• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.6
• /
• pp.565-572
• /
• 2013

The sensorless speed control using the improved full-order flux observer for PMSM is proposed in this paper. A conventional full-order flux observer has a drawback that the estimated flux of this observer contains the ripple component at the low speed range due to the increased gains of the convectional full-order flux observer. The improved full-order flux observer with the modified gains guarantee the improved estimation performance without ripple component at the from zero to high speed range. To identify the performance of proposed observer, the simulation and experiment are conducted and this performance is compared with the conventional full-order observer.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.66-70
• /
• 2007

For the design to prevent the saturation of the iron core and the effective fault current limitation, the analysis for the operation of the flux-lock type superconducting fault current limiter (SFCL) with consideration for the hysteresis characteristics of the iron core is required. In this paper, the hysteresis characteristics of the flux-lock reactor, which is an essential component of the flux-lock type SFCL, were investigated. Under normal condition, the hysteresis loss of the iron core in the flux-lock type SFCL does not happen due to its winding structure. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. From the analysis for both the hysteresis curves and the fault current limiting characteristics due to the number of turns for the 1st and 2nd windings, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.108-108
• /
• 2011

기후 변화로 인한 수문 환경의 변화에 따라 수문 모형을 이용한 정확한 예측이 필요하다. 수문 현상의 예측을 위하여 사용되고 있는 수문 모형인 Common Land Model(CLM)은 Soil-Vegetation-Atmosphere Transfer(SVAT) 모형 중 하나로 비교적 적은 변수를 이용하여 현실적인 결과를 도출하므로 세계적으로 널리 이용되고 있다. 이에 반해 국내에서는 모형의 구동을 위한 입력 자료의 미흡으로 인해 실질적인 연구 사례가 부족한 실정이다. 본 연구에서는 해남의 KoFlux 지점을 대상으로 Korea Flux Network(KoFlux) 자료와 Korea Land Data Assimilation System(KLDAS) 자료를 CLM에 강제시켜 국내의 모형의 적용성에 대하여 검증하였다. KoFlux는 에디 공분산 시스템을 기반으로 지표면과 대기 사이의 Flux에 대한 측정 시스템을 운영하며 SVAT 모형의 구동을 위한 수문학적 인자들을 제공하고 있으며, KLDAS는 한반도지표동화자료체계로 위성 및 현장기반 관측 자료들을 지면모형에 적용시켜 자료동화방법을 통하여 지표 변수들을 제공하고 있다. 모형의 산출 결과는 해남 지점의 관측 자료와 비교를 통하여 CLM 모형의 적용 가능성을 검증하였고 두 결과 모두 관측 데이터와의 경향성이 일치하는 것으로 나타났다. 결과 모두 신뢰할 만한 값으로 추정되며, 이를 통하여 국내의 CLM 모형 적용 가능성을 확인하였고, 국내에서의 지점 자료가 부족한 부분에 대한 KLDAS 자료의 이용 가능성 또한 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.268-272
• /
• 1989

To avoid the use of position sensor or flux sensor in a field oriented induction machine drive system, the terminal quantities are often used to estimate the rotor flux. Since the estimation involves the leakage inductance of the machine, the performance of such systems is sensitive to the variations of leakage. Since estimation of the stator flux is independent of the leakage, the steady state performance of the stator flux oriented system is insensitive to the leakage inductance. In this paper, the torque response of stator flux oriented system is compared to that of rotor flux oriented system by digital simulation. And induction motor sensor less speed control by stator flux oriented method is developed. The performance of the speed estimation is showed by digital simulation.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1235-1242
• /
• 2002

The purpose of this study is to estimate wet deposition flux and to investigate wet deposition characteristics by using the ADOM model. Wet deposition flux of highly reactive $SO_2$ is estimated by applying observed meteorological parameters and concentrations of chemical species to the ADOM model. Wet deposition is largely dependent on large scale precipitation and cloud thickness. Wet deposition flux of sulfate depends on $SO_2$ oxidation in clouds. When large amount of $SO_2$ is converted to sulfate, deposition flux of sulfate increases, but wet deposition flux of $SO_2$ is small. On the whole, the pattern of sulfate wet deposition flux agrees with the typical pattern of sulfate wet deposition that is high in the summer(July) and low in the winter(January).

• Journal of Magnetics
• /
• v.18 no.2
• /
• pp.111-116
• /
• 2013

This paper presents a characteristic analysis method of a permanent magnet type transverse flux linear motor (TFLM) with spiral cores. The spiral cores are used as the mover cores in order to make 3-dimensional (3-D) magnetic flux paths at the TFLM which have 3-D magnetic flux flows. The 3-D Equivalent Magnetic Circuit Network Method is used to analyse the magnetic characteristics of the machine, and an imaginary part, 'flux barrier,' is introduced to consider the spiral core characteristic. Magnetic parameters such as flux, inductance, and thrust are calculated from the analysis results. The computed thrust forces are compared to measured values to confirm the accuracy of the analysis.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2005-2007
• /
• 1998

The rotor speed flux information most important in the speed sensorless vector c So in the paper used current voltage model for flux information in a induction motor. Voltage realized low pass filter insted of integrator, c model realized used of current equation. And cur voltage model estimated flux compoed of Pl cont For conpensation of estimated flux error conpansation algorithm using exactly, rapidly flux obtained for conpensation of estimated flux Proposed control system used TMS320C31 DS high speed processing. The effectiveness of proposed method is verified by simulation experimental results. This method shows h characteristic speed estimation highly flux esti and stable, robust character of load regulation.

• Nuclear Engineering and Technology
• /
• v.36 no.3
• /
• pp.203-209
• /
• 2004

In-phantom neutron flux distribution is measured at the HANARO BNCT irradiation facility. The measurements are performed with Au foil and wires. The thermal neutron flux and Cd ratio obtained at the HANARO BNCT facility are $1.19{\times}10^9\;n/cm^{2}s$ and 152, respectively, at 24 MW reactor power. The measured in-phantom neutron flux has a maximum value at a depth of 3 mm in the phantom and then decreases rapidly. The maximum flux is about $25\%$ larger than that of the phantom surface, and the measured value at a depth of 22 mm in the phantom is about a half of the maximum value. In addition, the neutron beam is limited well within the aperture of the neutron collimator. The two-dimensional in-phantom neutron flux distribution is determined. Significant neutron irradiation is observed within 20 mm from the phantom surface. The measured neutron flux distribution can be utilized in irradiation planning for a patient.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.3196-3207
• /
• 1993

A second moment turbulent closure for the turbulent heat flux near a wall is developed by modification of model constants in pressure interaction term as the variables of the turbulent Reynolds number using the universal properties of turbulent heat flux near the wall. The present model shows that model constant for the wall reflection term in pressure interaction is most important in modelling of the near wall heat flux. Fully developed pipe flows with constant wall heat flux are tested to validate the proposed model. In most of calculation region, the predicted turbulent properties agree better with the experimetal data than the results from standard algebraic heat flux model which use the uniform model constants.

• Clean Technology
• /
• v.6 no.2
• /
• pp.101-106
• /
• 2000

A new nonvolatile and nonflammable soldering flux was developed. This flux was synthesized with dichloropropane as its solvent instead of VOC solvents such as isopropanol and methanol etc. which had been used in the conventional flux. It was confirmed that the nonflammable and nonvolatile flux(NFV-flux) was better in insulation resistance, workability, and reliability and that it was better in the enviromment and safety of the working place and more economic in comparison with the conventional flux.