Acknowledgement
This research was a part of the project titled 'Development of Safety and Control Standards for Hydrogen Ships: Cargo Handling and Fuel Gas Supply Systems', funded by the Ministry of Oceans and Fisheries, Korea. This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean Government (MSIT) (No. 2020R1I1A3072459)
References
- Alglart, H. (1993). Modeling of Vapour Generation at Wall in Subcooled Boiling Two-phase Flow. In First CFDS International User Conference, Oxford, UK, 183-207.
- Alglart, H., & Nylund, O. (1996). CFD Application to Prediction of Void Distribution in Two-phase Bubbly Flows in Rod Bundles. Journal of Nuclear Engineering and Design, 163(1-2), 81-98. https://doi.org/10.1016/0029-5493(95)01160-9
- Bartolemei, G.G., & Chanturiya, V.M. (1967). Experimental Study of True Void Fraction When Boiling Subcooled Water in Vertical Tubes. Journal of Thermal Engineering, 14(2), 123-128.
- Bergles, A.E., & Rohsenow, W.M. (1964). The Determination of Forced-Convection Surface-Boiling Heat Transfer. Journal of Heat Transfer, 86(3), 365-372. https://doi.org/10.1115/1.3688697
- Chen, E., Li, Y., & Cheng, X. (2009). CFD Simulation of Upward Subcooled Boiling Flow of Refrigerant -113 Using the Two-fluid Model. Applied Thermal Engineering, 29(11-12), 2508-2517. https://doi.org/10.1016/j.applthermaleng.2008.12.022
- Cole, R. (1960). A Photographic Study of Pool Boiling in the Region of the Critical Heat Flux. AlChE Journal, 6(4), 533-538. https://doi.org/10.1002/aic.690060405
- Domalapally, P., Rizzo, E., Richard, L.S., Subba, F., & Zanio, R. (2012). CFD Analysis of Flow Boiling in the ITER First Wall. Fusion Engineering and Design, 87(5-6), 556-560. https://doi.org/10.1016/j.fusengdes.2012.01.024
- Gu, J., Wang, Q., Wu, Y., Lyu, J., Li, S., & Yao, W. (2017). Modeling of Subcooled Boiling by Extending the RPI Wall Boiling Model to Ultra-high Pressure Conditions. Applied Thermal Engineering, 124, 571-584. https://doi.org/10.1016/j.applthermaleng.2017.06.017
- Jeong, T.W. (2019). Vessel Greenhouse Gas (GHG) Reduction Strategy Technology and Prospect. KRISO.
- Ji, C., & El-Halwagi, M.M. (2020). A Data-driven Study of IMO Compliant Fuel Emissions with Consideration of Black Carbon Aerosols. Journal of Ocean Engineering, 218, 108-241. https://doi.org/10.1016/j.oceaneng.2020.108241
- Kocamustafaogullari, G., & Ishii, M. (1983). Interfacial Area and Nucleation Site Density in Boiling Systems. International Journal of Heat and Mass Transfer, 26(9), 1377-1387. https://doi.org/10.1016/S0017-9310(83)80069-6
- Koncar, B., Kljenak, I., & Mavko, B. (2004). Modeling of Local Two-phase Flow Parameters in Upward Subcooled Flow Boiling at Low Pressure. International Journal of Heat and Mass Transfer, 47(6-7), 1499-1513. https://doi.org/10.1016/j.ijheatmasstransfer.2003.09.021
- Krepper, E., Koncar, B., & Egorov, Y. (2007). CFD Modeling of Subcooled Boiling - Concept, Validation and Application to Fuel Assembly Design. Journal of Nuclear Engineering and Design, 237(7), 716-731. https://doi.org/10.1016/j.nucengdes.2006.10.023
- Krepper, E., & Rzehak, R. (2011). CFD for Subcooled Flow Boiling: Simulation of DEBORA Experiments. Nuclear Engineering and Design, 241(9), 3851-3866. https://doi.org/10.1016/j.nucengdes.2011.07.003
- Kurul, N. (1990). Multidimensional Effects in Two-phase Flow Including Phase Change (Ph.D. Thesis). Rensselaer Polytechnic Institute.
- Kurul, N., & Podowski, M.Z. (1991). On the Modeling of Multidimensional Effects in Boiling Channels. Proceedings of the 27th National Heat Transfer Conference, Minneapolis, Minnesota, 301-314.
- Lee, J.M., Kim, J.H., Kim, S.G., Kim, T.W., & Kim, M.S. (2019). Hydrogen Fuel Cell Ship Overview and Technology Development Trend Introduction. Journal of the Korean Society of Shipbuilding, 56, 3-9.
- Lee, T.H., Park, G.C., & Lee, D.J. (2002). Local Flow Characteristics of Subcooled Boiling Flow of Water in a Vertical Concentric Annulus. International Journal of Multiphase Flow, 28(8), 1351-1368. https://doi.org/10.1016/S0301-9322(02)00026-5
- Lemmert, M., & Chawla, J.M. (1977). Influence of Flow Velocity on Surface Boiling Heat Transfert Coefficient. Heat Transfer in Boiling, 111-116.
- Nemitallah, M.A., Habib, M.A., Mansour, R.B., & Nakla, M.E. (2015). Numerical Predictions of Flow Boiling Characteristics: Current Status, Model Setup and CFD Modeling for Different Non-uniform Heating Profiles. Applied Thermal Engineering, 75, 451-460. https://doi.org/10.1016/j.applthermaleng.2014.09.036
- Park, H.S. (2019). IMO Aims to Reduce Greenhouse Gas by 40%, by 2030. KMI.
- Rogers, J.T., & Li, J.H. (1994). Prediction of the Onset of Significant Void in Flow Boiling of Water. Journal of Heat Transfer, 116(4), 1049-1053. https://doi.org/10.1115/1.2911444
- Rohsenow, W.M. (1952). A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids. Transactions of the ASME, 74, 969.
- Sontireddy, V.R., & Hari, S. (2016). Subcooled Boiling: Validation by Using Different CFD Models. 2016 IEEE 23rd International Conference on High Performance Computing Workshops, 90-99. https://doi.org/10.1109/HiPCW.2016.021
- Tolubinsky, V.I., & Kostanchuk, D.M. (1970). Vapour Bubbles Growth Rate and Heat Transfer Intensity at Subcooled Water Boiling. Heat Transfer 1970, Preprints of Papers Presented at the 4th International Heat Transfer Conference, 5, Paris, France, B2-8. https://doi.org/10.1615/IHTC4.250
- Tu, J.Y., & Yeoh, G.H. (2002). On Numerical Modeling of Lowpressure Subcooled Boiling Flows. International Journal of Heat and Mass Transfer, 45(6), 1197-1209. https://doi.org/10.1016/S0017-9310(01)00230-7
- Unal, H.C. (1976). Maximum Bubble Diameter, Maximum Bubble-growth Time and Bubble-growth Rate During the Subcooled Nucleate Flow Boiling of Water up to 17.7 MN/㎡. International Journal of Heat and Mass Transfer, 19(6), 643-649. https://doi.org/10.1016/0017-9310(76)90047-8
- Wang. Q., & Yao, W. (2016). Computation and Validation of the Interphase Force Models for Bubbly Flow. International Journal of Heat and Mass Transfer, 98, 799-813. https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.064