• 대한토목학회논문집
• /
• 제38권5호
• /
• pp.627-634
• /
• 2018

본 연구에서는 바람의 영향을 받는 박스형 콘크리트 거더교에 대한 풍력계수를 산정하기 위하여 전산유체해석(CFD)를 수행하였다. 방음벽이 없는 교량 단면에 대한 항력계수, 양력계수 및 비틀림모멘트계수를 산정하였고, 이 풍력계수 값들을 다양한 높이의 방음벽을 갖는 교량 단면에 대한 풍력계수 값들과 비교하였다. 전산유체해석에서 풍력계수들을 산정할 때 전단응력수송(SST) $k-{\omega}$ 난류 모델을 적용하였고, 마찰 항력계수가 전체 항력계수에 미치는 기여도를 조사하였다. 연구 결과, 바람이 수평으로 불 때 항력계수는 방음벽의 높이가 커질수록 증가하였고, 마찰 항력의 기여도는 교량 단면에 방음벽이 없을 때 가장 높았다. 따라서 교량설계에서 풍력을 산정할 때 방음벽의 높이의 영향을 고려할 필요가 있으며, 벽면 마찰력은 교량에 작용하는 풍력을 산정할 때 중요한 역할을 하였다.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.219-228
• /
• 2010

텀블형 드럼 건조기의 적외선 건조 과정동안의 온도 및 수분량의 변화를 예측할 수 있는 2 차원 수학적 모델을 개발하였다. 본 모델에서는 건조대상 물질의 액체 수분의 이동과 건조공기의 유동 및 열전달을 고려하였다. 유체의 유동과 열전달 현상, 그리고 복사열전달은 유한체적법을 이용하여 해석하였다. 텀블 건조기의 2 차원 모델을 모사하기 위한 지배방정식을 소개한 후 적외선 히터, 히터의 온도, 그리고 가열 패턴에 따른 수치해석을 수행하였고, 적외선 히터를 도입함으로써 건조시간을 감소시킬 수 있음을 제시하였다.

• 대한간호학회지
• /
• 제25권3호
• /
• pp.457-471
• /
• 1995

This research was done to promote improvement of practical application of nursing diagnoses and to improve the quality of nursing. The subjects of this research were 156 second year students of C junior nursing college who were giving adult patient care. The nursing diagnoses of 312 reports were analyzed using NANDA. In these case reports only nursing diagnoses were considered, of which there were a total of 982. In the data analysis the 9H of the nursing students' nursing diagnoses matched with 105 NANDA nursing diagnoses, Of these, the most frequent diagnoses were pain(165, 17.48%), anxiety(101, 10.70%), alteration in nutrition(83, 8.79%) , sleep disturbance (67, 7.10%), in activity intolerance (67, 7.10%), ineffective breathing pattern(51,5.40%). The etiology for the students' nursing diagnoses were compared with NANDA's nursing diagnoses by frequency. The most frequent etiology for the nursing diagnoses of pain was a biological etiology(50, 31%), for anxiety, situation crisis(58, 57.43%), for alteration in nutrition, indigesion(23, 27.71%), for sleep disturbance, external etiology(25, 37.32%), for activity intolerance, immobile position(22, 32.84%), for ineffective breathing pattern, pain(35, 68.63%), and for ,impaired physical mobility, pain(31, 65.96%). The most frequent etiology for constipation was inadquate digestion of water and cellulose (16, 34.78%), for fluid volume felicity, loss of body fluid (21, 52.50%), for impaired skin integrity, external etilogy(16, 43.24%), for impaired physical mobility, pain(22, 62.86%) , for knowledge deficits, cognition disturbance(9, 27.27％), for ineffective air way clearance, secretion obstruction(14, 48.27%) , for impaired gas exchange, loss of transport ability of blood oxygen(9, 37.50%) , and for powerlessness, therapy environment (5, 22.73%). The number of nursing diagnoses by pattern was exchange(16), moving(6), feeling(4), choosing(4), relating(3), communication(1), perceiving(1), knowing(1), valuing(1).

• 한국음향학회지
• /
• 제39권4호
• /
• pp.364-370
• /
• 2020

우주 발사체의 초음속 플룸으로부터 발생하는 고강도 소음은 발사체에 음향하중으로 작용하여 전장품이나 탑재 위성의 오작동 및 고장을 유발한다. 음향하중을 발생시키는 로켓/제트소음의 예측은 초음속 난류 유동(소음원) 예측을 위한 전산유체해석과 음향(소음 전파) 해석이 결합된 모델이 주로 사용된다. 이때, 유동해석 시 계산영역 경계면에서 발생하는 반사파 아티팩트를 제거하기 위해 경계조건 외에 추가적으로 흡수층(sponge layer)과 같은 모델링이 적용된다. 하지만, 해석 대상에 따라 흡수층의 파라미터 최적화 연구가 선행되어야 하고 더 큰 계산 영역을 필요로 하기 때문에, 이는 해석시간 증가의 주요 요인이 된다. 이에 본 논문에서는 계산효율을 증대시키기 위해 흡수층 대신 유동해석 결과에 존재하는 반사파 아티팩트를 두 개의 마이크로폰 기법을 기반으로 하여 제거하는 방법을 처음으로 제안하고, 이를 실제 소형 초음속 제트소음 해석 결과에 적용하였다.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.20-25
• /
• 2012

During drilling, the precipitation velocity of cuttings within an annulus depends on the density and configuration of the cuttings, and on the density, viscosity, and rheological characteristics of the drilling fluid. In directional drilling in particular, it is difficult to adjust and control the cuttings. In contrast to vertical drilling, it is very important to evaluate the flow characteristics of a drilling flow field. However, research on the transfer features of cuttings is inadequate. In this study, in order to identify transfer features of cuttings, an experiment was performed under wide-ranging conditions by constructing a slim hole annulus ($44mm{\times}30mm$) device. In this experiment, the particle volume fraction were influenced by particle size, particle concentration within the flow, pipe rotation, flow volume, and inclination of the annulus. In addition, a mathematical formula for volumetric concentration was deduced and compared to the test results and behavior of cuttings under the other drilling condition was made to be predicted. Therefore, this study can provide meaningful data for vertical and horizontal drilling, and for directional drilling.

• Asian Journal of Atmospheric Environment
• /
• 제2권2호
• /
• pp.81-89
• /
• 2008

The numerical simulation of wind and ozone ($O_3$) transport in mountainous regions was performed with a computational fluid dynamics technique. A dry deposition model for $O_3$ was designed to estimate $O_3$ deposition in complex terrain, and the qualitative validity of the predicted $O_3$ concentration field was confirmed by comparison with observed data collected with passive samplers. The simulation revealed that wind velocity increases around ridge lines and peaks of mountains. The areas with strong wind corresponded well with the sites of tree decline at high altitudes, suggesting that it is an important factor in the localization of tree/forest decline. On the other hand, there is no direct relationship between forest decline and $O_3$ concentration. The $O_3$ concentration, however, tends to increase as wind velocity becomes higher, thus the $O_3$ concentration itself may be a potential secondary factor in the localized decline phenomena. While the diffusion flux of $O_3$ is not related to localized tree decline, the pattern of advection flux is related to those of high wind velocity and localized tree decline. These results suggest that strong wind with large advection flux of $O_3$ may play a key role in the promotion of tree/forest decline at high mountain ridges and peaks.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.746-751
• /
• 2014

본 논문에서는 소스 코드가 공개된 라이브러리를 이용하여 선박의 성능을 예측할 수 있는 해석 코드를 개발하였다. 질량보존 방정식, 모멘튼 보존방정식, 난류를 고려하기 위해 난류모델과 벽함수를 고려하였다. 자유수면 계산을 위해 볼륨비 수송방정식을 고려하였고, 자유수면의 정확도 높은 계산을 위해 고차 도식을 포함하는 라이브러리를 개발하였다. 개발한 프로그램을 컨테이너선인 KCS에 적용한 결과 실험에서 포착된 자유수면 분포를 잘 예측하였다. 자항성능 평가 시 추진기 회전을 위해 GGI 라이브러리를 사용하였다. 계산결과 실험과 비교해 약 7 % 정도의 정확도로 자항성능을 예측하였다. 캐비테이션 예측을 위해 이상 균질 모델을 포함하는 새로운 라이브러리를 개발하였다. 이상 균질 모델을 추진기에 적용한 결과 일반적으로 발생하는 얇은 층 캐비테이션을 잘 예측하는 것을 확인하였다. 오픈 소스 라이브러리를 이용하여 개발한 수치수조를 KCS에 적용한 결과 오픈 소스 라이브러리에 대한 가능성을 확인하였다.

• 한국해양공학회지
• /
• 제35권1호
• /
• pp.50-58
• /
• 2021

The demand for eco-friendly energy is expected to increase due to the recently strengthened environmental regulations. In particular, the flow inside the pipe used in a cargo handling system (CHS) or fuel gas supply system (FGSS) of hydrogen transport ships and hydrogen-powered ships exhibits a very complex pattern of multiphase-thermal flow, including the boiling phenomenon and high accuracy analysis is required concerning safety. In this study, a feasibility study applying the boiling model was conducted to analyze the multiphase-thermal flow in the pipe considering the phase change. Two types of boiling models were employed and compared to implement the subcooled boiling phenomenon in nucleate boiling numerically. One was the "Rohsenow boiling model", which is the most commonly used one among the VOF (Volume-of-Fluid) boiling models under the Eulerian-Eulerian framework. The other was the "wall boiling model", which is suitable for nucleate boiling among the Eulerian multiphase models. Moreover, a comparative study was conducted by combining the nucleate site density and bubble departure diameter model that could influence the accuracy of the wall boiling model. A comparison of the Rohsenow boiling and the wall boiling models showed that the wall boiling model relatively well represented the process of bubble formation and development, even though more computation time was consumed. Among the combination of models used in the wall boiling model, the simulation results were affected significantly by the bubble departure diameter model, which had a very close relationship with the grid size. The present results are expected to provide useful information for identifying the characteristics of various parameters of the boiling model used in CFD simulations of multiphase-thermalflow, including phase change and selecting the appropriate parameters.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.62-67
• /
• 2022

Liquid hydrogen (LH₂) has a higher density than gaseous hydrogen, so it has high transport efficiency and can be stored at relatively low pressure. In order to use efficient bulk hydrogen in the industry, research for the LH₂ supply system is needed. In the high-pressure hydrogen station based on LH₂ currently being developed in Korea, a heat exchanger is used to heat up supercritical hydrogen at 700 bar and 60 K, which is pressurized by a cryogenic high-pressure pump, to gas hydrogen at 700 bar and 300 K. Accordingly, the heat exchanger used in the hydrogen station should consider the design of high-pressure tubes, miniaturization, and freezing prevention. A helical heat exchanger generates secondary flow due to the curvature characteristics of a curved tube and can be miniaturized compared to a straight one on the same heat transfer length. This paper evaluates the heat transfer performance through parametric study on the distance between coils, guide effect, and anti-icing design of helical heat exchanger. The helical heat exchanger has better heat transfer performance than the straight tube exchanger due to the influence of the secondary flow. When the distance between the coils is uniform, the heat transfer is enhanced. The guide between coils increases the heat transfer performance by increasing the heat transfer length of the shell side fluid. The freezing is observed around the inlet of distribution tube wall, and to solve this problem, an anti-icing structure and a modified operating condition are suggested.

• 설비공학논문집
• /
• 제20권12호
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.