• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1575-1583
• /
• 2000

Recently, the sandwich injection molding has drawn attention because it offers the flexibility of using the optimal properties of two different but compatible polymers and is also one of the most p romising methods in connection with recycling of thermoplastics. In this paper, a new particle tracing algorithm is presented in order to describe the advancement of core polymer melt during filling stage. The main advantage of this algorithm is the use of identity field information rather than tracking a set of fluid particles. In addition, to model the process accurately, especially to detect the possible

• Journal of Korean Neurosurgical Society
• /
• v.58 no.2
• /
• pp.144-146
• /
• 2015

Postdural punctural headache (PDPH) following spinal anesthesia is due to intracranial hypotension caused by cerebrospinal fluid (CSF) leakage, and it is occasionally accompanied by an intracranial hematoma. To the best of our knowledge, an intracranial chronic subdural hematoma (CSDH) presenting with an intractable headache after a cervical epidural steroid injection (ESI) has not been reported. A 39-year-old woman without any history of trauma underwent a cervical ESI for a herniated nucleus pulposus at the C5-6 level. One month later, she presented with a severe headache that was not relieved by analgesic medication, which changed in character from being positional to non-positional during the preceding month. Brain magnetic resonance imaging revealed a CSDH along the left convexity. Emergency burr-hole drainage was performed and the headache abated. This report indicates that an intracranial CSDH should be considered a possible complication after ESI. In addition, the event of an intractable and changing PDPH after ESI suggests further evaluation for diagnosis of an intracranial hematoma.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.149-156
• /
• 2007

Non-contact transportation of the large-sized glass plate using air-cushion is considered for sputtering system of LCD panel. The Argon gas from second gas injection holes is injected to levitate and transport the glass plate. Low maximum pressure and uniform pressure distribution on the bottom surface of the glass plate must be maintained for stable levitation and transportation of the glass plate. Therefore, the analysis of fluid flow between the glass plate and the air-pad is numerically performed for varying space between the injection holes in this study. The pressure uniformity on the bottom surface of the glass plate is evaluated for overall glass plate. The distance between the injection holes must be designed below 90 mm for obtaining the low maximum pressure and uniform pressure distribution.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.919-924
• /
• 2000

Spray impingement model and fuel film formation model were developed and incorporated into the computational fluid dynamics code, STAR-CD. The spray/wall interaction process were modelled by considering the change of behaviour with surface temperature condition and fuel film formation. We divided behaviour of fuel droplets after impingement into stick, rebound and splash using Weber number and parameter K. Spray impingement model accounts for mass conservation, energy conservation and heat transfer to the impinging droplets. A fuel film formation model was developed by Integrating the continuity, the Navier-Stokes and the energy equations along the direction of fuel film thickness. The validation of the model was conducted using diesel spray experimental data and gasoline spray impingement experiment. In all cases, the prediction compared reasonably well with experimental results. Spray impingement model and fuel film formation model have been applied to a direct injection diesel engine combustion chamber.

• Journal of the Korean Society of Visualization
• /
• v.16 no.1
• /
• pp.42-47
• /
• 2018

A needle-free injector is one of the new non-invasive players in impregnating the biological barriers. It is considered as the next phase in drug delivery and therapeutic applications. One of the major fields of application is in skin remodeling procedures. Although many studies were carried out in understanding the principle in the needle-free injection procedure, fewer studies were done with the aim of therapeutic applications. In the present study, we tried to identify key parameters that affect the jet divergence and peak stagnation pressure on the skin surface in a conventional needle-free injector for skin treatment. A summary of the working principle and effect of the key parameters are presented.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1991

The purpose of this study is to lay groundwork for a complete analysis of two component flow by analyzing a single component flow made of continuous fluid without dispersed phase. In order to achieve uniform velocity distributions which are desirable in designing an optimum spray column direct contact heat exchanger, the influence of injection nozzle orientation has been investigated for axial and radial injections. The results that radial injection ensures more uniform velocity distributions compared to the axial case. The flow characteristics in a spray column have been investigated with various L/D values and inlet velocities, the most uniform internal velocity distributions have been obtained for the case of L/D=10 and 0.1m/sec. In the present investigation, it is shown that radial injection method for the continuous flow is advantageous in obtaining desirable uniform velocity distributions in a spray column. It is also found that as the value of L/D increases and the inlet velocity decreases, the flow improves to be better uniform velocity distributions.

• Journal of Drive and Control
• /
• v.13 no.2
• /
• pp.51-58
• /
• 2016

The present study deals with the issue of clamping force control of an injection molding machine using 2-way cartridge valve based logic circuit. The operating principle for the cartridge valve is described with its construction and static opening behavior. Basic module circuits are designed first and analysed according to the basic functions. Then they are combined with a virtual design model for the clamping mechanism to simulate the control performance of the overall system. The backlash inherent in the mechanism is considered while evaluating the time-delay in the process of clamping force build-up. The effects of a couple of design parameters in backlash, i.e., interval and stiffness have been demonstrated in the time-domain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.673-674
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.769-770
• /
• 2007

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.5
• /
• pp.24-32
• /
• 1988

본 고에서는 일점연료분사시스템의 문제점을 해결하는 방안 및 장래 유망하다고 보여지는 희박혼합기상태에서 연소상태의 개선을 목적으로, 연료분사밸브로서 미립화특성이 좋은 2유체 분사밸브를 사용하기 위하여 기술하고자 한다.