• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.107-111
• /
• 2002

A complex valve dynamic analysis has been performed with a high Pressure reciprocating gas compressor. Valve dynamic equations, which take into account the flow continuity and cylinder pressure fluctuation, have been derived. Flow coefficients of valves has been analyzed, using CFD models. Results have shown that both of the suction and discharge values behave favorably without any fluttering motions.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.243-248
• /
• 2022

휴대형, 착용형 전자기기의 활용범위가 넓어지면서, 무겁고 부피가 큰 고체 배터리의 한계점이 드러나고 있으며, 배터리의 역할을 일부 분담할 수 있는 소형 에너지 수확 장치의 개발이 시급한 가운데, 일상 생활 속에서 버려지는 에너지원에 대한 활용도가 중요해지고 있다. 정전발전 기술은 두 물질 표면의 접촉과 분리에 의해 발생되는 마찰대전 효과와 전하유도 현상에 기반해 전기를 생산할 수 있기 때문에, 주변환경에 존재하는 역학적, 기계적 에너지원을 복잡한 중간과정을 거치지 않고도 효과적으로 수확할 수 있다는 장점을 지니고 있다. 인간의 주변환경에 존재하는 에너지원 중에서도 바람에너지는 자연환경에 존재하는 무한한 친환경 에너지원으로써, 그 수확과 활용에 대한 관심이 높은 신재생 에너지원이다. 본 연구에서는 정전발전 기술을 기반으로 하여 이러한 바람에너지의 효과적 수확을 위한 에너지 수확 장치의 최적화와 정전발전 기술의 활용도를 극대화할 수 있는 활용 방안에 대해 분석하였다. Fluttering film을 이용한 Natural wind based Fluttering TENG (NF-TENG)를 개발하였으며, 바람에너지의 효과적 수확을 위해 설계 최적화를 진행하였다. 또한 낮은 전류와 높은 전압을 발생시키는 TENG의 고유 특징을 부각하여 안전한 고전압 발생 시스템을 개발하여 고전압을 요구하는 분야에서의 활용 방안을 제안하였다. 따라서 본 연구에서 도출한 연구 결과는 정전발전 기술을 기반으로 하는 소형 에너지 수확장치를 이용해 일상생활 속에서 버려지는 바람에너지를 수확하여 고전압이 필요한 분야에서 폭넓게 활용할 수 있는 방법으로써 큰 잠재력을 보여줌을 시사한다.

• Annals of Clinical Neurophysiology
• /
• 제12권2호
• /
• pp.70-72
• /
• 2010

We report a 53-year-old male having Kennedy disease who complained of severe bilateral tinnitus and autophony. He was diagnosed as patulous Eustachian tube based on the observation of fluttering motion of the tympanic membrane associated with respiration, which is presumed to occur secondary to bulbar weakness. The patulous Eustachian tube affected the management of his respiratory problem by impairing his ability to tolerate BiPAP. We report this rare condition with a literature review.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.203-206
• /
• 2004

In this study, a numerical analysis has been performed for a three-dimensional pulsatile blood flow associated with the elastic blood vessel and curved bileaflet for multiple cycles in terms of fluid-structure interaction. Here, blood has been assumed as a Newtonian, incompressible fluid. Pressure profiles have been used as boundary conditions at the ventricle and the aorta. From this analysis, the motion of the leaflet has been observed with fluttering phenomenon and rebound, and the flow fields of blood have been obtained with recirculation and regurgitation. The results can contribute to the development of design methodology for the curved bileaflet mechanical heart valve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.1162-1167
• /
• 2001

Suction valve fluttering is generated by reciprocating motions of the piston inhaling and discharging process of gas in the hermetic compressor. A reactive type suction muffler, which produces high pressure-drop because of its complicated flow path, controls the impulsive noise radiated from the flutter of suction valve. The high-pressure drop in the muffler increases the transmission loss, but reduces the EER(Energy Efficiency Ratio) of the compressor. We consider how to design the high acoustic attenuation and low pressure-drop performance to take account of the acoustic and flow performances of the suction muffler. In this study, we identified the suction noise source of compressor from the measurement of the acoustic pulsation and flutter of suction valve. We analyzed the acoustic characteristics of muffler using the finite element method, and compared the experimental and analytical characteristics of flow path of suction muffler. Theoretical predictions and experimental results are compared from the viewpoint of the acoustic performance and energy efficiency of the compressor.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.13-19
• /
• 2016

Atmospheric spray characteristics were experimentally compared between liquid-gas and liquid-liquid sprays of a pintle injector. In order to study spray characteristics, water and air were used as the simulants and the visualization technic was adopted. Spray images were acquired by using a backlight method by a high-resolution CMOS camera. As a result, when the pintle opening distance increased, liquid sheets became unstabled and fluttering droplets increased. In the liquid-gas case, the breakup performance increased as the pressure of gas injected from the annular orifice increased. In the liquid-liquid case, atomization efficiency decreased as the pressure of liquid injected from the annular orifice increased. Spray angles presented a similar trend between two cases. At the same momentum ratio, the spray angle of liquid-liquid case was lower than the angle of liquid-gas case.

• 복식
• /
• 제43권
• /
• pp.15-30
• /
• 1999

The Kosode(小袖) which is a traditional Japanese outfit with a narrower sleeve than the Kimono was worn under the court dress. Korean who first immigrated to Japan wore the Po(袍: the Korean clothes of the time) and introduced the outfit to the japanese people who adopted and integrated it into their daily wear. This outfit was labelled the Kosode(小袖) during the 13th century. The Kosode(小袖) eventually developed throughout centuries into today's Kimono. 기본포(基本袍). Kibonpo(Traditional Korean Basic Outfit), 袍형기본포. Mekibonpo(Traditional korean Outfit with Round Sleeves) 통수포 Tongsupo(Outfit with Narrow Sleeves) 고소데(小袖).Kosode(Traditional Japanese Outifit with narrow Sleeves) 후리소데(振袖). Furisode (Traditional Japanese Outfit with fluttering Sleeves)

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.397-399
• /
• 2007

This paper presents a simple electronic starter for single phase induction motor (SPIM). It replaces the centrifugal switch in the auxiliary winding circuit of the capacitor start type SPIM. The centrifugal switch disconnects the auxiliary winding when the motor gets close to its rated speed. The presence of the centrifugal switch, with its possibly fluttering contacts, reduce reliability of SPIM. The operation principle of the proposed electronic starter is explained, and illustrated with experimental results.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.31-38
• /
• 2021

The energy harvesting system using an inverted flag is analyzed by using an immersed boundary method to consider the fluid and solid interaction. The inverted flag flutters at a lower critical velocity than a conventional flag. A fluttering motion is classified into straight, symmetric, asymmetric, biased, and over flapping modes. The optimal energy harvesting efficiency is observed at the biased flapping mode. Using the three different machine learning algorithms, i.e., artificial neural network, random forest, support vector regression, the energy harvesting efficiency is predicted by taking bending rigidity, inclination angle, and flapping frequency as input variables. The R² value of the artificial neural network and random forest algorithms is observed to be more than 0.9.

• Journal of Mechanical Science and Technology
• /
• 제19권9호
• /
• pp.1761-1772
• /
• 2005

In blood flow passing through the mechanical heart valve (MHV) and elastic blood vessel, hemolysis and platelet activation causing thrombus formation can be seen owing to the shear stress in the blood. Also, fracture and deformation of leaflets can be observed depending on the shape and material properties of the leaflets which is opened and closed in a cycle. Hence, comprehensive study is needed on the hemodynamics which is associated with the motion of leaflet and elastic blood vessel in terms of fluid-structure interaction. In this paper, a numerical analysis has been performed for a three-dimensional pulsatile blood flow associated with the elastic blood vessel and curved bileaflet for multiple cycles in light of fluid-structure interaction. From this analysis fluttering phenomenon and rebound of the leaflet have been observed and recirculation and regurgitation have been found in the flow fields of the blood. Also, the pressure distribution and the radial displacement of the elastic blood vessel have been obtained. The motion of the leaflet and flow fields of the blood have shown similar tendency compared with the previous experiments carried out in other studies. The present study can contribute to the design methodology for the curved bileaflet mechanical heart valve. Furthermore, the proposed fluid-structure interaction method will be effectively used in various fields where the interaction between fluid flow and structure are involved.