• Journal of IKEEE
• /
• v.1 no.1 s.1
• /
• pp.120-137
• /
• 1997

Han's model, which is able to analyze optical communication between earth station and geo-satellite as a function of atmospheric conditions and elevation angles. is presented. In Han's model, atmospheric conditions are roughly classified into six basic types; clear sky, cloud, haze, fog, rain and snow. Data rate satisfying for the BER below $10^{-7}$ is analyzed by Han's model in case of up-link and down-link, respectively. Data rate is more limited by up-link than by down-link because the pointing loss caused by atmosphere on the up-link is greater than the spatial coherence degradation caused by atmosphere on the down-link.

• Journal of Environmental Science International
• /
• v.21 no.9
• /
• pp.1087-1095
• /
• 2012

The investigation was made about distribution and ecological characteristics of host plant for Phellinus linteus at habitats in Gangwon-Do. The habitats of P. linteus are the place where the fog is much generated and there is lots of the moisture. The flora of the vascular plants in P. linteus habitats were consisted of 76 taxa; 62 species, 10 varieties and 4 formas of 62 genera of 40 families. The plants of infiltration type were found 70% around P. linteus habitats. This results shows that the natural environments of P. linteus habitat is very stable condition. The categories of vegetation were classified into two types. The host plant for P. linteus appeared 61.6% from Populus tomentiglandulosa. The first type showed up above the sea about 600m and west exposure region. The second type was investigated around the facing north region of the steep slope-land.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.6
• /
• pp.819-828
• /
• 2001

The operating point of a small-sized axial fan is strongly dependent upon the system resistance. Therefore, the turbulent flow characteristics around a small-sized axial fan may change significantly according to the operating point. This study represents three-dimensional turbulent flow characteristics around a small-sized axial fan measured at the ideal design point $\phi$=0.25, which is equivalent to the maximum total efficiency point, by using three dimensional fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSAs, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fluid is used to supply particles by means of fog generator. Mean velocity profiles downstream of a small-sized axial fan along the radial distance show that the streamwise and the tangential components exist in a predominant manner, while the radial component has a small scale distribution and shows the inflection which its flow direction is inward or outward. Moreover, the turbulent intensity profiles show that the radial component exists the most greatly among turbulent energies.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.371-376
• /
• 2001

The operating point of a small-sized axial fan for refrigerator is strongly dependent upon the system resistance. Therefore, the turbulent flow characteristics around a small-sized axial fan may change significantly according to the operating point. This study represents three-dimensional turbulent flow characteristics around a small-sized axial fan measured at the four operating points such as $\varphi=0.1$, 0.18, 0.25 and 0.32 by using fiber-optic type LDA system. This LDA system is composed of a 5 W Argon-ion laser, two optics in back-scatter mode, three BSA's, a PC, and a three-dimensional automatic traversing system. A kind of paraffin fluid is utilized for supplying particles by means of fog generator. Mean velocity profiles downstream of a small-sized axial fan along the radial distance show that both the streamwise and the tangential components exist predominantly in downstream except $\varphi=0.1$ and have a maximum value at the radial distance ratio of about 0.8, but the radial component, which its velocity is relatively small, is acting role that only turns flow direction to the outside or the central part of axial fan. Moreover, all of the velocity components downstream at $\varphi=0.1$ show much smaller than those upstream due to the static pressure rise at the low-flowrate region.

• Journal of radiological science and technology
• /
• v.8 no.2
• /
• pp.11-14
• /
• 1985

The author came to analize and get the following problems after researched radiographic quality in order to find out the necessary factors to improve in radiographs of frontal projection of the chest selected at random of the adult patients (1545 male, 1520 female) who had been examined in 4 departments of radiology of the general hospitals in Seoul and Kyungki area. 1. Problems of x-ray film or of radiographic cassette appeared in 2.97% radiographs on account of selection of the film size (except costophrenic sinus) (1.79%), poor screen-film contact (0.85%), light leakage of cassette (0,33%). 2. Problems of patients' positioning or breathing appeared in 16.57% radiographs of all because of overlapping of lung apex and clavicle (6.98%), overlapping of scapula and lung field (5.87%), asymmetrical projection of clavicles (1.76%), errors in positioning and breathing of the patient (1.96%). 3. Problems of x-ray exposure factors or film processing appeared in 22.25% radiographs because of over-density (2.64%), under-density (3.95%), fog (0.59%), demonstration density under clavicles or lung marking unsharply (3.82%), not clear of lung marking from breast region (0.94%), not clear the lung marking from the part overlapped of heart and lungs (3.92%), not clear the lung marking from the part overlapped of liver and lung (6.49%).

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.1
• /
• pp.39-45
• /
• 2007

This paper proposes a method of container position measurement using automatic landing system that is estimated by a laser range finder. In the most of container position measurement methods, CCD cameras or laser scanners have been used to get the source data. However those sensors are not only weak for disturbances, for examples, the light, fog, and rain, but also the system cost is high. When the spreader arrives at the goal position, it is still swung by inertia or by wind effect. In this paper, the spreader swung data have been used to find the container position. The laser range finder is equipped in the front side of spreader. It can measure distance and relative position between spreader and container. This laser range finder can be rotated as desired by a motor. And a tilt sensor is equipped on the spreader to measure spreader sway. The relative position information between the spreader and a container using the laser range finder and tilt sensor is estimated through the geometrical analysis.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1488-1490
• /
• 2008

The gyroscope is the sensor for detecting the rotation in inertial reference frame and constitute the navigation system together an accelerometer. As the inertial reference equipment for attitude determination and control in the satellite, the mechanical gyroscope has been used but it bring the disturbance for mass unbalance so the disturbance give a bad influence to the observation satellite mission because the mechanical gyroscope has the rotation parts. During the launch, The mechanical gyroscope is weak in vibration, shock and has the defect of narrow operating temperature range so it need the special design in integration. Recently the low orbit observation satellite for seeking the high pointing accuracy of image camera payload accept the FOG(Fiber Optic Gyro) or RLG(Ring Laser Gyro) for the attitude determination and control. The Ring Laser Gyro makes use of the Sanac effect within a resonant ring cavity of a He-Ne laser and has more accuracy than the other gyros. It need the 1000V DC to create the He-Ne plasma in discharge tube. In this paper, the design process of the High Voltage Power Supply for RLG(Ring Laser Gyroscope) is described. The specification for High Voltage Power Supply(HVPS) is proposed. Also, The analysis of flyback converter topology is explained. The Design for the HVPS is composed of the inverter circuit, feedback control circuit, high frequency switching transformer design and voltage doubler circuit.

• Current Industrial and Technological Trends in Aerospace
• /
• v.5 no.2
• /
• pp.58-66
• /
• 2007

지상, 항공 및 우주를 이동하는 모든 물체는 반드시 자신의 자세를 결정하기 위해서 여러 가지 센서들을 장착하여 그 신호를 이용해서 자동 항법, 유도 및 제어를 수행한다. 이때, 동역학 특성이 빠른 시스템들은 반드시 각속도를 측정할 수 있어야 하는데 이를 해결하는 장비가 자이로인 것이다. 본 논문에서는 다양한 자이로를 소개하며 그 원리와 성능 그리고 적용 분야에 이르기까지 현황을 집중 분석하고 특히 세계적인 자이로 개발업체를 소개하면서 그 업체가 보유하고 있는 제품들을 일부 소개한다. 자이로는 초창기 김벌 시스템을 이용한 관성원리를 적용한 것부터 시작하여 현재는 광학 시스템을 적용한 RLG 및 FOG 자이로가 많은 분야에서 사용되고 있고, 최근 새롭게 부각되어 개발을 시작하고 있는 MEMS 자이로가 있는데 아직 우주 비행체 분야에서는 적용되지 못하고 있다. 그리고, 자이로의 큰 범주로 다루어지지는 않지만 자기력을 이용해서 회전체인 로터와 고정체인 플랫폼 사이에 기계식 접촉이 전혀 없는 새로운 시스템인 ESG 자이로도 일부 상용으로 생산되고 있다. 현재까지는 기계식 자이로의 정밀도 및 안정성이 광학식 자이로보다 우수하여 많이 사용되고 있지만 최근의 개발 추세로 보면 곧 광학식 자이로의 강세가 두드러질 것으로 보인다.

• Computers and Concrete
• /
• v.20 no.1
• /
• pp.99-110
• /
• 2017

Service life assessments which do not include the synergy between mechanical and environmental loading are neglecting a factor that can have a significant impact on structural safety and durability assessment. The degradation of concrete structure is a result of the combined effect of environmental and mechanical factors. In order to make service life design realistic it is necessary to consider both of these factors acting simultaneously. This paper deals with the advanced modelling of concrete carbonation and chloride ingress into concrete using stochastic 1D and 2D models. Widely accepted models incorporated into the new fib Model Code 2010 are extended to include factors that reflect the coupled effects of mechanical and environmental loads on the durability and reliability of reinforced concrete structures. An example of cooling tower degradation by carbonation and an example of a bended reinforced concrete beam kept for several years in salt fog are numerically studied to show the capability of the stochastic approach. The modelled degradation measures are compared with experimental results, leading to good agreement.

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.721-728
• /
• 2012

Marine traffic safety of the Vung Tau Waterway, from port limit to Ganh Rai Gulf, plays a crucial role in the economic development of the important triangular economic zone in the south of Vietnam: Ho Chi Minh City, Dong Nai Province, Ba Ria-Vung Tau Province. This paper uses the IWRAP Mk2 program to assess marine traffic safety and shows that in the area there are three parts of fairway have highest risk of collision (from buoys No. 8-9 to buoys No. 1-2 of the Song Dinh fairway; from buoy No. 0 to buoys No. 8-9 and from buoys No. 6-9 to buoys No. 8-9A of the Sai Gon-Vung Tau fairway) and the two areas have highest risk of grounding (the Vung Tau coastline from Ganh Hao to Sao Mai and an area in the Ganh Rai Gulf). In addition, the result of a questionnaire survey on a group of Pilots shows that wind, current and rain/fog have considerable negative effect to ship handling of large vessels in this area. This paper's results will be used in the further research to discover solutions for improving marine traffic safety in the Vung Tau Waterway.