• Structural Engineering and Mechanics
• /
• 제88권6호
• /
• pp.599-608
• /
• 2023

The present study is focused on instigation of the nonlinear mechanical behavior of reinforced concrete beams considering different types of FRP bars through nonlinear finite element simulations. To explore the impact of the FRP reinforcement type and geometry on the nonlinear mechanical behavior of reinforced beam, intensive parametric studies are carried out and discussed. Twenty models were carried out based on the finite element software (ABAQUS). The concrete damage plasticity model was considered. Four types of fiber polymer bars, CFRP, GFRP, AFRP and BFRP as longitudinal reinforcement for concrete beam were used. The validation of numerical results was confirmed by experimental as well as numerical results, then the parametric study was conducted to evaluate the effect of change in different parameters, such as bar diameter size, type of FRP bars and shear span length. All results were analyzed and discussed through, load-deflection diagram. The results showed that the use of FRP bars in rebar concrete beam improves the beam stiffness and enhance the ultimate load capacity. The load capacity enhanced in the range of (20.44-244.47%) when using different types of FRP bars. The load-carrying capacity of beams reinforced with CFRP is the highest one, beams reinforced with AFRP is higher than that reinforced with BFRP but beams reinforced with GFRP recorded the lowest load of capacity compered with other beams reinforced with FRP Bars.

• 마이크로전자및패키징학회지
• /
• 제16권4호
• /
• pp.33-39
• /
• 2009

마스크리스 리소그래피(maskless lithography)에 응용하기 위한 마이크로렌즈 어레이(microlens array, MLA)가 석영의 습식 식각과 UV 접착제(UV adhesive)의 코팅을 바탕으로 개발되었다. 제작된 MLA의 초점거리는 ${\sim}45\;{\mu}m$ 정도였으며, 집광되는 광선의 초점은 ${\sim}1\;{\mu}m$로 측정되었다. MLA를 통과하며 초점을 맺은 빔(beam)의 크기 및 세기가 charge coupled device (CCD) 카메라와 빔 프로파일러(beam profiler)를 이용하여 각각 측정되었으며, 일정한 세기의 점들이 초점면에서 고르게 관찰되었다. 초점거리는 코팅된 UV 접착제의 두께에 따라 변화하였으며, UV 접착제의 두께가 두꺼울수록 짧아지는 경향을 보였다. 일반적인 마스크 얼라이너(mask aligner)를 이용한 MLA의 UV 포커싱(UV focusing)이 감광막(photoresist, PR) 상에서 실시되었으며, MLA를 통과한 빛이 감광막 위에 일정하게 집광되었다. 마스크 얼라이너와 MLA 사이의 거리 변화에 따라 감광막에 구현된 패턴 사이즈가 조절 되었다. 고온에서 오랜 시간이 지난 후에도 소자의 특성은 전혀 변함이 없었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.172-172
• /
• 2016

Dual-beam experiments (Focused ion beam - Orientation mapping microstructure, FIB-OIM) is a widely used experimental tool because this experiments tool available alternates between automated serial sectioning and EBSD with the help of dual beams. We investigated the reconstruction procedure for analysis tool which three-dimensional internal microstructure using Ni superalloy(IN100) and ZrO2. As a results, we observed annealing twin boundary each layer in Ni superalloy(IN100) and fairly isotropic internal microstructure in ZrO2 using marching cubes algorithm. According to these results, this procedure is reconstructed well and we gained ability to arrange the EBSD map and internal microstructure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회논문집(II)
• /
• pp.457-462
• /
• 1998

An experimental study was carried out for hybrid steel beams with reinforced concrete ends. The purpose is to examine the shear strength and to develop the design methodology of the RC-S connection region. Tested were four beams which included a reference beam and three beams with various parameters. The reference beam was used to make a comparison with remaining specimens. The test parameters were focused mostly on the concentrated shear reinforcements. The ratio of concentrated shear reinforcements and their types were investigated in this study.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.

• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.61-68
• /
• 2005

An analytical method for determining the thermal stress distributions in a 3-layered beam is developed, which is focused on the end effects. This method gives the stress distributions which satisfy the stress-free boundary condition at the end completely. For verification of the method, a numerical example which was introduced by other researchers is treated. The stress distributions agree with the results of other researchers. The results show that the show and peeling stresses at the interfaces are significant near the edge and become negligible in the interior region.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.306-309
• /
• 1999

Based on the principle of complementary energy, an analytical method is developed which focused on the end effects for determining thermal stress distributions in the claded beam. This method gives the stress distributions which completely satisfy the stress-free boundary condition at the edge. Numerical result shows that shear stress and peeling stress at the interface between the substrate and clad are significant near the edge and become negligible in the interior region. Even though the relative location where the maximum or minimum stresses take place moves to interior as the length of the beam become smaller, the absolute location from the free end and the value of these stresses are the same in spite of the variation of the length of beam.

• 한국진공학회지
• /
• 제1권2호
• /
• pp.269-276
• /
• 1992

경계 요소법을 이용하여 Finely-focused ion beam 시스템을 위한 전계형 시뮬레 이터를 개발하였다. 경계 요소법을 시뮬레이터에 적용함으로써 기존의 유한 요소법, 차분근 사법에서는 피할 수 없었던 내부격자망 구성이 불필요하게 됨에 따라 계산속도를 현저히 줄 일 뿐만 아니라 불규칙 경계에 대한 요소분할이 가능하게 되어 최적렌즈구조 설계의 새로운 요소인 전극구조의 모양을 자유롭게 시뮬레이션 할 수 있게 되었다. 또한 개발된 시뮬레이 터를 이용하여 최적조건을 만족하는 구조를 제안한다. 이때 렌즈설계조건은 beam half-angle 3.0 mrad, working distance 50mm, 빔에너지 퍼짐 (beam energy spread) 10eV, 가속에너지 35keV이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기설비전문위원
• /
• pp.235-236
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.115-121
• /
• 2007

The aeroelastic analysis of rotor blades with trailing edge flaps, focused on reducing vibration while minimizing control effort, are investigated using large deflection-type beam theory in forward flight. The rotor blade aerodynamic forces are calculated using two-dimensional quasi-steady strip theory. For the analysis of forward flight, the nonlinear periodic blade steady response is obtained by integrating the full finite element equation in time through a coupled trim procedure with a vehicle trim. The objective function, which includes vibratory hub loads and active flap control inputs, is minimized by an optimal control process. Numerical simulations are performed for the steady-state forward flight of various advance ratios. Also, numerical results of the steady blade and flap deflections, and the vibratory hub loads are presented for various advance ratios and are compared with the previously published analysis results obtained from modal analysis based on a moderate deflection-type beam theory.