• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4322-4328
• /
• 2022

The two-fluid model is widely used to describe two-phase flows in complex systems such as nuclear reactors. Although the two-phase flow was successfully simulated, the standard two-fluid model suffers from an ill-posed nature. There are several remedies for the ill-posedness of the one-dimensional (1D) two-fluid model; among those, artificial viscosity is the focus of this study. Some previous works added artificial diffusion terms to both mass and momentum equations to render the two-fluid model well-posed and demonstrated that this method provided a numerically converging model. However, they did not consider mass conservation, which is crucial for analyzing a closed reactor system. In fact, the total mass is not conserved in the previous models. This study improves the artificial viscosity model such that the 1D incompressible two-fluid model is well-posed, and the total mass is conserved. The water faucet and Kelvin-Helmholtz instability flows were simulated to test the effect of the proposed artificial viscosity model. The results indicate that the proposed artificial viscosity model effectively remedies the ill-posedness of the two-fluid model while maintaining a negligible total mass error.

• 대한교통학회지
• /
• 제27권1호
• /
• pp.27-34
• /
• 2009

도로교통망의 시스템변화에 대한 효과분석의 일환으로 1979년 Herman이 제시한 Two-Fluid Model을 적용하여 거시적인 교통류 변화특성을 분석하였으며, 이를 통해 도로시설의 운영개선 효과를 정량적으로 확인하였다. 본 연구에서는 일반국도 3호선 의정부 전체 구간의 약 8km, 총 31개 신호교차로를 분석 대상으로 하며, TSIS CORSIM 및 Run Time Extension을 이용한 미시적 시뮬레이션 분석으로 현황 및 개선 대안에 대한 개별차량의 주행정보를 추출하였다. Two-Fluid Model의 파라메타 산출결과 현황 대비 신호제어시스템 개선 시 네트워크의 서비스 질을 의미하는 단위거리 당 평균최소통행시간(Tm)은 약 35% 감소하였으며, 네트워크 수요증가에 대한 저항성을 의미하는 파라메타 n은 약 28%의 향상된 결과를 나타내었다. 국도 축을 대상으로 하는 시뮬레이션 기반의 자료 수집으로 인해 제한된 연구결과이나 Two-Fluid Model이 신호 최적화 및 연동형 반감응제어의 적용 등 신호제어시스템 개선에 대한 우수한 거시적 효과평가 지표로 활용되어 질 수 있음을 확인하였다.

• 한국멀티미디어학회논문지
• /
• 제12권2호
• /
• pp.323-328
• /
• 2009

게임이나 가상현실 등에서 사용자들에게 사실성과 몰입 감을 주기 위해서 자연 현상들을 시뮬레이션하고 있다. 게임이나 가상현실에서 물이나 바다와 같은 유체를 3차원으로 시뮬레이션 하는데 있어서 중요한 요소는 실시간 처리와 사실성이다. 유체 모델은 특정 상황에 따른 다양한 방정식과 많은 파라미터 값에 의해 제어되기 때문에 시뮬레이션 하는데 많은 어려움이 따른다. 또한 복잡한 물리 수식을 기반으로 하기 때문에 유체 모델을 시뮬레이션하기 위해서는 많은 수행 시간이 소요된다. 본 논문에서는 실시간 유체와 강체(rigid body) 사이의 상호작용을 표현하기 위해 간략화 된 유체 표면 모델(Fluid-Surface Model)을 제안하고, 개선된 계산과정을 통해 보다 빠르게 시뮬레이션 하도록 한다. 또한 본 논문에서는 유체의 표면과 강체의 상호작용을 표현하는데 있어서 유체의 항력에 의해서 강체와 충돌 시 발생하는 유체 표면의 움직임을 나타낸다. 본 논문에서 제안하는 자연스러운 유체 표면 모델은 유체역학적 방법을 사용하여 실시간에 사실적으로 표현된다. 그리고 이러한 유체 표면 모델을 PC 환경에서 사용자와 상호작용 가능하도록 재현하여, 게임이나 애니메이션에서의 유체 모델들에도 적용할 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.350-355
• /
• 2005

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR Product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant Properties; the minor loop property and the wiping-out property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.323-328
• /
• 2002

The control performance of a vehicle installed with an MR(magnetorheological) fluid-based damper is investigated on the basis of Herschel-Bulkley shear model. Generally, most of MR fluid damper has been analyzed based on a simple Bingham-plastic shear model. However, the Bingham-plastic shear model can not well describe the behavior of the damper on the condition of high velocity and high current field input. Therefore, in this study, the Herschel-Bulkley shear model in which the constant post-yield plastic viscosity in Bingham model is replaced with a power law model dependent on shear rate is used to assess control performance of a vehicle with MR fluid damper suspension system. This study deals with a two-degree-of-freedom suspension using the MR fluid damper for a quarter car model. The response for the bump input to identify the fastness of MR fluid damper embedded skyhook controller and requested magnetic field are investigated.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.3-11
• /
• 2006

This paper presents a new approach for hysteresis modeling of a magnetorheological (MR) fluid. The field-dependent hysteresis of MR fluid is investigated using the Preisach model. The commercial MR product (MRF-132LD, Lord Corporation) is employed. Its field-dependent shear stress is then obtained using a rheometer (MCR 300, Physica). In order to show the applicability of the Preisach model to the MR fluid, two significant properties; the minor loop property and the wiping-out. property are experimentally examined. Subsequently, the Preisach model for the MR fluid is identified using experimental first order descending (FOD) curves in discrete manner. The effectiveness of the identified hysteresis model is verified in the time domain by comparing the predicted field-dependent shear stress with the measured one. In addition, the hysteresis model proposed in this work is compared to Bingham model.

• 유공압시스템학회논문집
• /
• 제8권4호
• /
• pp.1-8
• /
• 2011

Injection molding machine is the assembly of many kinds of mechanical and fluid power part and electro-electronic control system. From in these, fluid power is a part where becomes the first core of this machine. Fluid power systems of injection molding machine are modelled and analyzed using a commercial program AMESim. The analysis model which is detailed about the parts applied a publishing catalog data. Sub system models which is divided according to functional operation are made and its analysis results shows how design parameters work on operational characteristics like displacement, pressure, flow rates at each node and so on. Total fluid power circuit model is also made and analyzed. The results made by analysis will be used design of fluid power circuit of injection molding machine.

• 소음진동
• /
• 제5권3호
• /
• pp.373-383
• /
• 1995

From the viewpoint of the structural design, the principal problem of the heat exchanger is the potentiality of structural instabilities due to the fluid loading effect during operations. Excessive fluid loading may give rise to permanent deformation of tube and would enentually result in collapse of heat exchanger, which would cause an obstruction of the fluid flow in the narrow channels. In this study, a fluid-structural interaction model was developed to investigate analtically the vibration characteristics of thin rectangular tube used in the heat exchanger. The model consists of two flat plates separated by fluid. The effects of the fluid in the tube was stuided. For analyses, the natural frequency coefficients of the model were investigated for the plate aspect ratios, channel heights, and boundary conditions. As conclusions, the natural frequency coefficients of the tube is found to be affected largely by the fluid loading and the channel heights.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제17권3호
• /
• pp.209-219
• /
• 2013

The present paper deals with the extension of AUSMPW+ scheme into two-fluid model for multiphase flow. AUSMPW+ scheme is the improvement of a single-phase AUSM+ scheme by designing pressure-based weighting functions to prevent oscillations near a wall and shock instability after a strong shock. Recently, Kitamura and Liou assessed a family of AUSM-type schemes with two-fluid model governing equations [K. Kitamura and M.-S. Liou, Comparative study of AUSM-Family schemes in compressible multi-phase flow simulations, ICCFD7-3702 (2012)]. It was observed that the direct application of the single-phase AUSMPW+ did not provide satisfactory results for most of numerical test cases, which motivates the current study. It turns out that, by designing pressure-based weighting functions, which play a key role in controlling numerical diffusion for two-fluid model, problems reported in can be overcome. Various numerical experiments validate the proposed modification of AUSMPW+ scheme is accurate and robust to solve multiphase flow within the framework of two-fluid model.

• 스마트미디어저널
• /
• 제4권2호
• /
• pp.9-16
• /
• 2015

Fluids appear in innumerable phenomena; therefore, it is interesting to reproduce those phenomena by computer graphics techniques. However, this process is not trivial. We work with a fluid simulation that uses Navier-Stokes equations to model the fluid, a semi-Lagrangian approach to solve it and the level set method to track the surface of the fluid. Modified versions of the Navier-Stokes equations for computer graphics allow us to create a wide diversity of effects. In this paper, we propose a technique that allows us to integrate a force inspired by surface tension into the model. We describe which information we need and how to modify the model with this new approach. We end up with a modified simulation that has additional effects that might be suitable for computer graphics purposes. The effects that we are able to recreate are small waves and droplet-like formations close to the surface of the fluid. This model preserves the overall behavior governed by the Navier-Stokes equations.