• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.39-52
• /
• 2012

Surface-subsurface interactions are an intrinsic component of the hydrologic response within a watershed. In general, these interactions are considered to be one of the most difficult areas of the discipline, particularly for the modeler who intends simulate the dynamic relations between these two major domains of the hydrological cycle. In essence, one major complexity is the spatial and temporal variations in the dynamically interacting system behavior. The proper simulation of these variations requires the need for providing an appropriate coupling mechanism between the surface and subsurface components of the system. In this study, an approach for modelling surface-subsurface flow and transport in a fully intergrated way is presented. The model uses the 2-dimensional diffusion wave equation for sheet surface water flow, and the Boussinesq equation with the Darcy's law and Dupuit-Forchheimer's assumption for variably saturated subsurface water flow. The coupled system of equations governing surface and subsurface flows is discretized using the finite volume method with central differencing in space and the Crank-Nicolson method in time. The interactions between surface and subsurface flows are considered mass balance based on the continuity conditions of pressure head and exchange flux. The major module consists of four sub-module (SUBFA, SFA, IA and NS module) is developed.

• Molecules and Cells
• /
• v.38 no.2
• /
• pp.138-144
• /
• 2015

Raloxifene is a selective estrogen receptor modulator (SERM) that binds to the estrogen receptor (ER), and exhibits potent anti-tumor and autophagy-inducing effects in breast cancer cells. However, the mechanism of raloxifene-induced cell death and autophagy is not well-established. So, we analyzed mechanism underlying death and autophagy induced by raloxifene in MCF-7 breast cancer cells. Treatment with raloxifene significantly induced death in MCF-7 cells. Raloxifene accumulated GFP-LC3 puncta and increased the level of autophagic marker proteins, such as LC3-II, BECN1, and ATG12-ATG5 conjugates, indicating activated autophagy. Raloxifene also increased autophagic flux indicators, the cleavage of GFP from GFP-LC3 and only red fluorescence-positive puncta in mRFP-GFP-LC3-expressing cells. An autophagy inhibitor, 3-methyladenine (3-MA), suppressed the level of LC3-II and blocked the formation of GFP-LC3 puncta. Moreover, siRNA targeting BECN1 markedly reversed cell death and the level of LC3-II increased by raloxifene. Besides, raloxifene-induced cell death was not related to cleavage of caspases-7, -9, and PARP. These results indicate that raloxifene activates autophagy-dependent cell death but not apoptosis. Interestingly, raloxifene decreased the level of intracellular adenosine triphosphate (ATP) and activated the AMPK/ULK1 pathway. However it was not suppressed the AKT/mTOR pathway. Addition of ATP decreased the phosphorylation of AMPK as well as the accumulation of LC3-II, finally attenuating raloxifene-induced cell death. Our current study demonstrates that raloxifene induces autophagy via the activation of AMPK by sensing decreases in ATP, and that the overactivation of autophagy promotes cell death and thereby mediates the anti-cancer effects of raloxifene in breast cancer cells.

• Membrane Journal
• /
• v.8 no.4
• /
• pp.235-242
• /
• 1998

Pervaporation separation of methyl tert-butyl ether (MTBE) and methanol (MeOH) mixture, of which the former compound is well known as the octane booster was carried out. Poly(vinyl alcohol) (PVA) membranes crosslinked with poly(acrylic acid) which have been successfully applied on the water-alcohol mixtures were used in this study. The PVA/PAA ratio in the crosslinked membranes was 95/5, 90/10, 85/15, 80/20, and 75/25 by weight. The operating temperatures were 30, 40, and 50$\circ$C, and the compositions of MTBE and MeOH to be separated were 95/5, 90/10, and 80/20 (MTBE/MeOH) solutions. PVA/PAA=85/15 membrane showed the separation factor $\alpha_{MeOH/MTBE}$=4000 and the permeation rate of 10.1 g/m$^2$hr for MTBE/MeOH=80/20 solution at 50$\circ$. When the same membrane was used, the separation factor and permeation rate for MTBE/MeOH=90/10 solution at 40$\circ$C were $\alpha_{MeOH/MTBE}$=6000 and 8.5 g/m$^2$hr, respectively. Also, the hydrophilic/hydrophobic balance of the membranes would take an important role in the relationships between the membranes and separation performances in terms of the flux and the separation factor.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2006

Porous chitosan and chitin membranes were prepared by using silica particles as porogen. Membrane preparation was achieved via the following three steps: (1) chitosan film formation by casting an chitosan solution containing silica particles, (2) preparation of porous chitosan membrane by dissolving the silica particles by immersing the film into an alkaline solution and (3) preparation of porous chitin membrane by acetylation of chitosan membrane with acetic anhydride. The optimum preparation conditions which could provide a chitosan and chitin membranes with good mechanical strength and adequate pure water flux were determined. To allow protein affinity, a reactive dye (Cibacron Blue 3GA) was immobilized on porous chitosan membrane. Binding capacities of affinity chitosan and chitin membranes for protein and enzyme were determined by the batch adsorption experiments of BSA protein and lysozyme enzyme. The maximum binding capacity of affinity chitosan membrane for BSA protein is about 22 mg/mL, and that of affinity chitin membrane for lysozyme enzyme is about 26 mg/mL. Those binding capacities are about $several{\sim}several$ tens times larger than those of chitosan and chitin-based hydrogel beads. Those results suggest that the porous chitosan and chitin membranes are suitable in affinity filtration chromatography for large scale separation of proteins.

• Membrane Journal
• /
• v.19 no.4
• /
• pp.277-284
• /
• 2009

In order to select the most suitable membrane to the concentration of vanadium and silica in groundwater, two different commercial NF membrane modules (NE2540-90 and NF90-2540) and three different commercial RO membrane modules (BW30-2540, RE2540-TE, and XLE-2540) were tested. The membrane characteristics test results showed that NE2540-90 module was the most efficient because of higher permeate flux and similar rejection coefficient. Using NE2540-90 module at the transmembrane pressure of $8\;kgf/cm^2$, it was found that the rejection coefficients of vanadium, silica, aluminium, chromium, iron, boron, strontium, and barium were 98.2%, 99.0%, 92.0%, 83.6%, 96.0%, 45.1%, 98.6%, and 69.5%, respectively. It was possible that vanadium and silica contents of groundwater were concentrated into $148.9\;{\mu}g/L$ and 85.8 mg/L respectively by six-stages NF process at the recovery ratio of 15%. The waters produced by NF, which are enriched in vanadium and silica content, are expected to be commercialized the various functional mineral waters.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.487-498
• /
• 2017

In this study, pervaporation performances of water/methanol and water/butanol mixture were evaluated using zeolite 4A membranes manufacutred by FINETECH by experimental works and numerical modeling. Permeation and separation characteristics, such as flux and separation factor, were analyzed by gas chromatography (TCD) and liquid nitrogen traps. Experiments have shown that water is selectively separated from a mixture of water and methanol (separation factor up to approximately 250) and water and butanol (separation factor up to approximately 1,500). Generalized Maxwell Stefan (GMS) theory was implemented to predict pervaporation behaviors of water/alcohol mixtures and diffusional coefficients of zeolite layer were obtained through parameter estimation using $MATLAB^{(R)}$ optimization toolbox. Since the pore size of zeolite 4A are much larger than kinetic diameter of water molecules and smaller than those of methanol and butanol, zeolite 4A membranes can be applied to in situ water removal process such as membrane reactors or hybrid reaction-dehydration process.

• Journal of The Korean Astronomical Society
• /
• v.47 no.5
• /
• pp.167-178
• /
• 2014

We search for misclassified type 1 AGNs among type 2 AGNs identified with emission line flux ratios, and investigate the properties of the sample. Using 4 113 local type 2 AGNs at 0.02 < z < 0.05 selected from Sloan Digital Sky Survey Data Release 7, we detected a broad component of the $H{\alpha}$ line with a Full-Width at Half-Maximum (FWHM) ranging from 1 700 to $19090km\;s^{-1}$ for 142 objects, based on the spectral decomposition and visual inspection. The fraction of the misclassified type 1 AGNs among type 2 AGN sample is ~3.5%, implying that a large number of missing type 1 AGN population may exist. The misclassified type 1 AGNs have relatively low luminosity with a mean broad $H{\alpha}$ luminosity, log $L_{H\alpha}=40.50{\pm}0.35\;erg\;s^{-1}$, while black hole mass of the sample is comparable to that of the local black hole population, with a mean black hole mass, log $M_{BH}=6.94{\pm}0.51\;M_{\odot}$. The mean Eddington ratio of the sample is log $L_{bol}/L_{Edd}=-2.00{\pm}0.40$, indicating that black hole activity is relatively weak, hence, AGN continuum is too weak to change the host galaxy color. We find that the O III lines show significant velocity offsets, presumably due to outflows in the narrow-line region, while the velocity offset of the narrow component of the $H{\alpha}$ line is not prominent, consistent with the ionized gas kinematics of general type 1 AGN population.

• Journal of Environmental Science International
• /
• v.3 no.2
• /
• pp.165-175
• /
• 1994

An emergy analysis of the main energy flows driving the economy of humans and life support systems was made including environmental energies, fuels, and imports, all expressed as solar emjoules. The total emergy use (4, 373 E20 sej/yr) is 90 per cent from imported sources, fuels and goods and services. The emergy flows from the environment are modest, because the share of global inputs such as ruin and geological uplift flux is modest. Consequently, the ratio of outside investment to attracting natural resources is already large, like other industrialized countries. The population level is already in excess of carrying capacity. The emergy use per person in Korea indicates a moderate emergy standard of living, even though the indigenous resource is very poor. If the present economy were running entirely on stored reserves of fuels, soils, woods, etc., it would last about 2 years. Its carrying capacity for steady state on its renewable sources is only 3.3 million people, compared to 43.3 million in 1991. Continued availability of foreign oil at a favorable balance of emergy trade, currently about 7 to 1 net emergy, is the basis for present economic activity and must decrease as the net emergy of foreign oil purchased goes down. Close economic integration with Middle East may determine how long this is possible in the future.

• Journal of Environmental Science International
• /
• v.11 no.7
• /
• pp.637-650
• /
• 2002

This study presents an investigation of the changes of the currents in Kwangyang Bay due to the construction of harbor, reclamation and coastal developments. Currents were simulated by the numerical experiments with a diagnostic multi-level model and using the seasonal oceanographic data of temperature, salinity and ocean current. The values of kinetic and potential energies for the currents were calculated in cases of three topographical changes; before coastal developments, the existing state and after completion of the development project in Kwangyang Bay. The changes of currents due to the coastal developments are as follow; Kinetic energies of tide induced residual currents and wind driven currents decreased by 35~40 percent and 5 percent respectively, however those of density currents increased by 10 percent since the decrease of the coastal areas. Kinetic energy of residual currents including tide induced residual currents, density currents and wind driven currents reduced by 10 percent compared with before the coastal developments. Decrease of current velocity was greatest in summer. Therefore, in summer it was assumed that the Kwangyang Bay is more easily polluted by stratification and decrease of residual current than before the coastal developments carried out.

• The Korean Journal of Ecology
• /
• v.26 no.1
• /
• pp.13-18
• /
• 2003

We examined water flux, concentrations and contents in nutrients in precipitation, throughfall, stemflow and soil solution in natural deciduous hardwood forest(Quercus variabilis and Q. mongolica) in Chunchon, Kangwon Province. The volume of throughfall was 2∼3% higher in Q. variabilis than in Q. monglica while volume of stemflow, Ao, A and B soil solution was 10∼15% higher in Q. variabilis compared to Q. monglica. Concentrations of K/sup +/ increased in throughfall H while concentrations of Ca/sup 2+/, Mg/sup 2+/ and NO₃/sup -/ increased in Ao soil solution. The former might be related to the canopy leaching and the latter related to leaching and nitrification in Ao horizon. Nutrient concentrations in throughfall, Ao, A and B soil solution decreased with increasing amount of water and especially the decreases in concentrations of K/sup +/, Mg/sup 2+/ and Cl/sup -/ were significant. Nutrient concentrations of Ca/sup 2+/ in Ao soil solution was 1.5 times higher in Q. variabilis than in Q. mongolica. However, there were no significant nutrient concentration differences in throughfall, stemflow and A and B soil solution between the two forest types. Stemflow was less than 10% of total water volume (throughfall + stemflow) to the forest floor, and contribution of stemflow to nutrient cycling seemed to be low in the study forest.