• Journal of Oral Medicine and Pain
• /
• v.19 no.1
• /
• pp.93-103
• /
• 1994

In order to evaluate thelong-term results of conservative treatment on TMJ closed lock, a follow-up study of thirst-two patients was performed 2 to 7 year after treatment. Evaluating method included the questionnaire, clinical examination, transcranial radiograph and mandibular kinesiography. The results were as follows : Seventy-eight percents of patients reported that symptoms were reduced completely or considerably. Recurrent headache was improved after treatment (72 percents of success rate). There was a significant decrease in VAS after treatment and at follow-up comparing with that of before treatment(p<0.01). Most common variable of Helkimo's clinical dysfunction index at follow-up was impared TMJ function. There was a significant decrease in Fricton's craniomandibular index and dysfunction index(p<0.01) Mean interincisal distance was increased by 14.07mm after treatment and was also increased at follow-up by 2.80mm comparing with that of after treatment(p<0.01). Before treatment, condylar translation measurements of affected and non-affected sides on the transcranial radiograph were 4.89±3.20mm and 9.09±3.73mm respectively and at follow- up examination, those were 14.98±4.77 and 17.05±4.35mm respectively. At follow-up, condylar translation were increased significantly comparing with those of before treatment(p<0.01). In 93.1% of patients, the condylar position of affected side at maximum mouth opening was behind the articular eminence before treatment but the percentage was decreased to 13.8% at follow-up(p<0.01). The pattern and range of mandibular movements at follow-up examination were similar to the typical normal movements. And in 16 cases showing lateral deviation of opening path, the deviation was directed to the affected and non-affected sides with the same frequency.

• Korean Institute of Interior Design Journal
• /
• v.15 no.3 s.56
• /
• pp.155-162
• /
• 2006

Space is integrated or segment with organic formation by circulation path. It estimates important problem to grasp as factor that promote movement of visitor and space organization without grasping circulation as connection relation about simple space function from these viewpoint, is a thing which this study does not cause confusion to visitor's circulation path through data that analyze form of space connection and visitor's circulation path as quantitative in museum space and layout form that access by easy each unit exhibition grasps what it is. This study does factor grasping for guideline and inspection circulation path of layout by purpose in exhibition space on the basis of analytical result that grasps connection form between exhibition area that grasp laying stress on visitor's movement and appears in space through follow-up survey for circulation path of museum exhibition area. Space connection form that is expose by sequence of investigation and analysis(II) estimates on constituent affecting to visitor's circulation, and these do not speak for all space connection forms at the museum, but may systematize typology about connection form of unit spaces to utilize by indicator pointer of space planning if continue study to various spatial sphere more than hereafter. Unit exhibition area, divide connection form of space by grid and tree and laying stress on this quantitative data by spectator follow-up survey comparison and Estimate that space connection form provides partial basis of judgement for supposition that can promote direction and circulation path about visitor's movement if summarize result of investigation and analysis (III).

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.181-191
• /
• 2021

The aim of the study is to empirically investigate and analyze the influence of public welfare, audit findings, and follow-up of audit recommendations on audit opinion with the disclosure level of financial reports as an intervening variable using agency theory and signaling theory. To achieve this purpose, a quantitative research method was employed. Population of this study is Provincial Government Financial Reports in Indonesia for fiscal years 2016 to 2018. There were 84 financial reports that met the criteria of purposive sampling. The data were gathered from the websites of the Audit Board of the Republic of Indonesia and the Indonesian Central Bureau of Statistics. In this study, the hypothesis-testing tool is path analysis using the Statistical Package for Social Sciences version 15. Based on the multiple regression analysis, the results show that audit findings, public income, and the disclosure level of financial reports significantly influenced audit opinion. Besides, the follow-up of audit recommendations and public health significantly influenced audit opinion through the disclosure level of financial reports. This study suggests that, in order to have better audit opinion, local governments need to improve public welfare, follow-up audit finding, and disclose more details in financial report.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1939-1944
• /
• 2003

This paper presents a global path planning algorithm based on a visibility graph method, and applies additionally various constraints for constructing the reduced visibility graph. The modification algorithm for generating the rounded path is applied to the globally shortest path of the visibility graph using the robot size constraint in order to avoid the obstacle. In order to check the visibility in given 3D map data, 3D CAD data with VRML format is projected to the 2D plane of the mobile robot, and the projected map is converted into an image for easy map analysis. The image processing are applied to this grid map for extracting the obstacles and the free space. Generally, the tree size of visibility graph is proportional to the factorial of the number of the corner points. In order to reduce the tree size and search the shortest path efficiently, the various constraints are proposed. After short paths that crosses the corner points of obstacles lists up, the shortest path among these paths is selected and it is modified to the combination of the line path and the arc path for the mobile robot to avoid the obstacles and follow the rounded path in the environment. The proposed path planning algorithm is applied to the mobile robot LCAR-III.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.3
• /
• pp.527-539
• /
• 2009

The purpose of this study was to evaluate the influence of ankle joint mobilization on equilibrium ability of supinated foot. Both Joint mobilization group(n=20) and control group(n=20) were measured an equilibrium ability by Balance performance monitor at pre-test, post-test in 2 weeks, post-test in 4 weeks and follow-up test in 2 weeks. The sway area, sway path length and sway maximum velocity of the joint mobilization group were significantly reduced among the experimental period (p<.05). The reduction of sway area, sway path length and sway maximum velocity were significantly different between the joint mobilization group and the control group at in 2 weeks, 4 weeks and follow-up test(p<.05). In conclusion, we were found that ankle joint mobilization could reduce sway area, sway path length and sway max velocity and improve a balance for the individuals with supinated foot.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.106-113
• /
• 2011

The object of this clinical study was to evaluate the short-term outcome of modified resin-bonded fixed partial dentures which utilizes the original tooth undercuts and different path of insertion of components. Materials and methods: 71 units of modified RBFPDs that were used in 21 patients at the Department of Prosthodontics, College of Dentistry, Yonsei University were evaluated. The follow-up period was up to 25 months, the mean being 7 months. Survival rate, mobility, percussion, probing depth, bleeding on probing, plaque index was recorded and radiographs were taken to monitor alveolar bone loss. Results & Conclusion: Within the limits of this short term retrospective study, it was concluded that: 1. No mechanical failure such as debonding or fracture of the framework was found during the follow-up period. 2. The periodontal apparatus was stable and no clinical change was observed after prosthetic treatment. 3. No significant marginal bone loss was found in the radiographic evaluation.

• Journal of Forest and Environmental Science
• /
• v.38 no.4
• /
• pp.239-248
• /
• 2022

Forestry crane work in a forest harvester or forwarder is regarded as one of most hard work requiring a very high level of operation skill. The operator must handle two or more multi-axes joysticks simultaneously to control the multiple manipulators for maneuvering the crane-tip to its intended location. This study has been carried out to develop a crane-tip controller which can intuitively maneuver the crane-tip, resulting in improving the productivity by decreasing the technical difficulty of control as well as reducing the workload. The crane-tip controller consists of a single 2-axis joystick and a control algorithm run on microcontroller. Lab-scale forestry crane was constructed using electric cylinders. The crane-tip control algorithm has the crane-tip follow the waypoints generated on the given path considering the dead band region using LBO (Lateral Boundary Offset). A speed control gain to change the speed of relevant cylinders relatively is applied as well. By the P (Proportional) control within the control interval of 20 msec, the average error of crane-tip control on the predefined straight path turned out to be 14.5 mm in all directions. When the joystick is used the waypoints are generated in real time by the direction signal from the joystick. In this case, the average error of path control was 12.4 mm for straight up, straight forward and straight down movements successively at a certain constant speed setting. In the slant movement of crane-tip by controlling two axes of joystick simultaneously, the movement of crane-tip was controlled in the average error of 15.9 mm when the crane-tip is moved up and down while moving toward forward direction. It concluded that the crane-tip control was possible using the control algorithm developed in this study.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.591-597
• /
• 1996

To straighten the path that farm machinery follows in paddy fields, it is necessary to measure and evaluate the tracks that these machines leave behind. However, there are no known methods for making such measurements and evaluations since it is difficult to accurately trace the paths that the machine make in paddy fields. Therefore, a measuring system has been developed which can accurately recored the path of a farm machinery in a field by measuring the horizontal straight-line distance from the side of the field to the machine. This system consists of a track subsystem on the machine and a range finder system. A measuring appraratus is installed on a flatcar which runs on rails over 50 m long at the side of the filed. The track subsystem uses a CCD camera to track the movement of the machine in the field which is following a lengthwise path. The range finder subsystem measures the distance that the measuring apparatus has traveled on the rails and the distance from the app ratus to the machine in the field. This system makes it possible to record the path that the machine travels. Even though differences in traveling distance arise between the measuring apparatus and the farm machine, these differences are detected by image processing , which allows the machine in the field to be located accurately. The short(0.05 second) time required for image processing is enough to follow an object . In the present study, this system was able to measure the path that a moving tractor makes. Even though a lag of up to 0.4 meters occurred, this system did not miss its target during operation of the track subsystem. Thus the path measuring system developed here is able to record vehicle paths automatically by following the movement of vehicles in the field and measuring the distance to them. It is expected to come into use in such applications as unmanned moving vehicle tests.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.72-80
• /
• 2021

Albatross uses dynamic soaring technique to obtain energy from horizontal winds and fly long distances without flapping. These dynamic soaring technique can be applied to manned/unmanned aircraft to reduce the components required for the aircraft and achieve light weight and small volume to effectively perform a given task. In this paper, to simulate the dynamic soaring technique of Albatross, we defined the optimization problem and set each boundary condition to derive the optimal flight trajectory and carry out simulations to follow it. In particular, to model dynamic soaring simulations more closely with reality, we proposed a horizontal wind model that changes every moment. This identifies and analyzes the effect of the time-variable horizontal wind model on the dynamic soaring mission of unmanned aircraft.

• Publications of The Korean Astronomical Society
• /
• v.26 no.3
• /
• pp.103-114
• /
• 2011

We have carried out a follow-up study on the students who have participated or are going to participate in either the International Astronomy Olympiad (IAO), the Asia Pacific Astronomy Olympiad (APAO) or the International Olympiad on Astronomy and Astrophysics (IOAA) from 2002 to 2011. The survey questionnaires returned from ten high school students including five who are to participate in 2011 as well as fourteen college students have been analyzed in various aspects of their backgrounds and personal characteristics. In family life, their parents tend to have high educational background along with high expectations for their children. In regard to the academic environment, most students express a general satisfaction in school life, including their relationship with teachers and classmates. In personal characteristics, they describe themselves as inquisitive, perseverant, competitive, creative, self-motivated and goal-oriented, in addition to many other traits. Most students have a strong interest in astronomy which usually begins in middle schools through exposure to astronomy books. On top of it, the astronomy olympiad has provided them with an opportunity to strengthen their self-esteem, problem-solving ability and conviction about scientific careers. Accordingly, the experience in astronomy olympiad has led a considerable number of students to continuously studying in astronomy related fields or otherwise in other science and engineering areas. In conclusion, the astronomy olympiad plays such an important role that it can make a significant contribution to astronomy as well as science in general by having positive impact on the potential career path of its participants.