• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.4
• /
• pp.1-12
• /
• 2008

The aim of this study is to investigate the sensitivity evaluation of human beings in reacting to the correlated color temperature of the optical properties of white LED lighting. For the sake of this study, white light-emitting diode modules have been fabricated their correlated color temperature have been measured, test cabinets for the sensitivity evaluation have been constructed with the white LED modules, and their sensitivity reactions on the test cabinets have been evaluated and analyzed. The sensitivity reaction has been evaluated by the semantic differential method with 15 selected questions, and the reliability and the content validity of their lighting have been analyzed to 3 factors which foe the activity as the first factor, the stability as the second one, the potency as the third one, respectively. For the data analysis on the sensitivity reaction, the dependent variable is the score of the sensitivity evaluation and the independent one is the correlated color temperature of the test module. The results of this study is as follows: In the case of the sensitive evaluation on the activity and the potency in the white LED lighting compared with the fluorescent lamp, the subjects have made higher mark on $MA_3$ with 8,300[K], and in the factor of the stability, they have made higher mark on $MA_1$ with 3,800[K].

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.420-424
• /
• 2016

In this study, we developed photocatalytic technology to address the emerging serious problem of air pollution through indoor air cleaning. A single layer of $WO_3$ was prepared by using the dry process of general RF magnetron sputtering. At a base vacuum of $1.8{\times}10^{-6}$[Torr], the optical and electrical properties of the resulting thin films were examined for use as a transparent electrode as well as a photocatalyst. The single layer of $WO_3$ prepared at an RF power of 100 [W], a pressure of 7 [mTorr] and Ar and $O_2$ gas flow rates of 70 and 2 sccm, respectively, showed uniform and good optical transmittance of over 80% in the visible wavelength range from 380 [nm] to 780 [nm]. The optical catalyst characteristics of the $WO_3$ thin film were examined by investigating the optical absorbance and concentration variance in methylene blue, where the $WO_3$ thin film was immersed in the methylene blue. The catalytic characteristics improved with time. The concentration of methylene blue decreased to 80% after 5 hours, which confirms that the $WO_3$ thin film shows the characteristics of an optical catalyst. Using the reflector of a CCFL (cold cathode fluorescent lamp) and the lens of an LED (lighting emitting diode), it is possible to enhance the air cleaning effect of next-generation light sources.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.356-363
• /
• 2014

This work was conducted to investigate the field growth and yield of the sweetpotato (Ipomoea batatas) slips grown under different light emitting diodes (LEDs). Sweet potato cuttings of 3 cultivars ('Matnami', 'Shinhwangmi', and 'Yeonhwangmi') were cultivated under fluorescent lamp (FL) and several LEDs (PPF $150{\pm}5{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ at 20cm distance) in deep flow culture system for 20 days. The plants were acclimatized under sunlight for 10 days, and then cuttings (30cm length) were planted with $75{\times}25cm$ planting density on June 10th, covered with black vinyl film during growth period. Length and diameter of vine, number of root were excellent in the red plus blue (7:3) LED than the other treatments. At 30 days after planting, the survival rate in red plus blue (7:3) LED was significantly higher than that in FL and red LED, and it was not different among cultivars. Vine length, vine diameter, and number of node were not significant among LED light qualities and cultivars. After 120 days in the field cultivation, vine length, vine diameter, number of node, number of branch, and fresh weight of shoot were not significant among LED light qualities, but those except the number of branch showed significant differences among cultivars. Yield characteristics among LED light colors were not significant, but weight of storage root per plant, mean weight of storage root, and yield showed significant differences among cultivars. The yield per 10a in 'Matnami', and 'Yeonhwangmi' was significantly higher than that in 'Shinhwangmi'.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.293-300
• /
• 2015

Purpose: To evaluate blue light hazards of LED lightings in an optical store with blue light radiance used as the quantitative indicators of photobiological hazard. Methods: The spectral radiance of each LED lightings was measured, and blue-light radiance and the corresponding maximum exposure time were calculated. Then each LED lighting was classified according to the risk group from IEC 62471 standard. Results: The yellow LED lightings used in showcases and white LED lightings used on ceilings and logo were classified into risk group RG0. But the white LED lightings used on showcases were classified into risk group RG1. The blue light radiances of white LED lightings used in showcases are dozens of times larger than that of fluorescent lamp. Conclusions: Using the value of the blue light radiance could quantitatively express the blue light hazard to various lightings. It was confirmed that white LED lightings for the showcases had high blue light hazards because of their high luminance and color temperature. Therefore, when replacing lightings in optical shop it is necessary to select the appropriate brightness and color temperature for eye health in the long term.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.1
• /
• pp.61-66
• /
• 2010

The purpose of this experiment is to analyze the basic status of brain. Which are consist of rest, attention and concentration, of the brain by measuring the temperature of color by changing RGB color after manufacturing LED-illumination stand. Basic status (rest, attention and concentration) of experimenter were measured temperature of colors having three difference temperature like as $2,300^{\circ}K$, $4,000^{\circ}K$ and $6,000^{\circ}K$. The results was shown that experimenter feels more comfortable and relaxation by decreasing the temperature of color. For example we can see the little increase of concentration index at $4,000^{\circ}K$ condition and we can estimate that right brain can be more activated at the $4,000^{\circ}K$ condition. But we can not find out any different at the $6,000^{\circ}K$ condition. Main cause of no difference from the color temperature was the similarity of color temperature under the general fluorescent lamp. And interface temperature of radiant heat design results LED and PCB was approximately 80 degrees to COMSOL Multiphysics, and changed until approximately 50 degrees until a floor plane of PCB, and verification as arranged chip LED to metal PCB, and it was possible, and a near radiant heat design was confirmed to an approximate value of, as a result, acid manufacture.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.509-513
• /
• 2010

Recently, an amount of waste electronic devices such as LED and trichromatic fluorescent lamp has increased with the development of electronic industry. Reportedly, rare earth metals such as yttrium and europium have been discovered in the waste electronic devices. In order to improve the selectivity of yttrium and europium, the effects of the following factors on recovery experiment have been considered : i) fatty acids with various alkyl chain lengths, ii) the concentration of extractant, and iii) pH. The results show that the extraction efficiencies decrease at the same pH with decreasing the concentration of extractant and so $pH_{0.5}$ (That value of pH in an aqueous phase at which the distribution ratio is unity at equilibrium: 50% of the solute is extracted (E = 0.5) only when the phase ratio is unity.) moves into higher pH. The highest selectivity of yttrium and europium was obtained with tetradecanoic acid as extractant. The extraction mechanism of yttrium and europium was varied with the change of concentration of the tetradecanoic acid. $MR_3$single-species was formed from the yttrium and europium ion in the extractant concentration less than 0.1 M. On the other hand, the yttrium or europium ion is solvated with three molecules of tetradecanoic acid monomer like $MR_3{\cdot}$ 3RH in the extractant concentration more than 0.1 M.

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.81-87
• /
• 2013

Agri-food garlic has been recognized as healthful because of its antibacterial, anticancer and antioxidant effects. As such, its consumption is steadily increasing. This study was conducted to amplify the healthful ingredient of garlic, allicin, using light irradiation. The following conclusions were drawn from the investigation of peeled garlic under various conditions like fluorescent lighting, color (green, yellow, blue and red) and ultraviolet light (UV-A, UV-B and UV-C). The allicin content increased most with the 15-second $0.129W/m^2$ (40 W) UV-B treatment of the garlic at a 700 mm distance from the light source. At the treatment of the garlic with 126 lx (40W) red light for 24 hours at a 700 mm distance from the light source, its allicin content increased from $15.15{\pm}0.25mg/g$ to $15.15{\pm}0.34mg/g$, for a 10-percent amplification effect. Therefore, it is believed that the healthfulness of garlic can be amplified through irradiation processing of its healthful ingredient, allicin, and the development of its processing unit.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.453-461
• /
• 1993

Detection method was developed using a simply designed photochemical reactor made of teflon coil and low pressure mercury lamp. This method of UV photolysis of analytes followed by UV, fluorescence and electrochemical detection was found to be useful for four thiocarbamates. Analytes eluting from the column are irradiated with a high flux of 254 nm UV light, so that they change to either fluorescent active forms or highly electrochemically sensitive products. Appling this technique to the UV detection, thiocarbamates were converted into long wavelength absorbing products upon UV irradiation. In fluorescence detector four thiocarbamates are not detected at nonirradiated condition but fluorescence signals of MPTC, CPTC photolysates are appeared after irradiation with UV light. The electrochemical detection for the determination of thiocarbamates was enhanced up to 5∼20 fold signal after UV irradiation, compared to that of the nonirradiated. The detection limit of thiocarbamates on electrochemical detector was 13.3∼0.02 ng under pH 7.0, ionic strength $0.5{\times}10^{-2}$ M, phosphate buffer solution. Adducts produced by reaction of photolysates and OPA-MERC in the reaction coil were monitored at 425 nm with fluorescence detector, and one of the photolysates was primary amine.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.3 s.47
• /
• pp.597-608
• /
• 1994

This study was conducted to evaluate the relationships between the environmental exposure and biological monitoring among workers exposed to metallic mercury We interviewed each workers to get the medical history including previous hazardous occupational history. We measured the respiration rate and tidal volume of each worker in order to calculate the 8-hour inhaled mercury of workers. And we wafted to evaluate the effect of exposure duration to mercury concentrations in blood and urine as biologic exposure indices of metallic mercury. The regression and correlation analysis were done to the relationships of 8-hour inhaled mercury and mercury in blood and urine. The results were as follows; 1. The subjects were 35 fluorescent lamp manufacturing workers. The mean age of subjects was .24.8 years old, and the mean work careers of workers was 1.19 years. 89% of the total was consisted man. 2. The correlation coefficients between 8-hour inhaled mercury and mercury in blood and urine were higher than that of only considered air mercury concentration. 3. The correlation coefficients of 8-hour inhaled mercury and mercury in blood and urine were above 0.9 in workers who had exposed to mercury more than 1 year 4. The R-square value and -value of regression analysis between the 8-hour inhaled mercury and mercury in blood and urine was also higher in workers who had exposed to mercury over 1 year than in workers who had less than 1 year working experience. The important results of this study were that relationships between the 8hr-inhaled mercury and mercury in blood and urine was very high than that with air mercury concentration only. And the results were very apparent when considering workers 1 year or more. Therefore we concluded that the work career and respiratory volume of each individuals should be considered in evaluation the, results of biological monitoring of workers exposed to metallic mercury.