• Elastomers and Composites
• /
• 제50권2호
• /
• pp.81-86
• /
• 2015

In this study, natural rubber latex foam was prepared in order to replace commercialized polyurethane foams as a car seat material. Physical properties of the latex foam were investigated and the light stability was improved. The latex foam was mixed in an aqueous solution state, and the degree of foaming and the accelerator ratios were appropriately controlled. Tensile properties, hysteresis and dynamic mechanical properties of the latex foam were measured to compare with those of polyurethane foams. UV light absorbers and radical scavengers were added for improving light stability of the latex foam. Xenon lamp test was conducted to investigate the effects of the reagents on light stability. Our results revealed that the prepared latex foam including a light absorber with an antioxidant showed excellent light stable performances.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2003년도 봄 학술발표대회논문집
• /
• pp.212-213
• /
• 2003

• 타이어
• /
• 통권21호
• /
• pp.26-29
• /
• 1969

• 한국의류학회지
• /
• 제47권1호
• /
• pp.110-122
• /
• 2023

The COVID-19 pandemic increased people's time at home and caused an 80% increase in noise disputes between floors. The purpose of this study is to propose suitable materials for making indoor shoes (insoles) to minimize noise between floors. Subjects without back pain and leg-related disease (e.g. arthritis, etc.) from three different age groups (childhood, adolescence, and adulthood) were recruited for the study. Five polymer insole materials were considered: Chloroprene Rubber (CR foam), Ethylene Propylene Diene Monomer (EPDM foam), Natural Latex foam, Ethylene Vinyl Acetate (EVA foam), and Polyurethane (PU foam). From these materials, 20 combinations were prepared and randomly tested for noise and vibration. The results revealed a significant difference in noise and vibration levels based on the type of material used and the age of the subject. Nevertheless, all materials under consideration successfully reduced noise and vibration; in particular, type A-C greatly decreased. The CR foam material was especially effective at noise and vibration reduction (p<.01). This study suggests that adding insoles into socks that children wear at home could reduce noise vibration and disputes between floors.

• 대한인간공학회지
• /
• 제6권1호
• /
• pp.41-44
• /
• 1987

Researches were made on foot-warming, anti-bacteria and deodorant treatment. Feet, the very important organ to human body, perspire much and their temperature is lower than those of other parts. Hence, keeping feet warm, sanitary and deodorant is the area of this study. Latex sponge of activated carbon, impregnated open cell foam, treated with Vikol DZ-anti-bacteria finishing agent, was developed and tested for warmth-keeping by KSK 0560 test method and for sanitization by AATCC 90 HALO test method and for deodorization by wearing tests. The results show that the new developed latex spongee has warmth-keeping ratio of 2.5 times higher than that of the conventional spong and it has an excellent anti-bacteria effect. Actual wearing function tests also show that it improves significantly the performance of deodorization, sanitization, warmth-keeping and bulkiness.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.91-96
• /
• 2019

The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).

• 콘크리트학회지
• /
• 제8권5호
• /
• pp.123-133
• /
• 1996

최근의 각종 사회시설의 확충에 따른 건설공사 및 교통시설 등은 많은 진동을 유발하여 사회적인 문제를 야기하고 있는 실정이다. 본 연구는 각종 제진재료를 이용하여 진동을 억제할 수 있는 콘크리트를 개발하여 각종 건설공사에서 흔히 발생할 수 있는 진동공해문제를 억제하고자 하며 아울러 폐기물의 재활용차원에서 폐자재를 이용하여 유용한 제진콘크리트를 개발하고자 하는데 그 목적이 있다. 우선, 제진재료를 이용한 압축강도 200kg/$\textrm{cm}^2$ 이상의 콘크리트 배합비를 찾기 위하여 Pilot실험을 수행하였으며, 선정된 적정배합비에 다른 진동시험제를 제작하여 재료의 동적특성 즉, 1차공명진동수, 동탄성계수 및 감쇠비를 측정하여 제진효과를 조사하였다. 제진재료로서는 Foam, Latex, Rubber Powder 그리고 Plastic Resin 등을 사용하였으며 진동의 감쇠효과가 있는 것으로 나타났다. 실험방법으로는 KS F 2437 규정과 진동파의 속도법을 사용하였으며, 감쇠비 측정은 Frequency Response Spectrum 곡선에 대한 Polynomial Curvefitting방법과 기하학적 해석방법을 이용하여 각각의 결과를 비교.분석하였다.

• 패션비즈니스
• /
• 제12권5호
• /
• pp.77-93
• /
• 2008

The purpose of the study was to examine make-up expression elements of horror characters as an evil spirit, a vampire, a zombie, a monster and a psycho murderer through make-up, focused on horror movies of the United States after1960s. First, an evil spirit was expressed that the pupil grew dim without a focus and the skin was torn by going bad and rot completely. Also, it was expressed that its teeth was changed to pointed canine teeth as a wild beast and its pale and bloodless face showed blood vessels clearly. To express its bloodless and pale skin, air brush was swept into the skin over several times. Its canine tooth was made acryl powder into its shape and was harden to make its shape smooth. Also, it was colored to show people like the real thing. Second, a vampire was expressed by make-up elements as long nails, a sharp canine tooth, a pale skin with a blood vessel and dead eyes. Its rough skin and long nails were manufactured with latex foam, which was colored like the skin. Third, a monster image as a werewolf was expressed by make-up elements as fur, sharp teeth, changed nails and toenails, a rough skin and a face changed to a wolf. Rubber mask and rubber body suit were manufactured as a make-up of special character and so all its body was changed. Fourth, a psycho murderer and body-deformed man were expressed by make-up elements as a distorted mask, swelled-up and deformed skull and face form, terribly deformed body, discolored and hang down skin and teeth with an indeterminate form. Its body and face were manufactured by the foam latex technology according to make-up design as a make-up of special character.

• 생명과학회지
• /
• 제32권2호
• /
• pp.142-147
• /
• 2022

Oxysterols은 콜레스테롤의 산화 유도체로서 죽상경화증(atherosclerosis)에서 병태생리학으로 큰 관련성을 가진다. 본 연구는 oxysterols 중 많은 양을 차지하는 7-ketocholesterol (7-KC)이 단핵구(monocyte)의 분화와 활성화에 미치는 영향을 인간 단핵구세포주 THP-1을 이용하여 조사하였다. 7-KC를 처리한 THP-1 세포는 세포독성 없이 약간의 세포증식이 감소하였고, 세포내 lipids의 양이 크게 증가함을 Nile red 염색에 의해 관찰하였다. 7-KC는 단독으로 세포의 부착능(adhesion)에 영향을 주지 않았지만, phorbol 12-myristate 13-acetate (PMA)로 자극한 THP-1 세포에서는 부착능의 뚜렷한 감소를 나타내었다. 그리고, 형광이 부착된 latex beads를 이용하여 7-KC의 phagocytosis (포식능)를 조사하였다. 7-KC는 PMA로 분화를 자극한 세포의 phagocytosis를 현저히 감소시켰다. 또한, 7-KC를 처리한 THP-1 세포는 대식세포(macrophage)의 막표면 인자인 ICAM-1, CD11a, scavenger receptor(SR, 청소수용체) SR-A1, SR-B2 (CD36)의 발현을 감소시켰다. 하지만, 7-KC는 단독으로 혹은 PMA로 자극한 세포에서도 SR-D1 (CD68)의 발현을 현저히 증가시켰다. 이를 종합하면, 7-KC는 단핵구를 sterols이 풍부한 거품세포(foam cell)로 변형시킴으로써 생리적 자극에 의한 정상적인 단핵구의 분화와 활성화를 저해한다는 것을 시사한다.

• 한국콘텐츠학회논문지
• /
• 제13권3호
• /
• pp.43-53
• /
• 2013

본 논문은 스톱모션 애니메이션 제작에 실제로 사용 가능한 수준의 완성도 높은 퍼핏을 제작하기 위한 공정을 연구 주제로 하며 특히 그 핵심 과정이라 할 수 있는 몰드 제작과 캐스팅 과정을 자세히 다루고 있다. 단순 복제를 목적으로 하는 일반 몰드와 달리 내부에 아마추어를 정확히 고정시킬 수 있고 캐스팅 재료를 안정적으로 주입하거나, 고열의 오븐에 굽는 과정 등이 수차례 반복되는 캐스팅 작업을 견뎌낼 수 있도록 내열성과 내구성을 보강한 고강도 플라스터 몰드와 이중 구조의 재킷 몰드, 폼 라텍스를 재료로 한 캐스팅 과정을 소개한다. 실제 작업 과정에서 예상되는 문제점이나 전문 제작자들의 노하우, 재료 구매처 등을 포함한 작품 제작에 직접적인 도움이 되는 정보를 제공한다.