2021
  • Purpose: This study aimed to develop new digital navicular drop test (ND-NDT) equipment and to determine its validity and reliability. Methods: A total of 24 healthy male and female adults, who fully understood the purpose of the study and gave consent to participate in the study, were selected as participants. The NDT and ND-NDT were conducted in the dominant foot of the participants in a random order. For the NDT, the position of the navicular bone was marked with a pen first; then, the height of the navicular bone from the ground was measured in both sitting and standing positions. For the ND-NDT, after the sticker-type reflection markers were attached to the position of the navicular bone, the height of the navicular bone from the ground was measured in both sitting and standing positions. To assess the validity of the diagnostic tests, the same examiner measured the height of the medial longitudinal arch (MLA) three times in both the sitting and standing positions. To assess the inter-rater reliability of the ND-NDT, three examiners, in a random order, attached the sticker-type reflection markers to the position of the navicular bone and then measured the height of the MLA in both positions. Results: In the sitting position, the Pearson correlation coefficient (r) between the two diagnostic tests was very high (r = 0.97) and statistically significant. In the standing position, the Pearson correlation coefficient (r) between the two tests was 0.95, which was also statistically significant. The ICC2,1 values in the sitting and standing positions were 0.93 and 0.95, respectively, indicating significantly high inter-rater reliability. Conclusion: The ND-NDT equipment showed very high diagnostic validity, as well as excellent inter-rater reliability, indicating the clinical usefulness of the equipment as a diagnostic system for confirming pes planus.

3차원 스캔 데이터에 의한 초등학생의 발 성장에 관한 연구 (A Study of Elementary School Students' Feet Growth by 3D Scan Data)

  • 이정은;도월희
    • 한국의류산업학회지
    • /
    • 제16권6호
    • /
    • pp.935-944
    • /
    • 2014
  • This study was about to investigate the characteristics of elementary school students' feet growth, comparing and analyzed the measured values and the index values of 3D scan data. As the results from analyzing the measured values, the all measurement items excluding 'Toe 5 angle' showed some significant differences among the age classes, knowing that the elementary school students' feet were continually grown. Although, the items of length, thickness, width, height and circumference indicate some rapid growth of feet at 11 years old, but it appears slowing growth of 'Foot width' after the age of 11 years old. The angle item didn't show any sequential differences according to ages. As the results from analyzing the index values, the children in higher grades have longer 'Toe 5', thicker ankles, wider and thicker the superior part of feet than the children in lower grades. For the superior and the middle part of feet were lowly raised, their Arch height was low and thick. The inferior part of feet showed narrow width and higher height. Giving that the Medial ball width was wide and the Toe 1 angle is high for the children in higher grades, it is expected that the Metatarsophalangeal I might be more projected than that of children in lower grades. Likewise, knowing that the male students' feet shape was bigger than female students' feet from the result that the male students' index values were higher.